7 Mistakes Every Producer Makes & How to Fix Them | FL Studio Tutorial

[@theMixElite]

Who smashed the *Like Button* for the Algorithm?

[@rebirth4119]

Just did man :)

[@parthgusain3698]

Me bro ❤️

[@sparkleswrld]

😅I did

[@darkfullblacknightrecords]

☝

[@prodbyadrv]

Of course man

[@unickx5188]

Most important thing while producing in FL : press Ctrl+s every second.

[@FlowSwitchMusic]

facts.

[@helpniggv]

🤣🤣

[@dropx5865]

yeah 🤣i do that since that accident happend

[@djblazeofficial]

Agree 😂😂😂😂

[@ProvatTonoy]

Damn..true😂😂

[@Art_is_mad]

I definetely used to over compress my tracks while mastering. I liked it because it was loud but when i listened to it on my earbuds, i always wondered why is it so hard to write lyrics to my own beats, it seemed like there's just no space for my vocals because everything was just too in your face and they were super overwhelming, felt low-key tired after listening to each and every single beat that i made. But when i finally figured out how extremely aggressive the compression was in my mastering chain, and decreased it, i swear that feeling of relief, it just felt amazing.

[@AlanJojy]

limiter and soft clipper difference was big noticeable

[@theMixElite]

True! It's a huuuuuge difference, I would consider the video example as not the most noticeable, but if you try it yourself you will definitely hear it even better :)

[@cedd361]

Yeah it's gives it alot of body. How I understand saturation is that it adds harmonics (predominantly the second harmonic) which adds some flesh to the transients.😅

[@empyric949]

So instead of a limiter on the matter we soft clip the master IF we want more power and loudness?

[@migats2160]

There are professionals using a limiter, not the fruity limiter actually, and their tracks also sounding good.

[@Betadesk]

@@migats2160 yes limiters are fine but the fruity limiter is trash lol especially if you dont know what you're doing

[@alyen589]

Never give your rendered patterns generic names like "pattern 1" or "drums". Reason being, if you need to move your FL files to another computer and you have multiple audio files called "pattern 1", you run the risk of them being deleted or overwritten.... plus when you go to open a project that uses such files, FL will load the first "pattern 1" audio clip it finds.

[@Harsha18599]

Then what should we give?

[@prodbydramatic]

@@Harsha18599 what do you call em "project name/drums"?

[@SLIC3R2]

Best way to avoid any of this, is to save projects under zip folders “zipped loop package” because it will literally take all the audio clips you have patterns etc and save it alongside your project file, that way you will never lose your drums or have your problem

[@houx7044]

this man is the king of pluggin his courses, but still giving away free tips

[@josemariibanez181]

One thing I do like to note though is that many professionals do actually go out of key but the certain out-of-scale notes they use sound like they're in key. As long as you do it correctly, you're fine.

[@DreamGaming12]

I think they’re called diminished?

[@josemariibanez181]

@@DreamGaming12 It doesnt have to be necessarily diminished. As I said, if done correctly it will sound musically pleasing.

[@attarilangetarwprestaka1937]

@@DreamGaming12 modal interchange also works

[@DreamGaming12]

@@attarilangetarwprestaka1937 wait yeah broooo I’ve been loooking for the name for that for so long thaks

[@attarilangetarwprestaka1937]

@@DreamGaming12 No worries bro, kzbin.info/www/bejne/Z5W1cmVumMmna8U this is probably the best video explanation i remembered watching, really opened my eyes (and ears lol).

[@jamesbestaaron5628]

not using templates is killing your gains -Max Cavaliere

[@theMixElite]

AHAHA oh man, made my day. I love Jeff.

[@DidoInFlames]

He mentioned big mistakes but i have to add one gamechanger for my mixes to that list: Phase correlation !!! if your sounds are out of phase when you sums to Mono this will destroy your mix in mono or even on translation to other sound systems . So to check the phase on every sound i add to my project is my biggest Secret now also check in groups and the whole mix. if sounds dissapearing or sounds thin and weak that's why - the Phase! The more of a stereo widening you have the more Phase issues . Important never use Phase Altering Delayer or Stereo enchancer that will destroy your mix in mono completely. You will add gently stereo widdening but you have to know when to stop . too wide is a problem! it's not a simple task but it is a Huge revelation for me . Making music for about 13 years and not knowing that was a huge mistake.

[@CPMusic254]

For the limiter and soft clipper that was me you were describing. Thanks, learning everyday is cool.

[@nightbreezemusic3509]

A mistake, that I used to do alot: switching betweeen mixing and composing. Since I diciplined myself to do it step by step, I became much more productive and focussed.

[@IamChaitanyaDesai]

There are lots of mistakes but My Biggest misket is not focusing on my whole idea at first but fixing the small stuff at beginning (and i am trying to avoid that)

[@IamChaitanyaDesai]

@Ruben Feldman ok bro 🙌

[@DidoInFlames]

yes i'm guilty of that too coz i'm perfectionist and then i'm bored and stuck coz too much time on sound tweaking

[@shoulderemotional1477]

It hasnt even started but I know it's gonna be siiiick !! 🤘

[@bringerofdoom3750]

The statement at 3:30 was brilliant.

[@gyanivyakti8601]

Max is a madman frfr... Dude's crazy good as a mentor I tell u...I bought that Hard trap course of his n not being a beginner I did know a lot of the stuff but then again there was so much I didn't know that I learnt from him..mad respect bro ❤️

[@gerco-wagenaar]

Your channel has helped me so much. I'd love to support you more! Thank you for all the tips and tutorials, you're a true legend.

[@eliabressan6037]

One problem can be mix in composing phase. You lose the concentration on composing

[@beyTu]

you are a very qualified person Max

[@SabioSigSauerOfficial]

Dude, you make me wanna learn to produce my own beats!!!

[@FridayGoodish]

Do it!

[@SabioSigSauerOfficial]

@@FridayGoodish yeah man, for real! I'm still learning with a hunger for this shit! 🔥🔥🔥

[@FridayGoodish]

@@SabioSigSauerOfficial I started producing about 3-4 years ago, it's addicting if you really apply yourself. Imma check out your tunes

[@SabioSigSauerOfficial]

@@FridayGoodish I started rapping in Spanish because I got tired of listening to other Latino Rappers lacking in the metaphors, the similes, the homophones, the punchlines, etc. But, my true passion is the beats, honestly. So, we'll see where this takes me. I honestly, couldn't care less for the money or the fame. I just love the art and the music.

[@FridayGoodish]

@@SabioSigSauerOfficial amen brother. Do it for you, not anyone else. The rest will come

[@debdootmanna]

That Reverb Trick...... 😍😍😍😍😍

[@parthgusain3698]

Hi i am max...from fl studio teeeeeeeeeeeeeeeeeeps........ waiting for this line ❤️❤️

[@h.n.r_funi3324]

it would be amazing if you made a video dedicated to working with izotope ozone, i feel like it has way more potential than just how most producers use it for the final master

[@ufokkenwotm8]

With all the sales Izotope has been having, everyone pretty much has it but just use the automatic mastering thing and call it a day. The eq match, compressor, dynamic eq, maximizer and the vintage mastering tools are really great if people dig into them.

[@utmozt_musics]

Good one 💙

[@Dub-G]

the reverb mistake was one my first mistakes and as a rookie i also admit not fully understanding everything but I learned something from the video thanks homie!

[@trik9355]

I only began to feel confident in my work when i learnt how to EQ properly. knowing what to cut and boost is key Sound selection comes with time. your ears would improve so its not a days job

[@amish5614]

never change fl teep it's sound funny

[@em3world764]

Thank you man, you Open my eyes

[@peakoz]

saturation is compression anyway it effects your sounds.

[@whoizdani]

also, why my master channel is at -6 and then, when i export the files in playlist tracks mode and bounce it to a new project, they clipping above 0 ?

[@GlaniastyD]

3:43 made my day

[@sirdarrel314]

use the soft clipper knob in the limiter get same effect as the soft clipper

[@Madman.3311]

The best channel for musique learning

[@roman_scan]

Just use a limiter and make it a hard clipper by turning att, rel, and sus all the way down

[@Legitify_Music]

Instead on using a Limiter on the Master, I use Maximus

[@gudenemma3429]

THANKS SO MUCH ITS A LIFE SAVER

[@youngkizzi9944]

Amazing tips! 🤯❤

[@dirtyocean3072]

of all of these, there are two I don't utilize and that's the project bones, and the limiter saturation method. but I love this channel keep doing what you're doing. gonna spend the day creating templates for different tempos.

[@whoizdani]

so, what is better. limiter or soft clipper for loud beats?

[@ufokkenwotm8]

Soft clipping and/or saturation for the transients and then limiting for the final part of the chain

[@livebymusic9345]

can you make a tutorial of limiting and compression as well as plugins which will help in it

[@KunalKumar-jt1xl]

It took me 2 years to learn that, you just explained it all in just one video.

[@sipping40s2]

1. Putting limiter on master 2. Not knowing what limiting does 3. Not understanding fundamentals 4. Not learning/understanding music theory 5. Too long reverb delay / no low cut 6. Wrong choice of sound design 7. Not using FL templates

[@tommytomorrow7376]

Pro Level content ✌️🔥🔥🔥🔥

[@TSK612]

how can i do that? 8:26

[@thefiddle2958]

3:47 learn from the mentals? Got it!

[@theMixElite]

Haha fundamentals

[@rashiefbrown9505]

Hey could you make a video explaining the courses you offer, you can even post it on your IG? I don't wanna buy the wrong one.

[@vaibhavpianist4520]

How to save samples in fl studio ?

[@unhoardtrshz]

bruh not saving samples and templates is one of the most important whether ambience or any shit is important lol. it's what helped me make more

[@lordchia1593]

max you are great

[@fijihellemans]

I wish I found this channel earlier! These tutorials are amazing! Thank you soo much for making them!

[@isomatic]

#8 is not creating a project folder for each new project started. This folder is where all the recorded sounds will be stored, among other things.

[@s4f33d7]

Great job

[@ezzeldin41]

They are always great, but we want videos of how to do mastering

[@toxido_style]

Thanks

[@LRXEN]

Decap showed that trick on one of his videos 2:00

[@mhkkarami2435]

Make part 2 please ♥️

[@dyalljohn3973]

Thanks 😊🙏

[@magicaloctave9509]

Fantastic 💐❤️💐

[@walkamongkings]

Every video I learn so much.

[@delaripinkbeats7659]

always the best

[@ezioonam3108]

Lol on that DJ at 2:55 😂

[@numex9569]

nice tips but I think that starting a project from 0 is better because it's possible that the track is too similar to another and I feel more creative when starting from 0. My opinion :)

[@ashrafmohamed1398]

I love your tutorial and your tips

[@BEDO97]

Thx ♥

[@heatz2484]

Best channel Keep working body I will be join not training courses soon

[@dyjjy]

Ich Feier deine videos, hat mir schon so vielen Situationen geholfen Hast du einen discord Server ?

[@oskarbesaraba6720]

Verry nice i love it show more bro ;)

[@Knolox]

most useful video i watched today

[@beaterbeetle1692]

Max if you are in touch with imagine lines, please tell those idiots to keep adding more features. I WANT FL TO BE THE BEST DAW EVER.

[@huzefi]

this is just a fancy ad, useful indeed but still an ad.

[@anuragvermav6008]

Cool 2 helpful videos in a month Please make a video on Best way to manage your sample

[@shivjayvolvloikar]

Can you please tell us how to use a single reverb as a send reverb????

[@dylanmoreland9383]

game changer

[@ahmadmulya_]

can i get a tip for recording high and loud note lyrics/part of song, like do i have to put limiter when recording to prevent distortion clip.. im so confused and dont know what to do

[@ufokkenwotm8]

Just shout into the mic while tweaking it’s own gain knob (either physical or in your OS’s sound settings) to prevent clipping, although some mics have a hardware limitation on how much signal it can receive and automatically clips it. For the recording side, while you can use a limiter with a slight attack and long release, it’s better to use a compressor for that, or better yet, don’t use anything on the recording chain so that you can record the raw audio and then focus on audio repair with stuff like de-clippers, de-essers, vocal levelers (pretty much compressors) etc.

[@ankitmusik1494]

Very much informative

[@lokigaming7937]

Please make video on Slap house tips and tricks.❤️👍🏻

[@prodmarcogoat]

nice sir

[@AlIinDJ]

Love how every mistake we make, you sell us a course But actually I like what u say mate, I'll take your tips

[@idontknow-xf8uk]

I need this!!

[@CraddyMusic]

Do you guys know a fast way to export your samples from a finished track? Going through all the stems and cutting them, or going through all the patterns to export them one by one is pain. 💀

[@feggyo]

you have option in export window - split mixer tracks

[@CraddyMusic]

@@feggyo yea I mean exporting the individual samples from a track. Like the kick and snare samples etc

[@iStefanRo]

@@CraddyMusic yea export zipped package

[@CraddyMusic]

@@iStefanRo Oh Yea I forgot about that, thanks! Always used that for collabs

[@drlostcause4427]

I've disabled the Master effects option in the export track.

[@DJFlam7]

Well the biggest of it I did even now is the "Limiter on Master". Will not do that for sure now 😂 I didn't knew compressor functions that good. So I seriously learnt all the theory from "WICKIENEDIA" and now my compressor are better though 😁

[@m4rtinve]

When i add a new pattern to make a piano sound to my song does the bass and everything Else being piano too... how can I fix this😔

[@omyogatma137]

Love DaDaji

[@fivetwelverec]

max i think its the time to make a sound design course , who agree with me ?

[@VJBeats]

Can i get the tips in Indonesian language ?

[@png.arthur8680]

Guys can someone help me? What is the shortcut to immediatly render and consolidate only the higlited things. I remember it was a lifesaver but after 1 month without producing I forgot what it was. I mean consolidate direcly in the project, not save it in a folder.

[@egplayed]

Ctrl + Alt + C 👍

[@png.arthur8680]

@@egplayed thank you

[@prodbyadrv]

Comment for KZbin algorithm

[@gonzalojesus8998]

el curso esta en español?

[@ZakOnTheBeatProductions]

Thanks sir.

[@prodbyadrv]

0:31 Knowig, it seems that they've done this video with little hurries, I understand it :)

[@myrenmusic1611]

Yay happy😊

[@jojosyoutubeadventure4659]

A sound design course would be interesting. Unless you already have that..

[@soufianeeliyssaouy6857]

wish i knew it before... amazing

[@dalmaximus]

Hmm, I'm just enjoying teaching myself. The best way is discovery

[@rezaway3192]

Tnx bro

[@yohannesdesta9654]

WOw best teacher

[@soymartiinez]

Show me more stuff!

[@hiphopsangeet]

cool tips respact

[@sour412music]

Yep that was happening #1 had to go empty

[@akshanshkushwaha1661]

Show more stuff!!

[@chomii]

Useful tip: keep your autosave on it'll save your project minutes after minutes so you won't have to break a bone when your fl studio crashes....thank me later;)