Flipper Zero Wifi Dev Board Tutorial: Marauder Firmware Update

PLEASE NOTE: THIS IS ONLY FOR EDUCATIONAL PURPOSES MODERNBROADCAST DOES NOT CONDONE OR SUPPORT ANY ILLEGAL ACTIVITY PLEASE USE AT YOUR OWN RISK
Welcome to ModernBroadcast.
In this quick introductory guide and tutorial, I'm going to show you how to add Wi-Fi capabilities to your Flipper Zero device using a $35 development board.
If you're not familiar with the Flipper Zero, it's an all-in-one Tamagotchi-inspired hacking tool that's packed with features like Infrared, GPIO pins, RFID, NFC, IButton, Sub-GHZ, a Micro SD card slot, and even a cute dolphin pet. It's like a Swiss Army knife for hackers and tinkerers.
But if you want to take your Flipper Zero to the next level, you can add Wi-Fi connectivity using the GPIO pins on top of the device and a special development board. This will allow you to connect to wireless networks, send and receive data over the internet, and even control other devices remotely.
In this video, I'll show you how to set up the Wi-Fi development board to use Murader Firmware and connect it to your Flipper Zero device. I'll walk you through the steps and provide tips and tricks along the way, so you can get the most out of your Flipper Zero and unleash your inner hacker.
So if you're ready to take your Flipper Zero to the next level with Wi-Fi connectivity, be sure to watch this video and follow along with the tutorial. And if you find this video helpful, don't forget to like, comment, and subscribe for more content like this.
Thanks for watching, and happy hacking!
Flipper Zero Unboxing Video Link: • Tamagotchi Hacking Too...
[Flipper Links]
Flipper Zero: flipperzero.one/
qFlipper: flipperzero.one/update
Flipper Zero Manual: docs.flipperzero.one/
Awesome Flipper: github.com/Gioman101/awesome-...
Flipper Zero Discord: flipperzero.one/discord
Marauder Firmware: github.com/UberGuidoZ/Flipper...
*The file was moved to the root of that GitHub. They keep moving it around so I can’t get a consistent link.
[wifi board case]
www.thingiverse.com/thing:579...
[ModernBroadcast Links]
modernbroadcast.carrd.co/
Become a member today!
/ @modernbroadcast
#FlipperZero #Dolphin #Educational #Hacking #DeviceReview #FlipperZeroUnboxing #FlipperZeroConsoleReview #Flipperdevices #MultiTool #ModernBroadcast #ethicalhacking #Flipperzeroreview #Flipperzerounboxing

[@ModernBroadcast]

The file was moved to the root of that GitHub. They keep moving it around so I can’t get a consistent link.

[@lordpiopio409]

where can i find it?

[@762kilo]

Where is the new link?

[@Monster_Rancher]

He changed the version but did not update the link to it, copy the link to the file and change 2.3 to 2.4 and it should download.

[@urdadair6619]

@@Monster_Rancher i love u

[@GuidoZ]

It should have not moved around - always under the Wifi Devboard. I do change the ZIP link but the ReadMe should remain. =) Thanks for the shoutout.

[@alusito8633]

I wasted several hours listening to "great techy savants" and then I finally found your video where in a no nonsense approach YOU EXPLAIN the process BRILLIANTLY! You are a very INTELLIGENT PERSON!! Thank you very much!

[@ModernBroadcast]

Haha thank you for the kind words and I’m glad the video was useful. Although I’m sure there are many who would disagree lol

[@Aparsanlal]

This is currently the most user friendly video out there for flashing the dev board with the marauder firmware, I would like to see more flipper tutorials from this channel.

[@ModernBroadcast]

Thanks for the kind words! Have a great week!

[@TrailWolf83]

This a very good video with details which is hard to find! Thank you for putting this together and for breaking it down for those of us who are unsure

[@ModernBroadcast]

Thanks Daniel glad you enjoyed the video! Have a great week!

[@TylerTechUTube]

Smooth jazz was a soild choice for background music, kudos. Thanks for the tutorial!

[@ModernBroadcast]

Thank you! I never know if to keep the music or stop the music. The audience is very divided on the matter.

[@Itz_Skye.]

I can not express my gratitude. Thank you so much for this video. I have been looking around trying to find how to flash the right firmware because my board didnt respond at all. Thanks so much, I hope this video will be useful to other people such as me.

[@deroace]

true

[@phatesdesign3411]

Bingo! This guy right here. I too am grateful for this video, You explain things perfectly without plugging a bunch of merch or throwing a bunch of ridiculous emojis on the screen. Simple and to the point, Thank you so much man!

[@cardboarddignity]

Somehow after watching this video, I knew how to flash my WiFi board, as well as got rid of my anxiety and work-related stress, treated my headaches and fixed my childhood traumas 😂

[@ModernBroadcast]

Wow! Lol thank you for the kind words.

[@PBRichfield]

Thats what brought me here too

[@lexuscrow1932]

IF YOUR DEVBOARD FAILS TO FLASH - Press and hold both the reset and boot together, and then plug the device, wait 1-3 seconds, and then let go of RESET FIRST and them let go of BOOT. I kept having connection issues, flashing wasn’t working because it could not connect “A Fatal error occurred: Failed to connect to ESP32-S2 No serial data received”

[@humbertocastro151]

i love you dude, i spent an hour looking for a solution

[@ZZOV333]

thank god bro i spent days looking

[@lexuscrow1932]

@@humbertocastro151 Glad I could help 👍

[@lexuscrow1932]

@@ZZOV333 I spent days too. Felt like people here might struggle too

[@russellrozensky6031]

Thank you. Looks like your comment saved me a few days of work

[@asipalacios8701]

just a quick note to whoever followed along and it didnt work, you need to click reset on the mother board after connecting your flipper

[@michaelzborovan4362]

Yea man great vid, most other F0 vids assume everyone already either done this stuff on other devices or somehow knows the terminology and basic functions. A lot of us are using F0 as a learning device(for better or worse). And I didn’t have to rewind this video once like kother vids I gotta rewind parts like 5,6,7 times to catch all the info being machinegunned at me all at once. Hope to see more soon.

[@ModernBroadcast]

I’m glad it was helpful, I want to make more but running low on Flipper Zero ideas that I understand or within YT TOS

[@michaelzborovan4362]

More than helpful... I used your video to flash my wifi board cause sasquatch talks to damn fast and like he's explaining the basics to other hackers,lolol... your vids are super easy to follow and make sense to the people who don't have any sense yet...lol

[@michaelzborovan4362]

But I got marauder working but evil portal keeps saying it can't find the ap.config.txt file and I can see it in qflipper so idk, gotta figure that out. Evil portal was the one I really wanted too.

[@ModernBroadcast]

@@michaelzborovan4362 others may have solved this but in my experience for the WiFi board you must choose. Evil Portal or Marauder.

[@michaelzborovan4362]

Yea I'm pretty sure that's exactly one of the problems... evil portal is literally listed in marauder under wardrive and above targeted deauth... how??? Lol Any suggestions from anyone???

[@OriginalDecurse]

this video is great, i love the music btw over all just a super solid video thank you

[@ModernBroadcast]

Thanks Glenn! I hope you have a great week!

[@Global_News_UK]

This is the best step by step guide Thanks so much Appreciate it Keep it up

[@ModernBroadcast]

Thank you for the kind words, have a great week!

[@Global_News_UK]

​@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

[@Global_News_UK]

​@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

[@Global_News_UK]

​@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

[@Global_News_UK]

​@Modern Broadcast i have tried to install it again but I get error messages And it doesn't work, Do you have any advice for me

[@gtheentreprenerd7207]

Wal-Lahhhh 🙌😇🙌 It worked and got it installed After a couple hiccups- ig I just didn't hold down the button long enough 🙃 Thank You!

[@ModernBroadcast]

I'm glad you got it to work! Play responsibly my friend :D

[@nancytopete6474]

Great info! also really like the music.

[@ModernBroadcast]

Awesome, thank you! Have a great week!

[@clothstrangler]

Thank you so much for the clear and precise video

[@ModernBroadcast]

Thanks! Glad it was of use! Have a great week!

[@golephish]

thank you tv head. I learned a lot .

[@ModernBroadcast]

Happy to help.

[@fray_way6425]

best tutorial yet ty sm homie

[@ModernBroadcast]

Haha thanks! Have a great week!

[@Omikoshi78]

I like your opsec to hide your fingerprints with the gloves :)

[@ModernBroadcast]

Lol ya got me

[@ih4t3youall]

Hey thanks! , and you put all the links! really appreciate that!

[@ModernBroadcast]

I strongly suggest you check my newest video as it is WAY easier now

[@rocketsfall]

Possibly stupid question, but is this supposed to work with the default official Flipper firmware or would this require Awesome Flipper or Flipper Unleashed to use? I've flashed the board but those options aren't under GPIO, and I'm wondering if that's why it's not working or if I've messed up something else maybe.

[@ModernBroadcast]

Not a stupid question at all! So it has limited functionality with the default firmware. If you want the most outta your board I strongly suggest upgrading the firmware on both the board and flipper! Happy hacking!

[@rocketsfall]

@@ModernBroadcast 🤔🤔🤔

[@TheGeekiestGuy]

Right on. I just got my board in. It's always good to get a tutorial before you accidentally let the magic blue smoke out. I dig the background music, btw. Good stuff. 🤙🏽

[@ModernBroadcast]

Thank you for the kind words. A lot of people dislike the music unfortunately.

[@colbybryant8418]

@@ModernBroadcast do you have to keep it plugged in whenever you want to use it or only when you download it and get it working

[@ModernBroadcast]

@@colbybryant8418 only for flashing the firmware

[@pigfloydbbq]

The Mr. Rodgers of Flipper Zero 🤘😎🤘

[@ModernBroadcast]

Won’t you be my neighbor?

[@pigfloydbbq]

@@ModernBroadcast awesome dude.. Enjoying it.

[@AlexMMayhew]

Love it! Ordered my flipper with wifi board a couple days ago... One thing.. if you 3D printed the case... Why not make the case black like your flipper... And I didn't know they made them black!

[@ModernBroadcast]

Nice! I did 3d print the case but all I had was white PLA. I have a white flipper also, but I don't use the wifi board that much. The only way to get a black Flipper was by backing the project on Kickstarter. Its a real neat device :D

[@PanicAcid]

Sometimes for quick and dirty prints you've just got to use the roll that's already open / already on the printer.

[@victortorres1585]

Solid video it worked to the t up you have my subscription

[@ModernBroadcast]

Thank you kindly for your subscription

[@sideswipe147]

Good to know it does NOTHING out of the box. Having looked into it a bit I am glad to see that the flipper is really a good tool that is mostly useless to people without a fairly larger level of knowledge about computers than most people possess. Seems like a great tool but only if you know enough to get it working in a powerful way. Which is great. Many people may buy them but most will not know how to use it so it will sit on a shelf collecting dust.

[@Canelaw-ns6hx]

yeah it's important that people with these tools have the knowledge and understanding necessary before they ever actually use it. like uncle ben said.

[@Sophistry0001]

It's an opportunity to learn tho at the same time if someone has the interest. It seems like a RF/digital multi tool

[@sideswipe147]

@@Sophistry0001 but honestly if you know what you are doing you really don't need one

[@Sophistry0001]

@@sideswipe147 "need" is a funny word. Nobody "needs" one. We need food, water, shelter, and companionship. I don't know what I'm doing, but I want one so I can goof around with it and learn. And the price point is cheap enough that it moves the bar for entry fairly low.

[@alc202]

thank you, this was very helpful

[@ModernBroadcast]

Glad it was helpful!

[@user-uo6jz9ks2x]

Bro, you are my hero🤩

[@ModernBroadcast]

Thanks for the kind words! Have a great week!

[@cash9551]

THANK YOU SO MUCH I thought I wasted my money

[@ModernBroadcast]

Glad the video was able to help :D

[@zsoltibitter8761]

Can the flipper with this dev board do packet injection? I am a bit confused but i am starting to realize that the answer is not.

[@KooLaidStudios]

Thanks bro I been wondering how to use it lol

[@ModernBroadcast]

“OH YEAH!” (Sorry I had too when I saw your awesome name) I also often wonder how to use this little device lol. Glad the video helped have a great week!

[@alloy520]

Love the Jazz.

[@ModernBroadcast]

See that’s what I’m talking about. Unfortunately a lot of people don’t like the music so there’s no more music in my current videos

[@user-fv8cf9pi1x]

I just barely got the Dev board, but I have a PC and when I plug it in, it doesn't appear on the PC. Am I doing something wrong?

[@user-yk2ko4oo9r]

DEVBOARD FAILS TO FLASH after adding the murader. Did the whole "hold reset and reboot at the same time, released the reset button then the boot button after it being connected and nothing. - Also flasher marauder has script 1-5 not 1-4. Still pressed 1 + enter and now when I plug in dev board the red light no longer appears and when I go into GPIO all I see is: USB- UART Bridge, GPIO Manual Control, and 5V on GPIO. Care to help? Thanks!

[@lexuscrow1932]

I can't help you. But I suggest trying to ask GPT 4 and even get it to do research for you online on your hardware and dev board so that it understands what it's working with

[@deontawilliams3131]

I did everyrthing and it went smooth but my flipper isnt picking up any networks with the devboard plugged in, any suggestions?

[@ModernBroadcast]

Try resetting the flipper if still not working try reflashing

[@antoinejackson4311]

I went through the flashing process and saw everything on the video. But when I connect to my flipper and go to GPIO its a different screen. Its asking for USB-UART Bridge / GPIO Manual Control / 5V on GPIO (on/off). What am I missing?

[@SulfuricDrop3]

does the same for me i have no idea why

[@ModernBroadcast]

You need to go to “apps” first then GPIO

[@XxMissingDataxX]

This is a damn good video

[@ModernBroadcast]

And this is a damn good comment :) in all seriousness though, thank you! Have a great week!

[@mattmunhall8372]

I have flashed my dev board with the application how ever when I go and plug the board into my Flipper the Marauder app does not show up any where. I am currently running 0.94.1 on my Flipper. Thoughts on why it wont load up?

[@AceXSR]

you need to install the application for marauder. Id recommend just downloading the momentum firmware as a whole because they have it included. There should be tutorials to do this but the process is pretty straightforward. Hope this helps

[@kapone2k]

Why do I end up with empty Pcap files ? .. Everyone seems to know but no one wants to tell.. or no one knows but say that they know how to solve it.

[@sarahhornbuckle9398]

How did you 3d print a case? I've thought about getting a cnc machine. Can you tell me what a 3d print machine can do? Great video thanks

[@ModernBroadcast]

I found this design on Thiniverse a site with tons of 3D designs and models for printing.

[@sltyboi]

3d printer does the opposite of your cnc instead of removing it’s adding

[@avgeekforlife7604]

For anyone with a problem at the part where you plug in and flash it , make sure that your cord can transfer data because some cords only power things

[@atm_tk3]

This is a great tutorial and I just got my flipper but when I plug the dev board into my flipper I cant find the murader on the flipper so I was wondering if you could know the issue

[@ModernBroadcast]

You’ll need the companion app Wifi Marauder on Flipper Stock kzbin.info2xjJQyG5aBE?feature=share

[@raymondpacheco5447]

Hey man just got my flipper and dev board. I updated the board but when I go to GPIO i dont have those options. Im assuming there is some firmware I need to add to my flipper to get that? Sorry if stupid question. New to this.

[@ModernBroadcast]

Hey welcome to the party! No such thing as stupid questions, you’ll want custom firmware for sure. Personally I use Unleashed but people love Xtreme and other ones floating about. Once you have the custom firmware these options should show up for you.

[@speedbird737]

INCORRECT!!! @ 02:01 you have to line up the pins and push gently until the board is flush with the Flipper Zero. Its connected correctly when pins are no longer visible.You have only partially connected it and its prone to falling out they way you show here.

[@ModernBroadcast]

Good morning speedbird. You are correct it was not connected at that moment I was just showing them together in my hand. Thank you for your keen eye and I hope you have a good day

[@SubSniper]

Does the de-auth only work if it's a open network? Can it work on a WEP? I have tried to test my WEP with a DSTIKE deauther but it doesn't seem to penitrate

[@mannyfresh2deff]

Works only wit 2.4ghz not 5 ghz,

[@user-jl7iq3kg9g]

You said the flipper has Marauder on it already before even flashing the wifi dev board? I couldn't find it on before or after flashing the board with this method? Is there a step prior to all of this?

[@ModernBroadcast]

Since I had the unleashed firmware on my flipper it comes with Marauders .fap file pre-installed. You’ll need the “companion app” which is the same .fap file to get the program to work. I talk about it in my YT short

[@bandino1990]

i followed all the steps, when it came time for me to enter 1 there were 6 things that popped of instead of 4. it connected but it not letting me scan for the wifi lists

[@ModernBroadcast]

Typically this is due to a firmware mismatch, but there are like 8 different possibilities why its not working. best advice is to update Flipper Zero, Firmware, Reflash, Try again.

[@SuperRebstar]

I can't seem to dev board to be recognized in windows 10 to use the flash.bat I downloaded the ESP 32 driver which windows won't recognize. Am I missing anything? I held the boot button and still nothing

[@steveng2488]

Did you ever figure it out

[@ineedbobux4521]

ive got a question how can i plug this thing in to flash cuz my cable that came with the flipper doesnt fit

[@ModernBroadcast]

You’ll need a type c to usb a or if your computer also has the small plugs you’ll need type c to type c

[@_nitro]

Nice new sub here!

[@ModernBroadcast]

Thanks Nitros glad to have you here!

[@masonpowell2499]

every time I enter “1” it says “ cannot configured port, something went wrong. Original message: permissionError(13, A device attached to the system is not functional. ‘ , none 31). [9688] failed to execute script ‘esptool’ due to unhandled exception! “.

[@ModernBroadcast]

Hmm this is a first. Did this get resolved or still ongoing?

[@jesseschers9566]

Im now at the step where you open the flash 4:23. But it has a newer version: v2.50 and now 5 options instead of 4. Do I still need to try again with the boot button or do I have to chose one of the 5 options?

[@jesseschers9566]

Okay so it worked. You just need to press 1

[@Ptsd_Boi]

Everything matches up until I go into GPIO, I don’t have the application on the board though it said to downloaded the program

[@ModernBroadcast]

You’ll need the Companion App which is a .fap file. I link it in my short Wifi Marauder on Flipper Stock kzbin.info2xjJQyG5aBE?feature=share

[@ceh2600]

I got 6 options 1. Flash Marauder (no SD mod) to Devboard 2. Flash Marauder (with SD mod) to Devboard 3. Save Flipper Blackmagic WiFi settings 4. Flash Flipper Blackmagic 5. Download USB UART Drivers (Silicon Labs). 6. Update Marauder BIN file (v0.13.6 included) Not sure if I should go for 1 or 2 ?

[@ModernBroadcast]

Does your board have a micro sd card slot? If yes 2 if not then you want 1

[@onebutnottwo9980]

im having a little issue, as i did the option number 1 is gave off a fatal error telling no No serial data received

[@ModernBroadcast]

Others that were having this issue was because they did not hold the button long enough when plugging in the computer.

[@EliasGambit]

the flash thing installs just fine but the wifi devboard doesnt show up in the GPIO folder

[@ModernBroadcast]

You’ll need the companion app Wifi Marauder on Flipper Stock kzbin.info2xjJQyG5aBE?feature=share

[@wedoit6035]

i did the exact thing but it wont show up on my gpio, installed fine whats missing?download shows done correctly

[@ModernBroadcast]

Most likely you’re missing the .fap file

[@numzy1365]

Do i need first to update the original firmware from the docs site of the flipper zero, or it doesn't matter and i can directly start flashing it from the murader ( i'm talking about wifi dev board directly out of the box, can i directly flash it with murader firmware or i need first to update the original firmware from the flipper zero docs)...

[@ModernBroadcast]

No you do not need to update with the original firmware first.

[@numzy1365]

@@ModernBroadcast Thank you for the fast response, be safe

[@ModernBroadcast]

@@numzy1365 absolutely have a great weekend

[@tempestkupo5151]

Followed step by step and when i plug in and open Wifi Marauder it says "Error, Load Failed" and "Update Firmware to use with this Application"

[@ModernBroadcast]

I just made a new video this morning of a simpler method

[@Quantum-guy]

i did what you said but now my wifi board doesnt work anymore and just lights up in rainbow when i press the reset button and when i try to start a app that needs the board my flipper crashes Pleas help

[@ModernBroadcast]

Sounds like it didn’t flash properly? I would go through each step again carefully and attempt to re-flash the board.

[@adventurelogs]

Mac instructions, PLEASE. IDK how to get the initial Marauder screen. I'm generally pretty tech saavy (linux/mac/windows/R-Pi) but this is making me feel pretty stoopid lol

[@elliott972]

hmm. mine doesnt scan anything, justt says to hit back button to stop scan

[@Drago_Esports]

someone help it just says "the log is empty! :("

[@mrmurr278]

so you can use this without having the flipper plugged into an android/PC?

[@ModernBroadcast]

I've seen people use it that way. However that's a bit above my skill level so I wouldn't know really how to help navigate that.

[@Luke-fc4px]

I've installed multiple drivers for the dev board, I hold the power on button before connecting, tried multiple cords and USB ports, still can't get it to be recognized on my windows 10 desktop... any ideas? I'm going crazy. Maybe it's broken?

[@ModernBroadcast]

It’s rare but not outta the question for a faulty board. What I’d be more concerned with now is “installed multiple drivers” it’s possible they could be conflicting with one another or causing other problems.

[@MentalMarathon_]

That gui eating popcorn 😂😂😂

[@MiloTheducka]

PLEASE HELP when i do ap scan i get a blank screen what do i do?

[@Xmytho]

Hey man, great tutorial. I did everything right and everything worked, however when i select the deauth attack on my wifi it doesnt work for some reason, i have the xtreme firmware on my flipper. Can that be the problem?

[@ModernBroadcast]

I haven’t really played with Xtreme FW as I primarily just keep mine with unleashed. I sometimes have issues with it not working or sometimes when I go into the Wi-Fi menu it’ll reboot my flipper but then it’ll work the next time. Sorry I can’t be of more help

[@aaronnettles5500]

Why does it say “1 selected, 0 unselected >” when I select and save the wifi from the list? It doesn’t save and all I can do is go back

[@ModernBroadcast]

That is bizarre. Does anyone have an answer to this question?

[@user-qx9qe3nr7y]

Quick question. If trying to download the zip file results in a new github page with a 404 error code what should I do?

[@ModernBroadcast]

Go back a page and it’ll be listed as a zip file there

[@rpplayz135]

hello, i have a dev board that doesnt have plug in just sd card? can anyone help do i have to flash the sd card? thanks

[@ModernBroadcast]

I've heard yes. and with a SD card slot I hear you can also dual boot however I don't know how.

[@Kenji-wi4ib]

When I get to GPIO, the Wi-Fi Marauder option does not show up. I did the step at 4:30, and it worked. Do you know what is wrong?

[@ModernBroadcast]

You’ll need the companion .fap file. Here’s a short I did on the matter. Wifi Marauder on Flipper Stock kzbin.info2xjJQyG5aBE?feature=share

[@ScreenY]

dont connect and keep failing Failed to connect to ESP32-S2: No serial data received.

[@ModernBroadcast]

I’m not sure why. It appears half the viewers get it to work following the video and half don’t. I’ve tried flashing mine again and it works. Hopefully someone in the comments section has found a cure.

[@fadevill]

Would I also have to have the same software in my flipper or just the wi-Fi board?

[@ModernBroadcast]

The firmware would get loaded into the Wi-Fi board. You’ll then need the .fap file for it to work on the Flipper Zero

[@xavierxavier1232]

Hey, great video! I followed your steps was working great. But now it says it no SD card when there is. Any ideas what the issue might be?

[@ModernBroadcast]

No SD card in the Flipper or do you have one of the wifi boards with a micro sd card?

[@adamr4503]

i followed all steps but when i go to applications on my flipper and then GPIO, i don't have the option of ESP32 Wifi Marauder. All i have is AVR Flasher, DAP Link, Signal Generator and SPI Mem Manager

[@ModernBroadcast]

These applications need to be added to the flipper or if you’re using unleashed it come preinstalled

[@Vyasvyas8]

@@ModernBroadcast can you please share a link how to add ?

[@ModernBroadcast]

@@Vyasvyas8 Yes I think I'll make a video on this very aspect as I've gotten a few questions on it. Or maybe a short on the topic as idk if it's enough for a full video.

[@MartianMoon]

@@ModernBroadcast +1, could really use help with that!

[@ModernBroadcast]

@@MartianMoon will do. I’ll make that this Sunday video.

[@LinkedWish]

Great video! Could you add a link to the STL file for the case you printed for the wifi board? I'd like to print one as well for mine.

[@ModernBroadcast]

Hey thanks! Here’s the STL link! Have a great week! www.thingiverse.com/thing:5798965

[@LinkedWish]

@@ModernBroadcast Thanks, you too!

[@michachojnowski1313]

What should i do if i still dont see the Mariuder in gpio app=plications?

[@ModernBroadcast]

You’ll need the companion .fap file I linked it in my short on this topic

[@Niergends]

I don't know why but everything works but as soon as I open gpio there is nothing there. it's all empty

[@ModernBroadcast]

It sounds like your on stock firmware. I’d flash your Flippers firmware to something else first but if not then you need the Companion App. I did a short about it.

[@killtime351]

Thanks for the D claws at the sand casino

[@ModernBroadcast]

I’ve read this comment like every other day since it came in, I still have no clue what it means, but if the video helped then you’re welcome :)

[@killtime351]

@@ModernBroadcast UBER 1337 BAMF gg

[@codycabral8915]

i did everything correctly but when i put my dev board into the flipper none of the new options were there do u think u know why?

[@ModernBroadcast]

Sounds like you need the Murader Companion .fap file. I talk about it briefly in my YT Short kzbin.info2xjJQyG5aBE?feature=share

[@menace920]

i did all the steps but when i go to the gpio the maruder option is not there i followed all the steps correctly if anyone knows why i am having this problom please let me know

[@ModernBroadcast]

This is most likely a firmware issue. You'll need the Companion Fap file. I link it in my Short on the subject. Best of luck!

[@borenus4885]

I do all the steps you do, but when I go into my flipper, i dont have all of those GPIO options??

[@SQUeeK1984]

Might have to get the unleashed firmware

[@pedrosanchezdeljuarez4100]

Have you fixed it?

[@ModernBroadcast]

As @SQUeeK1984 has stated it might because I have the Unleashed Firmware. If you're running Stock you'll have to find the .fap files for each on and be sure they work on Stock firmware.

[@SQUeeK1984]

yes sir @@ModernBroadcast ! it's definitely the firmware he needs to install.

[@mikecianfrocco1250]

Will this work with xtreme firmware

[@mikaelkyster1]

I did all of this but the Marauder is still not showing up on my Flipper. Anyone has any idea why this is not working?

[@ModernBroadcast]

You most likely need the “Companion App” which is the .fap file. I made a short about where to get that file.

[@15youngblack]

I'm getting an error saying 'Preload failed API version mismatch.'

[@BlackneeedWasHere]

Update the firmware of the flipper zero dev board

[@user-dc7pr3ec4g]

My WiFi is no longer lit and there is a problem with the firmware. May I know how to reset it? Thank you

[@ModernBroadcast]

If you encounter an issue with firmware, simply re-flash and try again

[@yamman8822]

Is there a way to do this on MacBook Im clueless and admit I’m not a computer pro any help would be appreciated thank you for all the videos

[@ModernBroadcast]

Hey Yam! at 03:18 just under "Quick and easy flasher" it says looking for Linux/OS X version? then a link. I don't have a mac to test this on but it appears there is some sort of work around.

[@bryangallardo5048]

I followed every step with success. Then upon the “Scan ap” step, it failed to scan anything. I’m using unleashed firmware, and the same dev board you are using.

[@ModernBroadcast]

Hmm it’s a bit finicky for sure, sorry for the delay I’ve been sick. Has the issue resolved or still not scanning?

[@bryangallardo5048]

@@ModernBroadcast you’re fine, I appreciate your reply. No it hasn’t, I even redownloaded the firmware and redid the steps. This might be a dumb question but is there a way to redo the dev board steps?

[@samerhayek253]

I get to 5:05 and thats when trouble starts. I don't see any of the choices you have. I even kept the board plugged in when I connected it t the flipper. Any suggestions? I appreciate your work.

[@ModernBroadcast]

If you don’t have the Wi-Fi murader fap file showing check out my KZbin short where I show where to get the Companion App

[@samerhayek253]

@@ModernBroadcast thanks I think I got it.

[@ModernBroadcast]

@@samerhayek253 that’s awesome! Gratz on getting it!

[@NilsJohannesson]

Thanks for the video! Hoping you can help me out as I am trying to flash marauder onto my new wifi dev board but the batch script just returns " A fatal error occurred: Failed to connect to ESP32-S2: No serial data received." I have done the steps you described in the video exactly. Do you know why I might be getting this? Very new to working with hardware so this is as much help as google at the moment :)

[@ModernBroadcast]

I’m not sure what this error is as some others were having it too and I’ve tried to replicate myself with no success. I heard one person say you’ll need to install python to your pc then it’ll work, I’ve heard some people just try again then it worked, etc. I’m sorry wish I could be of more help!

[@NilsJohannesson]

@@ModernBroadcast Still not sure why it didn't work, but after looking at talking sasquatch video it worked, basically by holding boot button first, then plugging in usb-c and then releasing boot button. Installing worked fine after that!

[@wyatt5984]

@@NilsJohannesson just got mine today and can confirm that this works for some reason after experiencing the same error you mentioned!

[@sharamsalih7651]

Your the best thanks

[@ModernBroadcast]

No, you are! Have a great week!

[@ponyecuatoriano6210]

Friend, I already tried that procedure but it comes up empty, the board

[@ModernBroadcast]

Try this: Wifi Marauder on Flipper Stock kzbin.info2xjJQyG5aBE?feature=share

[@RichardsWorld]

it doesn't need an antenna?

[@ModernBroadcast]

It doesn’t need one but there are other boards with antennas and the range is much better.

[@irgendsoeinfisch668]

when i plug the board in via gpio and go in the apps section there arent any apps from the devboard. did i do anything wrong? and if yes what?

[@ModernBroadcast]

Sounds like you need the companion Fap file found in my short video for this

[@irgendsoeinfisch668]

@@ModernBroadcast okay thanks for helping out

[@LuxGamer16]

dont know if anyone pointed that out ( looked in the comments, but didnt see it) but you misspelled marauder in the title. Unless that was on purpose ofcourse. Nice video nontheless!

[@ModernBroadcast]

LMAO no, no one has pointed this out and its gone SO LONG without notice xD Thank you!

[@bojjeds3921]

i did all tutorials my flipper zero CAN NOT DETECT MY DEV BOARD WHEN PLUGGED IN. im going crazy ive been trying every guide for 2houres & hhalf now ;...........

[@ModernBroadcast]

You’re holding the boot button before plugging in and continuing for 3 seconds?

[@siggi1821]

hey i was wondering for me its with sd card and no sd card wich one should i use ?

[@ModernBroadcast]

Mine doesn’t have an SD card slot but if yours does you can dual boot example: Marauder and Evil Portal.

[@siggi1821]

@ModernBroadcast hey I got it working but deauth does not work

[@heavymalikcaos1329]

Help the flasher says esp. Exe missing

[@MrXtahsee]

what does it mean when it states via flash.bat , esptool.exe is missing ?

[@ModernBroadcast]

Another commenter mentioned move it to your C-drive then try again

[@Keitdhd]

Is it ok if you buy it on Amazon? And do you need the wifi dev bored I’m getting one but the dev bored is coming in a week or more

[@ModernBroadcast]

I’m not sure the question here. Is it okay to buy the dev board on Amazon? If that’s what you’re asking yeah you should be fine it’ll come in a box with some padding and should be good to go.

[@Keitdhd]

@@ModernBroadcast lol thank you I was talking to some one while typing this so my fault for not making clear sense and great video

[@ModernBroadcast]

@@Keitdhd lol I do the same thing at times. Glad you liked the video!

[@filipvlastnik2716]

i plugged dev board into flipper and it shows me nothing in gpio..

[@ModernBroadcast]

update everything Flipper, Firmware, Reflash, retry.