Flipper Zero: How To Run Marauder on the WiFi Dev Board

[@frog2647]

I'm pretty stoked to see that you have a flipper and are part of the community! Thanks for the video as well as all the time and effort you've put into the project so far. :) You're awesome!

[@JustCallMeKoko]

My pleasure. I’m happy to be able to contribute

[@lcrince]

This is amazing, So lucky you are part of the community!

[@Medina1487]

Just came from an IG reel about your 3-D printed pano nvgs. Subbed!!

[@colemanfree4152]

love the video! wish I had it when I was first setting things up just to see. for instance the way the dev board was labeled messed me up initially. figured it out though lol. keep up the great work brotha! looking forward to ordering one of your marauders.

[@KINGTRE_]

that happened with me to and then it got to 100 percent and said it failed but it still worked

[@fomsad123]

I LOVE this but I think one thing that should be noted is if you're using PuTTY on a PC you need a baud rate of 115200 to get the Marauder firmware to come up correctly. (I actually found it in Flipper Zero's documentation) Other than that, this is AWESOME! Great work!!

[@azaanbot3333]

this is the type of thing someone would say in a movie and then someone else would go like “in english now?”

[@SkinnyMuscles69]

@@azaanbot3333 seriously

[@tmonie]

Hey man, so I'm actually experiencing this issue right now I think. When I try to connect via COM, I keep just getting the flipper and none of the commands look like they'll initliaze the maurader software. Any ideas? I did try your baud trick.

[@lemelmccutcheon4335]

@@azaanbot3333 do it work on atms

[@azaanbot3333]

@@lemelmccutcheon4335 am i talking to a future criminal

[@ross9170]

This made me properly laugh whilst watching. Not only incredibly informative but also incredibly self-deprecating. Made my day mate.

[@JustCallMeKoko]

If any thing, I think I talked myself up lol. Thanks for the support

[@josedelfuego]

Awesome video bud, I just bought the flipper and I am looking forward to conducting some learning projects thanks for the information bud. I am knew to this so I hope it is not to daunting to learn. 😅

[@spacehuhn]

duuuude the jokes in this video are killing me

[@JustCallMeKoko]

Haha what jokes? This video was 100% serious

[@VeridianKnight]

SPACEHUHN?!?!?

[@SteveStonebraker_brakertech]

@@JustCallMeKoko dude this happens to me all of the time. I say something and i am dead serious… and the whole room starts laughing. I play it off like i was trying to be funny… but i wasn’t… i was dead serious

[@User00571]

Bro, are you alive or killed

[@UnTamedMustang]

"Slash 3 tites, dont do all4" Hahaha. So that way can watch them say "fuck it, ive still got 1" Allwhile shredding the tire and flumpig around. Flump. Fpump. Flump.

[@HasHHasHBaby919]

ive actually found your page your like a legend in the game

[@camsoup101]

Hey just found your Channel you're doing some really cool stuff and I would love to see more content from you keep it up bro!

[@JustCallMeKoko]

Thanks I appreciate it

[@sebastianmittelman4071]

This is fantastic, i've aways wanted to learn how to do this (by always I mean, ever since I got the flipper zero). Just started getting into maker making, would be keen to hear your perspective on how to get started started, what concepts you need to learn, what tools you need toget started and progress and upskill. Cheers!

[@JustCallMeKoko]

It really all depends what specific proficiency you want whether it's with networking, software/firmware development, etc. Generally I would say you should always get familiar with a couple different flavors of the Linux OS and its command line and learn some scripting preferably Python. But beyond that, just find KZbin videos of projects you think are cool and try to build it yourself. It will inevitably result in you learning the skills required to finish the project.

[@sebastianmittelman4071]

@@JustCallMeKoko interesting, thanks man! I shall follow those instructions!

[@pyrophreak2600]

Look for a Bsides conference in your area or attend Defcon in Las Vegas. They have a hardware hacking village also some places have local hackerspaces. Depending on where you are located at.

[@sebastianmittelman4071]

@@pyrophreak2600 thanks, this helps too.

[@A.H.A.B]

My dad taught me how to do all this back in the early 90s, don't know how he knew but he told me one day there's going to be a device called flipper zero and that I should know what I'm doing, he was my father but I just called him koko.

[@MartianMoon]

almost spat out my drink at the intro when you said "or social skills" 🤣🤣

[@cemaxecuter7783]

I’ll have to get the dev board and add it to my kit. Thanks for sharing!

[@JustCallMeKoko]

Yea man P1

[@Parkrone]

Great video dawg 🤘. Imma pull out my flipper zero again

[@pyrophreak2600]

There is a new July 2022 firmware update for the Flipper. So you should pull it out and update that also.

[@michaelyee7660]

Great vid! Did nobody else see you jump cut from beard to no beard nonchalantly? Smooth

[@chiragstech5511]

Awesome video as always 😇

[@theamvslayer6154]

Just 10s in the video and I am already hooked😂, awesome combination of neddy stuff and jokes👍

[@JustCallMeKoko]

Scares people away irl but lures people in on the internet

[@georgelorimer9452]

Haha you are excellent at presenting and editing ...well done

[@JustCallMeKoko]

Thanks I appreciate that

[@georgelorimer9452]

@@JustCallMeKoko you're awesome keep up the good work!

[@georgelorimer9452]

@@JustCallMeKoko it's the truth I can tell you put in the work

[@r4zzzy]

This video is absolutely GOD TIER 🙌

[@NovaSaintz]

Great video bro, love it.

[@iblackfeathers]

this is a good complementary video to simplify the documentation as probably a few people may have stumbled after the wifi configuration part. the steps of using the usb serial interface to connect to a rebooted dev board wasn’t that clear, depending on which site or page the instructions you were following were on. lastly, some non-ios “android” users may be using a locked down phone such as grapheneos on a pixel device, which essentially disables any terminal and usb to serial interface functionality. in that use case, another android phone or a portable computer might be needed… so, i’m currently eyeing a oneplus 7 pro since might as well install nethunter while i am at it. :)

[@JustCallMeKoko]

I did end up going back and adding some more verbose instructions for the physical connection on the github page. This is very recent so hopefully folks will find it helpful

[@iblackfeathers]

@@JustCallMeKoko thanks 🙏

[@pyrophreak2600]

If you're going to install Net hunter you may consider getting an external TP link wireless card. It can do similar things as the dev board but you get an ITG cable and velcro it on the phone

[@mastercommie]

Having this issue I think, Pixel 6pro cannot see terminal commands while in the esp32 app but can use them for the flipper in general. Any help would be appreciated. Running xtreme if that matters.

[@souyxx]

@@iblackfeathers I would love if you educated me on this😭

[@myfaveyoutube]

Thank you very much for your work

[@timothymcbearington9692]

Awesome video! I am super interested in using this setup but pushing it a bit further so you can run a few attack macros with the flipper dpad and screen.

[@JustCallMeKoko]

Some dpad macros would be pretty sick

[@pyrophreak2600]

You can do some control in the android app. I think its listed under the experimental section of the app.

[@aa-nk8zx]

You're awesome. Love your stuff

[@FreeSpirit-0001]

Cool ! Thanks mate ! Good video ! Get some rest you need it more than I do 😂

[@diegorr94]

I bought from you an amazing dev board case

[@JustCallMeKoko]

I hope you like it

[@Kion1972]

Thx for the video. Question, Is there a way to reset the ESP32 Wi-Fi Dev Board to factory settings, using a Mac? I’ve researched it and the info given, is not working? Or do you recommend trying to get a hold of a PC , to reset?

[@chubbyzombie666]

Great video, I just subscribed

[@johngarfield702]

I subscribed 15 seconds into this video lmao. And that was before I recognized you from your handle as firmware bae

[@AndyDeiu]

Woaaaaaaaaaaa 😅 are you Koko ? 😵‍💫😵‍💫😵‍💫 latest stuff with the dev board is amazing

[@olivertelling9006]

I get you.. waiting on my board.. your vid help me out

[@1CrazyIvan]

Im one minute and 3 seconds in and you got me ! NICE!!

[@4esv]

That's a record, no other channel has gotten me to sub in the first 30 seconds.

[@JustCallMeKoko]

You see the pain in my eyes. That’s what does it

[@dennismaykowski5201]

I don’t know what you’re up to….but I like the way you do it.🤔

[@JustCallMeKoko]

I am also trying to figure out what I'm doing

[@sir_awny]

U won my subscription!

[@maxfpvaustria9433]

Awesome Video, i will give the mobile setup a try, looks interesting :) Keep up the good work 👌👍👍

[@JustCallMeKoko]

Please do an let me know if you have any issues. Feel free to join the discord server if you need any help as well. I plan to make a video about this but there is also the Unleashed flipper zero firmware which has a companion app. This app will allow you to use Marauder without the need for a mobile phone or PC

[@maxfpvaustria9433]

I'm using the Unleashed Firmware, in the Unleashed app everything works well but when connected to the smartphone it doesn't take any commands (check discord, i posted in the marauder support channel) :) friendly regards

[@BamboozledHandboozled]

Its nice to see that my fav youtuber also has a flipper since I have my own dstike deauther watch

[@JustCallMeKoko]

Hell yea I think I have 3 deauther watches now lol

[@BamboozledHandboozled]

@@JustCallMeKoko you inspired me to learn more of the world of technology ☺️ Im glad I came across that video about your watch years ago 👍

[@JohnnyCiocca]

Hahaha! AWESOME. Thanks for the vid. I just got my Flipper last week, and already played around with NFC and SubGHz, still looking into what I can do and learn with it. I've never done anything too technical, you have any tips on what a noob should look into?

[@eckersplode]

These jokes are my kinda comedy, subbed and looking forward for more!

[@JustCallMeKoko]

I'll get my ghost writer right on it

[@eckersplode]

@@JustCallMeKoko LMAO what are you, RiceGum?

[@arthurbfr]

This is awesome!! Thanks for making this

[@alikhurshid476]

Inspiration. Would you sell your marauder design built? I have no idea how to even start. Unless you do private 1 to 1 lessons. Great content.

[@browalk4541]

So I can't upload the file to the devboard, all I get is "exit status 1" which should indicate that i have to wrong port selected in IDE But I'm on the right port (the ESPS32S2 Board) and i still get it, what's the cause of this? Should i use a newer version of the esps32 by espressif? Thanks in advance and besides that very helpful video :)

[@fredrikzels2637]

This is an amazing tutorial. One question, what are the other url's that you have there?

[@zaccampa4055]

I’m a huge fan Koko!

[@JustCallMeKoko]

Happy to hear you're enjoying the content

[@datamindly]

Hello Koko, thank you so much. I hope I will manage it. One question so far during the process: I can find on ARDUINO IDE App two different esp32 boards today, but non of them includes the specific one 2.0.1-RC1, you refer to. Therefore, I do not have the needed port. What do you suggest? Sincerely, Balint

[@muffinberg7960]

30 seconds in, I already like you.

[@JustCallMeKoko]

Just wait until you see the rest of the video...it's way down hill

[@muffinberg7960]

@@JustCallMeKoko then you might be happy to hear that I didn't watch much of after the first 30 seconds. I was on foot so had to put it off to my watch later list. Additionally, till I'm back to watch this video of yours, in the meantime you might want to pump more content. So when I'm back I can watch them all in one go and binge on it. I would personally like that, if you could arrange that for me.

[@anthonycastro7718]

After installing the esp32 2.0.0 rc-1, step 5 and 6, do I need to install the 2 drivers listed in the instructions? Cause on the video it does not say that.

[@fyourface9221]

woot got it working, thanks

[@JustCallMeKoko]

my pleasure

[@A.H.A.B]

I installed the easy version but I think I figured out the issue I was having earlier, how would I get your method flashed on it? Is there anything I have to do or can I just go ahead and start the process on arduino.

[@alinayossimouse]

Is it normal that over the serial connection there is no echo and commands will be automatically submitted after a second of no input? I'm finding it very stressful to not be able to stop and think while typing because I can't even wait for a second to think before finishing my line or it'll be executed and in the best case it's incomplete and invalid, in the worst case it happened to be valid already and I did something I might not have wanted to.

[@Pwnagotchi-0]

😂 your videos are amazing 😂

[@DallasTJD]

Give us some more flipper zero videos!

[@JustCallMeKoko]

Working on it

[@asdasd-yr7wi]

you had me at "social skills"

[@JustCallMeKoko]

Normally that's how I lose people

[@nottherenotherenotanywhere]

do you have a link to that 3d printed case for the dev board? getting mine in the mail soon and am terrified of dropping it and making a 30 dollar mistake

[@daemoarkenstone7261]

Koko! Please answer this question it's killing me! When using terminal on Android to control Marauder, how can I get it to save the pcap files on the SD in the flipper? Or at least get it to save pcap files somewhere?

[@mr.majnu1419-od8vx]

Finally I got it

[@KirballsKeys]

Any chance you could integrate SSLstrip into marauder?

[@thewailer]

what if i installed the wrong version of esp.32 and not the rc1 version, but then did after? do i have to undo the wrong file? how so? or is it fine with both?

[@mysticscrim2791]

Is there any link to the specific PuTTY that you used in the video?

[@DaymnDotEth]

hey I setting up my Filipper zero and im follow the directions on your github, the CH340X driver is for Windows and im on Mac, is this essential? will it work without it?? or do I need a PC to do this?

[@pinkeye00]

1:57 -> missing beard, haircut (?), shirt change, and light change. :) gotta love those deep multi-day cuts.

[@MarcellJjr]

What do I place in the command line to bring up the actual program?

[@gaarasama1719]

how can i detect card skimmers a the gas station with the flipper zero and esp32 wifi dev board? i heard you can do this and have been researching it all day.. i came up with stuff that leads me to believe that i need flipper , wifi devboard and a pc to accomplish this? is there a way to do it with just the flipper and wifi devboard? I have roguemaster firmware on the ol flipper zero and wifi marauder on the devboard

[@CRsquared64]

Does this/ will this have ssh support? I feel it would be perfect for use with the zero if you could connect wirelessly and would allow IOS users to actually do stuff

[@jonatanjas]

veeery helpful!! thankss!! what's the cmd line for one of your macros? or how do you access marauder command list, my "help" action displays flipper's options (I used the Flasher Script)

[@JustCallMeKoko]

If you are seeing the flipper commands, you are on the wrong USB channel

[@jonatanjas]

@@JustCallMeKoko thanks for such a fast reply! I tried changing the USB-UART Bridge setting from the GPIO option menu, but seems buggy since the changes I make are not persistent after closing this option, I'll keep trying some workarounds, thanks again!

[@freesfifreesfi1223]

Hello. I followed the video and Installed all the software. I can connect to the flipper zero using PuTTY, but i don't know how to start the Marauder software. Could you please help me.

[@xeon_one]

Quick question is there any reason we can't use 2.0.3 vs 2.0. 1RC1 for the Marauder OTA And there are two new ones out call FZ Marauder Flasher, FZEasyMarauderFlash would you know witch one has the most utility in them? Thank you for your video doing a very good job on them.

[@BrilliantVisuals]

yea i want to know about the 2.0.3 vs 2.0.0 rc1

[@fescountcristo9256]

Thanks!

[@JustCallMeKoko]

Thanks for your order and the tip. Hope you enjoy the content

[@scottwilliams2087]

Made it all the way through the instructions but when I try to connect to the MarauderOTA wifi using the credentials provided, I get a message saying "Can't Connect to this Network". Not sure why. Anyone get this an know what to do?

[@chestercopperpot9294]

I liked the Moxie t-shirt

[@JustCallMeKoko]

A touch of culture for the masses

[@minibikemadman]

just flashed my 9$ esp32 from Amazon with marauder. let the fun begin.

[@sh4ba]

mine keeps coming up with a error code everytime i try and even when i plug mine in it doesnt have the dev board in the port section? im on mac

[@ericcelrosu2912]

mine its stuck on 11% when updating the bin file on that url, what do you suggest?

[@jonahhusser6516]

Why not have pre written code saved on to your or make a app for it?

[@paulandrus1451]

bout 30 seconds in i was like this guy is alright lol

[@BenKDesigns]

Cool concept...but what can I do with flipper+marauder+serial on Android that I can't just do with some other app directly on Android?

[@pirshahzeb2571]

Ok i want to use marauder frimware on esp32 board without screen and flipper zero, only using mobile phone where do i find the firmware kindly plz guide

[@tomaspinto3833]

so do I need a pc with wifi for this? 3:58 or when I connect the ESP32 to the pc Its enabling me wifi?

[@lorenwalding9785]

I know that bruteforce is not an option, but what about dictionaries?

[@Neo_GG]

Small question, is this needed to be installed on the wifi dev board to be able to utilize the Marauder companion app from the unleashed firmware?

[@JustCallMeKoko]

Yes. This is what that companion app was made for

[@igorpassos3443]

is it possible to use esp32 marauder without flipper zero?

[@landoflibertyftw]

im able to connect but when isend commands nothing happens except the number next the B goes up and the LED light blinks. whats going on?

[@joeyhorror4749]

I know this is a dumb question , but I am stuck on 3:22 on selecting the port by the wifi dev port. What is that? :/

[@bubbanewton617]

im still receiving the error " exit status 1 Compilation error: exit status 1" i did notice it pop up in the video- is that right? the wifi ap does not show up

[@HVAC_Tips_Tricks_Calcs]

Things must have changed. Cant find the upload page where it says 'blue pill' / 'red pill'. Do you happen to have an updated link? Thanks.

[@lbrown.2232]

what kind of cord is used to plug in your wifi dev board and how is it acquired? does it come with it when purchased? i haven’t bought the board and was wondering if it is with it or separate.

[@JustCallMeKoko]

It's USB-C

[@JR-hi2fw]

hi could you help? my module isn't appearing in ports... I'm using Mac Thanks

[@GulfCoastOverland]

I have a few questions, Am I supossed to have a bunch of links in the board manager URL's, I had zip, zero, and I downloaded the 3.0.0a version of esp32 by espressif systems, am I going to die. will those work, I am not a software guy so this is all new to me. Thank you.

[@sideswipe147]

@ 3:00 Why that package? That one only? As opposed to a later release where more issues may have been patched? This video IS a year old. Maybe an update video to reflect newer changes...

[@alancabezaparada5175]

Hello bro something that serves to turn on and open car?

[@bitcoinsss]

3:46 : when adding the code to the Arduino IDE window I get this error message, not sure how to proceed from here, Can somebody point me in the right direction?

[@masonwalters99]

It’s nice putting a face to the name

[@JustCallMeKoko]

Join the discord and you can put toes to the name too

[@alexandretodorovic5950]

Hi ! i have a probleme, when i plug my DEVBOARD from flipper, it show me on the Arduino, 2 ports. The COM5 and the COM6. Is my devboard not programme to work like yours ? Can i still install the Marauder32 ?

[@darkphenom5151]

use a different USB-C cable... not all cables are the same and thats what i did to mine

[@atruerock8020]

when i paste the code after install 2.0.0-rc1 and then his upload. it says: exec: "cmd": executable file not found in %PATH% Compilation error: exec: "cmd": executable file not found in %PATH%

[@user-sr5un9jq1u]

compilation error redefinition of void set up what does this mean and why do i keep getting this error message from arduino?

[@gregperuti9775]

Can you install the marauder firmware onto the dev board via Android?

[@N0B0DY_SP3C14L]

Fuck yeah, awesome, bruv!

[@isaccgarcia1141]

Little late but can I do all this on my MacBook? I’m assuming I can but I seen you were running windows

[@Chief_Linguine]

Dude this opening made me laugh so hard.

[@kingmaverick8154]

whenever i download the firmware, the marauderota doesnt appear, any ideal why?