FLUXGATE Part 3 - Who's Stirri?

It's been a while since I provided any Fluxgate updates, so here's the latest. Have you seen the name Stirri around and were wondering who they were? All questions will be answered here.
Stirri Product range (affiliate link):
stirri.com/BRANCHUS
Stirri Flux Review:
• Stirri Tacky Flux Rang...
Fluxgate Part 1:
• I've been using the wr...
Fluxgate Part 2:
• FLUXGATE Part 2! The n...
#Stirri #soldering #flux
T-SHIRTS
Do you like my wacky t-shirts? I buy all of them from Qwertee. Use the discount code: BranchusCreations to get £1/€1/$1 off your order. Check out the range here:
bit.ly/3OrJZkT
If you enjoy the content and would like to support the channel, please consider becoming a Patron:
/ branchuscreations
Of if would like to make a small donation, you can do so here:
www.paypal.me/branchus
Tools/Products used (paid links):
SOLDERING IRON
Hakko FX951: amzn.to/31QvCMW
SOLDERING IRON TIPS:
Bevelled edge soldering iron tip (T12-BC2): amzn.to/45NSrBK
Small bevelled soldering iron tip (T12-C1): amzn.to/3YVH5K0
Bent conical soldering iron tip (T12-JL02): amzn.to/3sx8lSU
Chiselled soldering iron tip (T12-KU): amzn.to/44tAo2A
HOT AIR STATION:
Quick 861DW: amzn.to/2ZjYzPH
SOLDER:
Kester 63/37 0.5mm diameter: amzn.to/3uviEIg
FLUX:
StirriASM: amzn.to/43nT05e
SOLDER WICK:
Goot Wick 2mm: amzn.to/3YWlRvw
TWEEZERS:
Hakko CHP 3-SA: amzn.to/2NqkhPz
DT71 DIGITAL MULTIMETER TWEEZERS:
amzn.to/41VcvSb
OTHER:
Vevor 30L Ultrasonic Cleaner (5% off on all Vevor sites code: VVMH5%OFF):
AU site: s.vevor.com/bfP7q7
US site: s.vevor.com/bfP7uN
EU site: s.vevor.com/bfQaMb
-----------------------------------------------------
Component suction tool (vacuum pen): amzn.to/44xyPkm
Microscope: amzn.to/2HnSI5H
Microscope camera: amzn.to/2TdSYsZ
Budget alternative microscope: amzn.to/2PmRagt
Budget alternative soldering station (uses T12 tips): amzn.to/2SeUpHg
Budget alternative hot air rework: amzn.to/3fN1ZU7
Helping hands (third hand): amzn.to/31JUhVL
Ultrasonic cleaning fluid: amzn.to/2YusoQQ
Fume extractor: amzn.to/2HuG0oU
UV Solder mask: amzn.to/2ZnK1yu
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/2xBnTso
28 AWG enamelled magnet wire (thick): amzn.to/32cRsLf
34 AWG enamelled magnet wire (med): amzn.to/35Bx20D
40 AWG enamelled magnet wire (thin): amzn.to/2J2Aisf

[@romancharak3675]

Thank you for keeping track of this confusing issue, Bruce. Greeting from Canada !!

[@BluesfireTV]

Thank you so much! I literally was just looking around tonight for what the hell was going on with Amtech flux, and now I know! Crazy to think it lined up the way it did for you to have uploaded this only a few hours ago! Can't wait to try out the Stirri V3!

[@AWalYT]

Just recently got a bottle of their Hydra formula and looking forward to giving it a shot sometime.

[@BranchusCreations]

I was really impressed by the HydraMA tacky flux.

[@dido1803]

Thank you for sharing. I look forward to seeing your follow up video.

[@rubenmejia4881]

Thank you for the update! Stirri fluxes are awesome! 👌

[@MrPnew1]

1:46 they did not reply to my query. Well, there's your answer right there Bruce.

[@cdyoutoob]

Congrats on the selection of fluxes. Looking forward to the test. Could you do a second video with effectiveness of IPA and common cleaning agents in ability to clean the flux away. ie What Stirri recommend compared with cheap stuff IPA 60%, 90%, 99% and commercial flux cleaners.

[@iiidiy]

Doing the tedious background work that we all get to benefit from, thank you! Looking forward to the full comparison!

[@CayMacVintage]

Thanks for the info. Loved it.. before this video I order a V3 and an ASM 30g kits so can't wait to try them out.

[@thomasb.900]

Holy flux

[@natedawww]

Wow, what a morass. Good on you for keeping up with it! Looking forward to the run-down!

[@SimjetAU]

Excellent video.....waiting on the next one from you. It was very confusing before but looks like Stirri gets my next order

[@cuppacheese]

You are doing God’s work sir, thank you!

[@SeanChYT]

Love the fluxgate series.

[@Vladimir-hq1ne]

Oh finally! Well, what an ouste review!

[@JDW-]

Useful info. Thanks, Bruce!

[@RuggersCustoms]

Ty Bruce!

[@nR-kv7xo]

stirri is using shopify to ship directly, not cheap at all, 1 tube $12 with $24 shipping (to canada), however, it is direct to consumer! I am absolutely pissed at amtech distribution and had some fake sent to me, so honestly this is great news, even if it's expensive, at least to have the real deal!

[@oa5275]

They seem to be on Amazon Canada as well. 30g ASM TF is 22.68 + 5.21 shipping.

[@lizzielecates4430]

Looking forward to the comparison.

[@turbochardged]

i'd love to know best use cases for all different kinds, and the odor they release.

[@BranchusCreations]

I've kept notes on the odour, and the best use cases are described on the Stirri website. I've been testing them with the sort of hand soldering I do, but unfortunately I can't really test them much further than that.

[@GarthBeagle]

That's alotta kinds of flux to go through!

[@naldoporto3189]

Olá amigo moro no Brasil e já usei muito o Amtech 559 v2 porem estou com dificuldade de encontrar os originais vir a alguns dias o da empresa Stirri que estou pesquisando sobre ele qual dele vc indicaria para usar em solda em geral como por exemplo em placas eletrônicas.

[@BranchusCreations]

Hi there, the StirriASM is probably my favourite, but I am releasing a video shortly where I test out a whole bunch of different fluxes and provide my opinion on them.

[@enzofitzhume7320]

👍

[@mikegreiling]

what kind of flux cleaner do you pair with this flux? do you clean the flux off the board after use?

[@rfmerrill]

For every kind of ROL0/ROL1 flux I've used (including ASM, V3, as well as MG 8341), I find the best way to clean it is to wipe off as much residue as you can with a dry paper towel or cotton swab, and only afterwards clean it with alcohol or MG 4140 flux remover. If you go straight for a flux cleaner you end up spreading it all over the board.

[@zzzychui3899]

Yeah STIRRI ASM is really good

[@CaesarBest]

How are you supposed to use those syringes without a plunger?

[@BranchusCreations]

They come with a plunger.

[@pomprocks]

Haven't you heard of the flux tube challenge?

[@rubenmejia4881]

What's that?​@@pomprocks

[@Verminator151029]

FAR OUT Muffin Man!!