MID SIDE EQ - What, Why & When? - FL Studio Only Stock Tutorial

[@GorgonDrageil]

I'm mastering my mixing this year

[@PavanMS87]

😂

[@empyric949]

Dude honestly same

[@adventuresofestto1008]

Glad you said this year!! That's a goal and goals take time. Thumbs up on the mindset!

[@jwzko]

Good luck bro 😔😂

[@ryanallen1286]

I’m mixing up my understanding of mastering this year

[@Overxpossed]

This is so fundamental... I figured why my tracks sounded kind of muddy or lacky of punchiness, started to search why; some person told me it wasn't related to the EQ, but to this, which I had found by investigating. So now I'm lacking of mids. I do love doing tranceish sounds, which are usually very wide and stereo, and now I see what I was doing "wrong". I was putting too much stuff in the sides, the kick was only in the mid with a bass and that didn't sound glued.

[@benjaminmontague4484]

That apple banana kiwi example got the point better than other times mix engineers tried to explain it to me. nice one!

[@wayuofficial901]

Max Is My Life Saver In Music Production🤗

[@ericktellez7632]

one thing i would add though for the people reading is that these corrections are being done in Solo mostly to show how midside affects audio, however in your production always try and do processing while the mix is playing so you do changes according to the context of the mix not to make the solo audio sound better, since it might not fit with your mix.

[@Novous]

mid-side is another term for sum-difference which is used in lots of stuff. What's in common, and what's not in common.

[@Spiranic89]

OMG. The difference is very obvious... I have trouble wrapping my mind around this... But I need to input this in my mixes ! THNX! "The producing rabbithole deepens again" When i can spare the money i go for the Course box, I love this so much, im smiling during this tutorial, Challenging my mind is something i always enjoyed haha

[@registersoccer]

I Can't Believe the Quality of your Content. One stop shop. Once I need more I'll definetly check the courses out!

[@kaustik185]

Fl Studio tips: different eq on mids and sides Me, an intellectual: different soundgoodizer presets on mids and sides

[@SALEENS7GTR5]

OTT on left, Soundgoodizer on right, Sausage Fattener in the middle.

[@___-qj2lx]

@@SALEENS7GTR5 the trinity

[@kaustik185]

@@SALEENS7GTR5 I CRIDE

[@yungprospectsa]

MAX , YOU ARE LEGIT. THANK YOU FOR SHARING SO MUCH VALUABLE INFORMATION

[@danic.3760]

Personally I use the Ozone mid-side EQ, it's amazing, but with this video now I have a better understanding of the concept, nice job as always ;)

[@One_of_Many750]

This Really Breaks Down Mid/Side EQ, To A Degree That It’s FAR MORE UNDERSTANDABLE!!! Going To Apply This Using Patcher. Thank You Good Sir!!!

[@eldibeats3041]

your the shit bro...got my mixing game up thanx to you

[@PratikRemixOfficial]

Hey, I Make One Mix And After Some Time When I Opened My Project again, The All effects Are Missing from The Each and Every Mixer Track, What Should I Do! plz Help Bro😑

[@retcontv304]

X2

[@eliezeror813]

Love this thank you.

[@royalbanglamusic7234]

I learned a lot of mixing trick from you channel ....go ahmed good video I am from Bangladesh.

[@malakian44]

I never used Mid-side EQ... And now I am struggling with my 114 channels project... I think, this will change my life :D Thanks!

[@nicolasalexander408]

That was the best explanation of Mid-Side that I have come across and at some point I may well do one of your courses but it's just after Christmas, which reminds me....Happy New Year Mix Elite Peeps! Have a good one! ;D

[@figloalds]

I love this this is sure-fire one of the reasons my tracks weren't going anywhere as much as I tried Also I did not know the Stereo Shaper could output the inverted signal, that's so fucking useful

[@zsombigregor]

Is the low-cut in the sides replacable with making all the low frquencies(like..below 250Hz)mono with a maximus on the master track?

[@ballabsb]

Max, in every video you prove that fl is tha best daw in the market.

[@HandsomeboySisimai-wr4ry]

Yes u are the god of fl wow thiz secrets are of the pros and some of them don't want to reavel them but u are wow thanks mr nervo

[@happysinha]

Thanku so much ♥️☺️

[@thesinghmusic9230]

Brother u r insane 🤩🤩💖💖

[@gilormsplay]

Wow, much to think about.

[@swietyspokoj]

Yo, man, You're doing great great great job! Great job. Great. Thank you.

[@intracy999]

No f way, just today I thought about Mid/Side Eq in Stock FL becaue, I know about it, but I was to lazy to download something, and then your Video is popping up, thats so dope

[@soniromanov]

Was going to subscribe then I remembred I was already subscribed. Endless great content and so well explained.

[@HShorro]

HAVENT USED BUT I WILL BW USING NOW

[@XpiryMusic]

Nice to see you man ❤️

[@cyrusnonde4002]

I’ve never used mid-side eq but you’re so inspiring

[@Nuggifresh]

U are the man max and this was confusing yet very descriptive video. …right lol. Good work

[@ledioshqiopa2401]

Please i have a suggestion. I would love to have a detailed video on how to create hip hop / 808 drums. I mean how to use equalizers on the drums , to have a clean sound, and professional. ✌😊 thank you

[@patrikcerny2844]

THANK MAX YOU ARE TRUE GURU

[@rainy2063]

musician like a artist you like an artist you decide which texture and dye you want to see in your art

[@ALDVIR]

Can you please tell me where to find the song that starts playing at 0:16 ? The piano? PLEASS

[@ranoodixit7371]

Bro plss 1 video on everything about baslines and 808s

[@ebsonmec1807]

FIREEE! 🔥

[@brytonbeats5077]

Thanks Max you have a good way of explaining the content

[@rizzbod]

at 2:34 , i totally felt the ''fruity' part of fruity loops studio

[@ibrahimlugogo3116]

As always very crucial content for producers

[@danielcaputo4494]

im having an issue on my mid side eq'ing and the side eq only seems to work when a reverb plugin is on. even when I have channel rack completely bare, I can't get the side eq to work unless there is a reverb plug in. I have no idea what I am doing help.

[@shakthii9]

same things happening to me idk wtf is happening

[@Destroonthebeat]

Do i cut the all the side on a bass (808)?? Or just the first 300 or so

[@littoprincesebinyane9080]

Haven't used it fam..bit too shabby but hopefully I understand soon

[@sperk01]

great vid bro. i subscribed

[@memeu]

I did it, but in more complex way. Patcher will be much faster. TY

[@BandoLyrix]

Ong....that pluck melody ❣

[@89kbeats]

Loved this. Thank you

[@AlbertJaron]

Does putting low frequencies in mono with plugins like ozone work the same?

[@theMixElite]

Yeah - download my patcher preset pack I've made a free replica of the ozone multiband imager!

[@florianstrobel9065]

But why should I cut the Highs on my Mid Chanel? Think Mid-Side EQ make sense if you want to cut the lows on the sie chanel...

[@maximilianschroeder8757]

Uff, thats Lit thx a lot for everything

[@aBhisharma-yb1er]

U r like ... Have no words man.. hats off 🙏🙏 Thanks a lot man ..

[@jeevanahh]

please make a video on exporting stems in most efficient way, exporting stems on FL is very time consuming

[@OfficialKraz]

First, make sure everything is routed to a mixer track. If you have multiple things routed to the same mixer track, it will be exported on the same stem. Then when exporting, make sure “Split mixer tracks” is selected.

[@jeevanahh]

@@OfficialKraz how to export stems of only selected channels?

[@OfficialKraz]

@@jeevanahh Mute unwanted channels on the mixer.

[@Record_FM]

Thank you for the lesson)

[@TrinCZ]

Thank you so Much MAX!

[@illmedik]

😂😂😂.. I swear everytime I try using stereo shaper to try to understand it and get familiar with it.. in a couple of minutes I just replace it with d stereo enhancer, or a 3rd party stereo imager.. now I know I'm not alone 😅

[@AKSAVAGE646]

when u master with mid side eq, do u change the stereo settings to stereoize it

[@dgg-c8h]

this is gold

[@thanhduongtien7709]

Thank u very much

[@itsisma6228]

When i use midside EQ i only have signal on mid ! there is no signal in side channel (EQ) i hear just Reverb ! can you please explain me why !

[@SoundDiggerFozo]

👍🙂 finally someone explain the matter even I do understand it. Keep it up pal.

[@diallodiallo5945]

good works!

[@ZeicoMusic]

Sztosiwo.

[@Jost2011]

👍 - _also_ for the YT algo! 😊

[@duhroadent]

I love it ..... You guys Rock

[@DJwizz76]

I've tried this technique before a long time ago, used to do it for years. You'd be better off getting Fab Filter Pro Q 3 for this honestly. Way better results.

[@kingsotall7128]

This is great

[@Plat1]

Man i cant wait for fl studio to add mid side processing to para eq 2 soon!!🙄

[@EynsomniacsStudios]

Incredible

[@JoKeR808]

How can I apply an EQ on the right only or only left

[@JunooMusic]

My Brain hurts

[@jasonsimmons671]

😂

[@akt1998]

정말 훌륭한 설명입니다.😜

[@kidhuddy101]

@4:47 how did he bring up the preset window in patcher? he cut it of the video ;(

[@MKZ984]

U help me a lot man🖤

[@Goldgorilla_]

Thank God for engineers.

[@exeza]

Thank you for the video! Where should I put MID/SIDE EQ in a chain? I mean before or after common EQ, Reverb etc.

[@Overxpossed]

in the master, under everything you have.

[@exeza]

@@Overxpossed thank you for your answer!

[@Overxpossed]

@@exeza your'e welcome!

[@Overxpossed]

@@exeza By the way, you can also mid/side EQ your synths or instruments too, as well, applying effects to each. For example, it's commonly used to put reverb on the sides instead of in the mid, while other effects are used to be used with the mids and not with the sides. Regarding EQ, you will like to have the low end of frequencies parts in the mid, and the high end of them in the sides. So bass need to be put in the mids regarding the stereo field. Snares too, even thoug they are crispy or more into the 500 Hz domain, they remain at the mids. It's also related to how punchier you want your mix. If the snare or kick is in the sides kind like you won't hear them as much and impactful if they're in the sides. Yet the snare can be in both; the body of the snare in the mid, the crispier sound if it at the sides.

[@exeza]

@@Overxpossed thank you again!

[@officialnanijayeli7863]

Bro make more videos on music theory please

[@112233aaify]

Спасибо. Я всегда свожу треки на мастер шине мид сайд. Ваш урок, мне помог.

[@ChessMusic138]

This video has changed my life. Lol, seriously tho thank you for this! buy far the most useful knowledge on mixing. You made mid/side eq easy to understand. The before and after of my tracks...wow tks again.

[@Roses_R_redeR]

What if you only have fruity Fire Edition... And you can't use Patcher... 🤔.. I know I should get all plug-in edition.. prices is a little steep at the moment.. It'd be really cool if you did a video on doing advanced things with small additions...

[@KhalilProud]

Thanks max 💖

[@gmagicbeats6435]

U're GOAT Max

[@Calicrazedbeats]

Cool stuff

[@dolbyatmos512]

Thanks brother

[@agthaog1986]

this is awesome but what i dont understand is how patcher/stereo shaper is able to tell which parametric EQ 2 is mid and whichone is side

[@theMixElite]

Check the Patcher Tutorial on this channel! We make a separate chain for the side and mid signal

[@toniverz_lofi]

Can you do mid side OTT tutorial?

[@na73604]

7:18 i just asked myself the same i was like 👀👀👀👀👀👀👀👀🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

[@Atomicitalia]

can we get a tutorial on pads? i can never figure them out. i never know what kinda pad to search for or even how to make my own pads.

[@fujiwarachika2187]

What's better for mixing and mastering, DT 700 Pro X or DT 900 Pro X?

[@gispee]

for some reason the histogram and heatmap arent visible in my side eq but when I change the graph it definitely works, anyone know why that might happening? yes i have made sure they are enabled

[@agus9807]

I hope somebody reads that but if i use the side splitter the sides sounds mono. I have a left and right vocal channel both panned and these go in a srcond channel with the splitter on it .

[@BasKRMRevolution]

Is the best✔

[@empyric949]

Would you normally throw mid side on the master just in general? Even if it’s only minor changes like you said

[@jinx-sh3kl]

Can you add a funk beat course

[@synckid2399]

Damn banana kiwi apple ,😂😢this is just wild.thx tho really nicely explained

[@robinj9631]

when i double click on the side eq in the patcher the eq doesnt open. any suggestions ?

[@abelgutierrez1283]

Brother, I don't hear any difference in sound during your demonstrations. Please help. I know Mid/Side eq'ing is a fundamental tool and works well, but for some reason I just can't hear any difference. KZbin compression? Untrained ears? Bad audio equipment? I have studio monitors and headphones, so I doubt it's gear.

[@808chadda]

Do you have any videos on FL mobile?

[@tomaszigor3117]

We do it only on a Master Channel, right? In mastering

[@ALDVIR]

Could you achieve this by sending your bus to 2 tracks and making one mono and one stereo through the mixer? And disconnect the bus from the master

[@shirsha5710]

Unfortunately, no. That's not how you'd go about it anyways. In case you want to use Mid-Side processing by having the Mid of the sound in one mixer track and the Side in another, there is a way to do so. What you'd do in this case is route the mixer track containing the sound(s) to which you want to apply Mid-Side processing to two other mixer tracks. In both of them open the Fruity Stereo Shaper. Choose the preset Mid in the mixer track with the Mids, and choose the preset aSide in the other one. Then, you can process the Mids and Sides separately in the mixer. Although, I'd always recommend Patcher for parallel processing like this. But, you do you.