The Perfect Cold Air Intake for a 2015+ Mercedes C300 W205 C-Class

[@blackgoku1355]

Yes!!! This was just what I wanted a good sounding intake without having to take the engine heat!! I’m definitely buying this thanks a lot flexx love your work!!!!

[@TheFlexxGarage]

It’s dope. Wish I could capture the sound while driving but the camera doesn’t do a good job.

[@blackgoku1355]

Flexx Alexander it’s all good man thanks for your vids, they help me a lot build my own C300!

[@aaronsun8]

where to buy？🙏

[@Oooooowow]

@@aaronsun8look up tornado tuning w205 it will pop up

[@a.j.infowars7582]

Where can I buy? Website?

[@Manny10mill]

Oh yeahhh I’m going to have to hit them up and grab that for my 2015 c300 I love how it sounds and it’s way better than the ones I been seeing online

[@TheFlexxGarage]

It sounds good. I like the fact that it’s covered and the filter is not exposed to the heater given off by the engine.

[@BC2FITTY]

Watching you Flexx inspired me to start modifying my c250 and start my own YT channel , thank you man !

[@junebanks4163]

About to tune in

[@702xRyder]

The BMS is exposed and yes it heat soaks alot and car is slugishh, k&n is cool and i noticed a little more response from the gas pedal, but it makes 0 noise man im jealous of the tornado. Great video

[@DailyPanigale]

Sold… Omg, I have a 2017 c300… air intakes never let me down.. this sounds awesome

[@TheFlexxGarage]

There’s a carbon version I did too.

[@Thomps-y2o]

i was going to get one that doesn’t have a cover and this is so perfect i’m about to order one, thank you bro

[@jordanhaddad724]

or u can get one that fits inside the oem filter cover box.

[@humzakhan2971]

Cant wait for your headlights video!!!!

[@treyseanirving1751]

Plung n play probably

[@courtneydupont3807]

Me too, the suspense is killing me

[@yahya-forward-07]

I just cannot thank you enough. you make the installation very easy and clear, that is what I have been looking for

[@TheFlexxGarage]

That’s how I do my videos. 😎🤙🏼

[@davidijames_]

Keep in mind viewers, when doing all 3 of these upgrades with the Gofastbits BOV the spacing gets very tight. I would recommend doing all of these upgrades at the same time. The charge pip would be the exception as it is very easy. with the turbo air intake I found I needed to do a lot of in and out (account for loom wires + sensor plugs). I suggest putting some markings (white dots) one where and what angles things should face. You also want to make sure all your clamps are easily accessable should you need to get MB to service something. All in all it is a very tight fit and not much margin for error. You find the wiring looms get shorter due to the slightly large piping, especially when you include the GFB BOV. It was great to have Flexx vidoes as most of this stuff you dont get any instructions. GFB is the exception.

[@AliCervnts]

Do you need a tune for any of these modifications?

[@a.j.infowars7582]

@@AliCervntsno

[@abesandoval1024]

i looked everywhere as well for a cold air intake and Just last night got me an MST Performence cold air intake. Hopefully sounds as good as this one plus my BOV.

[@youcefaggoun8936]

How they sound like ?

[@kophz4781]

How does it sound ???

[@BlaziNgHeiGhtZ]

I SO NEED THIS!!!!! 😩😩

[@bryanguerrero9750]

I love your videos, Man thanks for the information

[@TheFlexxGarage]

My pleasure!

[@bryanguerrero9750]

I have one, and I want to keep updating it. I love this car man.

[@dinyardalal]

Excellent video. You speak very clearly and at the right speed. Your video quality is excellent as well. I have to ask you a question: We have a 2017 GLC300. I have asthma and my wife has pulmonary fibrosis so needless to say we like to have the cleanest air in our car also. There is a very bad smell coming from our car's AC. I turn the AC off to get the condensation out but no help. My question is that if the procedure you so nicely showed in this video is same for my MB GLC300? I will greatly appreciate your help. Thank you.

[@TheFlexxGarage]

This video has nothing to do with cabin air quality. This video is about air that goes into the engine that burns up with fuel. You need to do something like this. kzbin.info/www/bejne/rniwfWqnj66eo8Usi=ZJbnuPk8m9xI8lRo

[@thfreakinacage]

I feel like they should have put the hole for the sensor wire on the other side. The cable would be more relaxed and not have to turn through such a sharp angle. Apart from that it looks like a great bit of kit :)

[@muhdsaaduali1749]

Do u ever think of upgrading the steering wheel to d latest one?

[@taps_r7]

yo flex, how much HP gains have you gotten from the intake kit, the intake tube, the BOV and the turbo charge pipe? i’m just wondering if all of this will add around 20hp or so or if i’m way off. please let me know!

[@TheFlexxGarage]

Go watch my recent Ask Flexx video. The answer applies to my w205 as well.

[@taps_r7]

@@TheFlexxGarageigh thanks

[@gordyene]

Exactly true👍🏼

[@malikramirez5728]

sound video bro.we need a sound video driveby

[@Slangerboy]

What happens if my mass flo sensor grey clip breaks?

[@TheFlexxGarage]

Probably gonna need to cut off connector and splice/solder in a new one. 🤷🏻‍♂️

[@calavino223]

I wonder will this product fit to the GLC m264 engine variant?

[@Pkdimmock]

I just got a new air filter and air intake very similar to yours. Problem is I cant get the oem filter cover to come out of the plastic oem turbo intake pipe. I've loosened the clamp, removed the 2 screws. Its loose but wont come out. I tried using a screw driver like you did but am I gonna have to remove the turbo intake pipe too just to get the cover off to replace it 😅

[@roccor.189]

Hey man, I just installed the tornado tuning intake in my car. I have noticed now that there is a lot more smoke coming out my exhaust. I’m not 100 percent sure if it is because of the intake of something else but I was wondering if you ever noticed more smoke coming out the exhaust during the winter time with the new intake installed? Thank you.

[@TheFlexxGarage]

Intakes usually have nothing to do with the exhaust. However, if an engine is not receiving enough air to mix with fuel, that could cause a lean burn…which would be black smoke. The filter would have to be like majorly restricting airflow which I can’t see happening. One of the cars sensors would have throw a check engine light. Have you tried installing your stock intake to see if the problem goes away? That’s the easiest way to see if the new intake is the issue.

[@Oooooowow]

Flexx quick question as I’m planning on ordering this from TTS, did you need to oil the filter cone before installing? If you did what oil brand did you use, thanks!

[@TheFlexxGarage]

No. Cottons filters don’t really need oil. You can do it (like K&N does) so the oil can capture more dust and debris but excess oil can get sucked through the intake system which is a no-no. I just leave my filters dry and wash them with dish soap/water like twice a year and let them air dry before reinstalling. The filter from my intake from IE on my tuned A4 is also dry. Doesn’t require oil. Just wash with soap and water and dry.

[@BilalAsmar-z8p]

Hey,do I need to get the air intake tube and the turbo charge pipe to install the intake or can i jump strait to the intake?

[@TheFlexxGarage]

Anything can be installed at anytime. By itself or as a kit.

[@markesquivel6660]

I followed your advice and took the chance on the USR LED headlights, and it's been working perfectly - Thank you for that. Does installing this cold air intake + the BOV from your other video turn the check engine light on? Just want to know beforehand if it does.

[@TheFlexxGarage]

no issues as long as just the cold air intake with filter, and the BOV.

[@willardbayjingzhi8156]

Hi flexx is it necessary to remove the battery connector when installing this CAI?

[@TheFlexxGarage]

I do it for any install that’s in the engine bay or any install that has to do with electricity. Cause during an install, I don’t want to accidentally touch/knock a sensor/electrical component and cause a spark or short in the system. And no, I’ve never ran into memory loss issues after disconnecting a battery. (On multiple cars I’ve never had that issue).

[@vajikowiklauri5427]

the ambient lights turned on everytime?

[@57RollsRoycePhantom]

🔥🔥🔥

[@sl0ii]

Do you plan to upgrade the turbo in the future??

[@a.chovak7934]

Hi, could you please show me or say me how can i check power steering fluid on W205? Thanks

[@bosh7260]

Flex why do you always cover your left arm?

[@TheFlexxGarage]

I been having laser sessions to lighten my tattoo so i can get something new. So I need to protect it from the sun and prevent from scraping my skin while working on my cars.

[@TheFlexxGarage]

And...it might just be my new style. 🤣

[@tyanedaley1480]

Hey man, first off I love your videos. But I recently bought a 2017 C300 Coupe and was wondering if there were any negative side effects of putting a Blow Off Valve on it.

[@TheFlexxGarage]

No issues as long as you get the right one. VTA is probably the best one for our cars. Don’t try to get the ones for Japanese cars.

[@tyanedaley1480]

Flexx Alexander Which do you recommend and also do you know if it voids warranty?

[@migueldiaz106]

@@tyanedaley1480 all aftermarket stuff voids warranty think about this way Mercedes makes the car to spec so all the components work together perfectly but modding it removes the original parts and replaces them with aftermarket ones now if something was to go wrong due to the aftermarket piece why would Mercedes pay for it?

[@_topikk_]

@@migueldiaz106 Simply having aftermarket parts does not void the warranty. If the damage is the result of the modification, that's a different story.

[@TheFlexxGarage]

True but every damn dealership is gonna do everything in their power to blame your aftermarket part…even if it’s not the cause of an issue. So indirectly, installing an aftermarket part basically voids your warranty.

[@patrickriyad7147]

Is that with the stock blow off valve? Great video

[@TheFlexxGarage]

thats the stock diverter valve. A new one is going in next

[@jorgeshop1734]

Saludo amigo donde puedo comprar una de esas

[@jorgeshop1734]

@@TheFlexxGaragesaludo amigo donde puedo comprar una de esas

[@shadowshooter2000]

Hey. Not sure if you did anything else to your turbo but I ordered the same one from tornado installed but doesn’t have the sound that yours gives off. Any thoughts??? Thx

[@TheFlexxGarage]

I don’t remember if I did this mod before or after the blow off valve install. You need to go to the w205 mods playlist. As the mod videos are in order.

[@a.j.infowars7582]

He must have installed a blow off valve.

[@jpbredenkamp5091]

Almost 50k!!

[@PedroRodriguez-ks1wp]

Hi this is Pedro I been watching yours videos and I would like to have upgrade my 2015 Mercedes Benz C300. Quick question Where I can buy those parts? Like cold intake, and all your upgrades please?

[@TheFlexxGarage]

Are you really watching? Hahahah. Cause it’s clearly explained in every single video to look in the description of the video for where to get the part shown in the video.

[@-hcm413]

Mods to add more power and sound for my w204 c220 2012 currently with stage 1 and mufflers deleted?

[@rossclaytor582]

Have you ever considered X piping your c250, i have a c250 and am considering doing that

[@TheFlexxGarage]

No point. A c250 only has 1 pipe from the main cat. Why would you wanna split a 1 pipe to 2 just to do an x pipe? The only reason you should be splitting 1 to 2 is for looks like a quad tip. X pipe only make sense for cars that have 2 pipes coming from the main cats

[@Kiyotxka]

The video is 4 years old, are these still being sold?

[@TheFlexxGarage]

Yes but there’s like 3 versions. I did a video on each of them over the past few years. There’s a version with a Black cover, faux carbon cover, and a real carbon cover. You just need to email tornado tuning and request pricing on which you want. Info in description.

[@RalfysHobbies]

Yo Flexx quick question did this make your check engine turn on? I did the intake /turbo charge up grade and it keeps popping up. I took it to the shop and the mentions something about the wire that goes to the intake loose and recommended going back to stock

[@TheFlexxGarage]

Nope. No issues. Thousands of people bought and installed this and barely any issues. If there’s a check engine light, then there’s a specific code that could be pulled from that that will tell you the exact issue. Sounds like they just wanna blame the intake (cause it’s easy to blame an aftermarket part). If I were you, I would of just taken the car to an auto part store, have them pull the code for free and see what the real issue is and go from there. Did you even get the fault code from them? Hard to believe an intake wire caused a check engine light.

[@RalfysHobbies]

@@TheFlexxGarage appreciate the fast response man. That’s what I figured it sounds like they are just blaming that . The code I’m pulling is P04F0 something about evap but I just read a comment you had replied to saying to contact tornado tuning that they have a solution

[@TheFlexxGarage]

Did you transfer the large rubber o-ring from the old charge pipe to the new charge pipe? Cause I forgot to show that in my charge pipe video. I did show it in my carbon charge pipe video.

[@TheFlexxGarage]

Also, if you also installed the “elbow” shaped pipe from an aftermarket dealer, the sensor might be defective and causing the issue.

[@RalfysHobbies]

@@TheFlexxGarage I’m pretty sure I did but not positive since I did it a while ago but I’ll check my stock charge pipe and see if I did. I’ve only done the intake pipe ,charge pipe and filter ,blow off valve so far same as your from tornado. I just want to resolve the issue before I upgrade more parts 🤞🏽

[@Thomps-y2o]

yessss bro thank you so much

[@cantbefaded83]

@flexxgrage 2 questions flexx please respond. 1 .. it this mod for cold air intake ginna pass smog in california. 2. will i need to tune the car for the extra cold air

[@TheFlexxGarage]

1. Don’t know. You need to check with Cali regulations. Most mods are designed for “off road” use only when sold in Cali. 2. No.

[@junebanks4163]

Have you ever upgraded the turbo ? Or tuned at all ?

[@TheFlexxGarage]

Go to my w205 mods video playlist. Tune is there.

[@HollowTpZz]

there a link to this? can’t tell which one it is on the website

[@TheFlexxGarage]

It’s not on a website. That’s why in the video description it clearly states to contact tornado tuning directly if you wanna buy it. Email them what you want, and they’ll walk you through the purchase process.

[@Abdoul1M]

After doing this do I need to install anything else ? Like turbo or turbo charge pipes

[@Abdoul1M]

Can you do this on the 2015 year too ?

[@Abdoul1M]

?

[@mohamedwisam738]

Which intake is better MST or TTS for performance because i already have a BOV installed

[@TheFlexxGarage]

I’m not familiar with MST since I’ve been only sponsored and only used all of TTS products. All I can say is the TTS products been pretty good but keep in mind that “intake kits”…regardless who makes it…is not really a noticeable performance enhancer unless you really build up you engine. Only advice i have for intakes is make sure it’s a shielded/covered air filter or it will heat soak and you’ll lose performance.

[@nickherter6891]

I have a 2016 w205, if I do the air intake, turbo charge pipe and blowoff valve do I need to tune my car??

[@TheFlexxGarage]

I didn’t. It’s not like the car is receiving more air. It’s just getting colder air and purging excess air.

[@farisamin4435]

hey flex, i installed this on my 2015 c300 and got a check engine light, they supposedly have 2 variations of this air intake.

[@TheFlexxGarage]

Did you only install the Air Filter Intake? Or did you also install the curved Intake tube?

[@jamaicaz89]

@@TheFlexxGarage are you supposed to get the curved piece too?? Cuz I have a light for my pcv now

[@spliffertons]

I’m tryna do this but I don’t want check engine light

[@keyan7805]

Great vid you should install a blow off valve!

[@TheFlexxGarage]

thats the stock diverter valve. A new one is going in next

[@ukno858]

@@TheFlexxGarage please upload that video cause I couldn't find a decent one anywhere

[@dl85927]

How to clean this bad boy? If it needs to apply oil like K&N, the oil will damage the MB air flow sensor.

[@boostedbenz5800]

Do they have turbo muffler deletes and diverter valves for the 2017 c300?

[@newtongsm]

For C300 m274 www.c250tune.com/for-mercedes-benz-w205-w213-c250-c300-tornado-charge-pipe-and-intake-pipe-combo

[@santiagovanegascano8574]

Hello flexx, I bought the USR headlights for my w204, and I dont know where to go to install it, do you maybe know a place to install it? I live in east boston MA, thank you flexx, I love ur videos

[@TheFlexxGarage]

The only place I know that does good work is Boston Mechanics in Norwood. They do a lot of installs like I do in my videos.

[@santiagovanegascano8574]

Thank you so much flexx, I will reach them to do so, thank you.

[@santiagovanegascano8574]

Hi Flexx, I recently bought the USR headlights for my w204, could you give me information if I can use LED bulbs, and if you know about them, where can I buy them? thank you very much.

[@pedrolawrence1945]

Can I use this on my 2016 e350?

[@lilfendiiofficialpage]

Hey does anyone know if there is an after market air intake for a 2014 c300 sport im having trouble finding air intake that takes the little sensor I’m not sure if it’s the MAF sensor or if it’s a different air sensor it’s a small sensor that’s plugged into the intake tube

[@ChinoantraxV]

My air filter came without a sensor?

[@antoniocorleoneiz6797]

Did you get any lamps on the dash??

[@TheFlexxGarage]

Nope. It there was, I would say it in the video.

[@johngutierrez3171]

Can I do all the things you did on my a35

[@scottp2440]

dose this work on a 2017 E300

[@adamkhan6861]

Would this intake work on a C250d in the UK ?

[@TheFlexxGarage]

You need to ask tornado tuning.

[@000219]

Is there one for a cla from.2014

[@urieltazz281]

Did the intke mde it do that sound or do you have a bov?

[@TheFlexxGarage]

intake does

[@Damfacey]

Where did u buy the parts

[@TheFlexxGarage]

Look in the video description

[@Zakwak5]

do you need to flash the car computer after? since its getting in way more air?

[@TheFlexxGarage]

it's more into the turbo...not more air into the engine. The diverter valve will release the excess. It's not that big of a difference to require a tune. The performance/response gain is from the air being colder...not more air volume. The system will automatically purge excess air that's not within the sensor's limits.

[@Zakwak5]

@@TheFlexxGarage that’s what I needed to hear! I was iffy on ordering one and now that you said that I will!

[@stephenmiljkovic5584]

If you have a stage 1 tune, with all these mods can you get anymore HP?

[@johngutierrez3171]

Does this part work for a a35 amg

[@snipeguy08]

Exhaust upgrade next time????

[@soto575]

Can I install this kit on a 2016 C220d Mercedes benz?

[@TheFlexxGarage]

Don’t know. You need to reach out to tornado tuning and ask them.

[@jamaicaz89]

Did this affect anyone else pcv ?

[@ziadhassan7312]

Does anyone know if this will fit on a W204? It's the 2013 3.5L V6

[@TheFlexxGarage]

No

[@SaadzC8]

Are you gonna be putting exhaust too? Or straight pipe?

[@TheFlexxGarage]

Yes. And no. Straight piping is illegal and causes so much droning. Will be annoying to drive with.

[@SaadzC8]

I have 2016 w205 I just removed the muffler and it sounds pretty good.

[@702xRyder]

@@SaadzC8 u got a video ?

[@argumedito96]

@@SaadzC8 damn wish I could hear that!

[@franciscobaquero5153]

@@TheFlexxGarage waiting for that exhaust video!

[@winstonthomas8764]

Can you tel me where to get the intake from thanks 🙏

[@TheFlexxGarage]

As mentioned in the video, please look in the video description.

[@iPiss_Greatness]

Blow off valve installed too or no?

[@TheFlexxGarage]

kzbin.info/www/bejne/fmK7nGivod-nbac

[@andychoo1312]

I m in Sydney , any chance to buy this filter

[@TheFlexxGarage]

you need to contact Tornado Tuning and see if they ship there.

[@AaronEscamilla-y7e]

Where can I find one like that intake

[@TheFlexxGarage]

Look in the video description.

[@anthonyromero1101]

Can you do a blow off valve next please

[@TheFlexxGarage]

It’s coming

[@alexvalerio2092]

Bro what type intake like is there series number or part number

[@TheFlexxGarage]

Look in the video description

[@AliCervnts]

Will I need a tune after I install this intake ?

[@TheFlexxGarage]

No

[@Avileserick]

Where did you buy the intake

[@TheFlexxGarage]

As mentioned in the video, look in the video description.

[@Avileserick]

@@TheFlexxGarage thank you

[@domenicsmith6229]

How do you order it? How much is it?

[@TheFlexxGarage]

look in the video description. You need to contact Tornado Tuning.

[@nicknick6960]

Do they make for w204?

[@TheFlexxGarage]

I already made a video on that for the C250. kzbin.info/www/bejne/b56WaWOnf9iBiqc

[@raysekulic1266]

The filters coming from TTS don't have the sensor port. Completely different filter. On the website they show different set-up but show your video to install them.....

[@TheFlexxGarage]

Yeh. You got the brand new improved version. Your oem sensor plugs into the top of the cover now, not into the filter. I just got that filter as well. It’s in my latest carbon fiber intake video. kzbin.info/www/bejne/lWfQfqyDptiImck

[@rugzythc2610]

Has anyone got a check engine light from one of these

[@dallasjones6883]

will this work for my c43?

[@TheFlexxGarage]

No. You drive a c43. You should know already that it’s not the same engine as a c300. Lol.

[@FerdiResmi]

i need that for w213 -_-

[@AlienVolt]

How much HP and torque have you added to this car now?

[@TheFlexxGarage]

You will see in a few weeks

[@johnc7495]

What’s their website

[@TheFlexxGarage]

Look in the video description on how to buy

[@rillblast5702]

Where can I get that air intake?

[@TheFlexxGarage]

as mentioned in the video, look in the video description

[@blastingviper]

What part of mass you from I am from mass ass well

[@ДмитрийОса-е6х]

For what this?

[@jamaicaz89]

Engine light anyone??

[@carmenmunroe2499]

Kai

[@StalloneSRB]

I never cared about how it looks, just how it preforms..

[@mattmvp0020]

hey flexx, was just wondering if tornado tuning had a legit site. i found a few selling their products but was just suspicious.

[@TheFlexxGarage]

In all my videos with tornado tuning products, I only tell you to contact them directly. That’s why their contact info is in the description. I never share a link unless I got it directly from tornado tuning.

[@ehtiramhumbatov5301]

From where i can get this? Link?

[@TheFlexxGarage]

There's no link. As mentioned in the video...all the info is in the video description.