Flex master vs Scanmatik 2 Pro clone. read-write edc17u01.you will be impressed by the performances!

[@sprinterfix]

your channel looks like its growing fast! congratulations!!

[@YOYODiagnostic]

Thanks 👍

[@daudajalloh6183]

Love all your video thanks

[@YOYODiagnostic]

👍

[@jesusdiazvalencia13]

Buenas noches la interfaz podrá leer protocolos pci bus de chrysler?

[@bestwreckauto1158]

Nice video. Getting Bosch ECU pinouts is very easy. when i do a search for an ecu pinout using the part number i do not get that many hits like Ford PCM150F ecu. Can you help by sharing information on how to get the model number and make of an ecu?

[@biologicalhazard552]

Minute 8, the reason it takes longer is because until 75% it is not actually reading the ECU but creating a dummy file with 0xFF for the first sections. The actual reading goes from 75%-100%. Flex is definitely slower. Also, for write operations Flex first checks ECU block checksums and doesnt overwrite them if they are the same as the target file, and that is why you think it is faster (because you are writing the exact same file you just read), but again, it is not.

[@YOYODiagnostic]

👍

[@johnhalm6020]

Hello, please any reason why my kt200 gives failure when identifying ecu but works fine in obd

[@mrl3524]

When I connect my sm2 pro and go to I'd ECU the first tab opens where you hit yes for the auto power part mine fails after I hit yes . Any idea why this could be ?

[@YOYODiagnostic]

Instal new windows 7 + software

[@mrl3524]

@@YOYODiagnostic using windows 10

[@mrl3524]

@@YOYODiagnostic it works and reads if I manually turn the power off

[@OFFGRIDHAMRADIO]

Thanks for all your time and videos my friend, I learn plenty from you. I have question. I try to read 2013 VAG Polo 7GV ECM on bench with SM2 Pro but it only identify successful but fail to enter programming mode ? I have 12,8V as power supply. I know there is nothing wrong with SM2 pro as I read and write Mahindra EDC16C55 change flash and eeprom data and it work 120%

[@jakemarks5753]

Does anyone know if the sm2 pro is compatible with the 2.5ltr 2010 ford focus st xr5 turbo not sure what it would be under or what module il need if I need one

[@mahmoudhantouli5434]

Hi i have a question for you i did cloned VW 17.5.2 & car not starting please let me know thanks

[@YOYODiagnostic]

Hello, First question is what programmer did you do this writing with. I wrote these ECUs many times even with FC200 and I had no problems. I copied flash and Eeprom after writing I used the ECU clone option. At VAG ECU This ECU clone option must be used. The second question is: did you read the data from the ECU after it stopped starting and compare them? Have you read in Bench or BDM?

[@tomislavrengel7825]

Greetings from Croatia. I've been watching your videos lately and I've learned a lot. Thank you for that. I would like to ask a question. What voltage is needed for bench mode? Is it the same for every ECU or not? I've just entered this world and I'm a little wary. Thank you

[@YOYODiagnostic]

@@tomislavrengel7825 Hi, 13-14 V it's recommended.

[@tomislavrengel7825]

@@YOYODiagnostic Thank you for your answer. I appreciate it. I'm going to learn a lot more from you. Today I received sm2pro clone and I was a little confused because I have gpt1 and gpt2 and on the pinout I found I need gpt0 and gpt1. I hope nothing can happen if I connect those two wires wrong. Thank you again and all the best.

[@branduncensored]

Scanmatic works on Bosch MED17.9.63 ?

[@YOYODiagnostic]

I didn't try it.

[@zoltanszucs9346]

SM2 clone is slower, ok it's not a big deal. But does it result in the very same downloaded (read) file? Did you check them with some binary compare tool? 🤔

[@nightsoulblackps]

Can you post more with scanmatik 2 Pro clone? Thanks.

[@YOYODiagnostic]

👍

[@mustaphaessahihi1762]

Hi thank you for the video I want to ask you about this new cable that they start to sell with the sm2pro. The one that has 3 led. What's important of it? Do you have any idea?

[@YOYODiagnostic]

I will have a look and give you real information.

[@mohdali4746]

Scanmatik sm2 can be read AND WRITE SAVELY BMW ecu 2020 DME MG1

[@mohamedhassan-8876]

Good video, but the time is not the problem, the problem is flex files are encrypted you can't edit it but pcm files decrpted you can edit it, please explain is this correct

[@YOYODiagnostic]

I don't understand what you mean by this comment. What Flex reads is exactly what the other programmers read and all the same. And by your statement that the data cannot be modified, this is not true.

[@Morteexx]

I love my KT200, done newer cars with it without problems :) Very good for the price, a few cars and you have a free tool :D Have kess,ktag and mpps clones also, just to save time on older ecu's with offline. I would had genuine if it not was just a hobby :)

[@YOYODiagnostic]

Thanks for info. 👍

[@partoems9376]

KT200 developer will create a new tool and you will have to go get the new one. The cycle continues.

[@sahnounn]

kt200 can read md1 mg1 ?

[@YOYODiagnostic]

@@sahnounn from what I heard yes. I don't have it and unfortunately I can't say for sure, I hope someone who has this programmer can answer you

[@sahnounn]

@@YOYODiagnostic sm2 can read md1 mg1 but with bitbox clone

[@henriquevieira9153]

With so many tools it’s hard to pick one. This one or kess clone?

[@YOYODiagnostic]

If you want to buy clones you have to buy both. What kess can do you can't do with SM2 pro and what SM2 can do Kess can't do.

[@vladalexandrucojoc921]

Hello If you had the posibility to choose between autotuner, kess 3 and flex which would you get?

[@YOYODiagnostic]

Hello, Autotuner has only one advantage, namely you don't pay for the update. You buy it and you can always update it. The downside to this is that you can't read the Dump separately like you can with other programmers. It cannot read Flash and Eeprom separately. For me this was a drawback and led me to choose the Flex. At the moment the Kess V3 is cheaper than a Flex but I was disappointed by the people at Alientech when they no longer allowed you to update the Kess V2. I consider this disrespect towards its customers because when you buy a product you want to use it more and not be forced by the company to change it when they want. Another reason that led me to choose Flex is the lifetime warranty of this product. Another advantage I had with flex was that when I was reading Japanese cars via OBD, many programmers barely had the protocol activated to be able to read in Bench or Boot. This is just my opinion and my experience.

[@vladalexandrucojoc921]

@@YOYODiagnostic wow thanks a lot , didn't know it like that.

[@YOYODiagnostic]

@@vladalexandrucojoc921 👍

[@charlychlonson8381]

What is the best clone version of Scanmatik, where did you buy your version?

[@YOYODiagnostic]

Clones do not have the best version. The best one is the one that works.

[@charlychlonson8381]

@@YOYODiagnostic It seems like your clone is working fine where did you buy it?

[@YOYODiagnostic]

@@charlychlonson8381 I make rework, it doesn't come like this.

[@charlychlonson8381]

@@YOYODiagnostic I didn't know that, will there be a video about that? I can soldering very well.

[@sahnounn]

scanmatik 2 pro clone can do checksum without problem ?

[@YOYODiagnostic]

yes it can do it but not on all ECUs. Don't forget that this variety was cloned by the Chinese many years ago.

[@massinissaautoscan]

thanks

[@YOYODiagnostic]

👍

[@joenitro9024]

Does the sm2 clone support chrysler sci-a and b ?

[@YOYODiagnostic]

I don't know.

[@electro-progghazi680]

👍

[@ameerbardien7623]

Paying 6000 euros to save a seconds

[@YOYODiagnostic]

@@ameerbardien7623 you pay so much money to work as efficiently as possible with all brands and ECUs

flex writes fast couse it skips sectors. kt200 makes this ecu faster than flex.

[@YOYODiagnostic]

Thanks for Info