FLYING MACHINE, Part 1: The base and main beam

[@htownblue11]

VINY B!!! This build is going to be a fun journey. Almost at 50K subs! And people need to appreciate the level of complexity this fella tackles in his garage. Not a huge shop. A garage. Impressive.

[@VinyB57]

Thanks bro! 👌 You are now been officialy "pinned" top comment 😉

[@paulfay357]

Viny B I love your stuff. Greetings from Missouri. As a 57 year old heavy equipment mechanic, finding an engineer with common sense...and dirt under his fingernails is like finding a five leaf clover! I'm much more accustomed to the engineers who place a red hot turbo charger right next to the radiator. Or the engineers who mount all of the filter bases upside down, so that all of the contents of the filters dump out as soon as the filter cartridge is loosened. I look forward to your videos. PS You've got me thinking about building a heavy version of your airbag trailer. Cheers!

[@VinyB57]

Hey I have nerver been called a 5 clover leaves 😅 Glad you appreciate my content! I also do a lot of mistakes like the exemples you listed...I just work my ass off till it works and is bullet proof!

[@keithviolette5870]

Just got a chance to watch this today! Awesome build eh! Can't wait to see part 2 and 3. Here in NH it was -15°F, and -47°F at the top of Mt. Washington. -45°F or C is insane!

[@AustinCoulson]

You are a wild man. I can't believe you are working in an unheated shop in that weather. Who was flying the drone while you were on the snow plow?

[@VinyB57]

You know I m a one man army, dude..I was flying it...well it s more setting it in a position than flying it .. but the outcome is Ok

[@Flmarques]

11:46 is the best. I’ve been there so many times!! This projective awesome. A little bit big, but awesome.

[@VinyB57]

Hey thanks Fernando👌

[@sylvain.robichaud]

T'es complètement fou....et j'adore! Tu deviens un peu le Colin Furze du Québec! :-) Keep it up, love it!

[@VinyB57]

Hey merci Sylvain! 👍👍

[@EuIo93]

I'm here after Colin built the exact same thing, 3 months later :|

[@dukie1616]

Yes just subbed liked and going to binge your smartbusa thang.

[@bearsstuff]

Definitely looking forward to the next video.

[@VinyB57]

Glad to hear it!

[@sazafrass]

I'm so glad you're OK.

[@VinyB57]

All good 👌

[@bushratbeachbum]

Love it!! Definitely following this!

[@VinyB57]

Thanks! 🤙

[@rjung_ch]

👍💪✌ Can't wait for part 2, thanks Viny!

[@VinyB57]

Still working on it 😅

[@rjung_ch]

@@VinyB57 it takes time for good work to be done. 👍👍👍

[@skutahuniai4830]

Tabernac!! That would hurt!🤣🤣

[@VinyB57]

Hope not!

[@SteveP-vm1uc]

I think this is pretty cool!!! Still waiting for the tandem axle, bagged car trailer though!! ;)

[@VinyB57]

Maybe next year..got some carbon fiber to do on the smart after this project... 😬

[@S-Lab52]

Как два лайка поставить!? Хоть и не понимаю языка, но видео ваше смотрю с удовольствием!

[@Jeff-tx8sd]

looks awesome

[@VinyB57]

Thanks!

[@Jdjd12288]

Another great video thanks mate

[@VinyB57]

Glad you enjoyed it

[@KnownSender1]

Great video man 💯👍

[@VinyB57]

Thanks Ryan

[@Tarry_Plaguer]

Thanks for the laughs. 😸 I always enjoy your content, and the fact that you don't mind showing your mistakes and can laugh at yourself, along with your viewers. The project looks like it will be fun when you complete it. Of course you will be doing a lot of Rock, Paper, Scissors with your son, on who gets to use it next. I am guessing that you will have a weight for each of you to add to the counterbalance for quick switching. I am also curious if Mrs. B is going to try it as well. Are you still planning to have a spinning harness so it does somersaults, or has that been replaced with a basket like enclosure?

[@VinyB57]

Hey thanks for the comment, yes there s still a spinning basket in the plans...that s gonna be a lot to manage at the beginning...so maybe it will be locked during the first trials...and I don t think other people will use it then me....it stupidly high! 🤦‍♂️

[@survivethewalkingdead3421]

It made you laugh...a lot. Lol. I was still laughing 3 holes later!😅

[@TheDaniels5s]

The unnecessary censorship got me 🤣🤣🤣🤣🤣.

[@VinyB57]

I like it too 😏!

[@Sierraman59]

Une pensée pour le pauvre focus qui n'en peut plus 🤣🤣 Tabarnak !

[@VinyB57]

Et oui, pauvre focus...y travaille fort! 😅

[@matthewjackson9765]

Try drilling a few holes in the track the holesaw diameter runs in,this allows the chips to fall out. Trust me, the life of your holesaws will increase, and time cutting decrease!

[@VinyB57]

Thanks for the tip

[@mariodubuc9304]

De ou au Québec? ...pas beaucoup de neige

[@wheellife]

why did you build it? ummm, because.... reasons. seriously, don't take unnecessary risks when it comes to safety - especially when working by yourself - Don't want to lose you to a an injury Viny! Keep it up!

[@VinyB57]

Will do man! 👍 Don t wanna loose my self either 😅

[@toxicgamer2835]

Are you gonna remodel your camper still?

[@VinyB57]

No, cause I'm gonna build one (more like a van or Earthroamer)...but like in 4-5 years...so stay tuned! 😂...but for real..I'm building and buying all my bucket list things...like the Smart Busa, now that flying whatever-thing that is, next is the tractor with backhoe and finally the camper...and with this you have my next 5 years of projects! 😮

[@jamespinto1405]

Please tell me your city is really Dickville

[@VinyB57]

Maybe.....not 😏 Getting better at this photoshop thing... 😅

[@tubathecoolkid6919]

Also you should pant it green

[@VinyB57]

Why the green🤔

[@kacho404]

I watch the video and wonder? What will your neighbors say seeing you hanging out there with that cold!

[@VinyB57]

I have the same question! 🤷‍♂️

[@pco1984]

@7:44 only using what's best for you safety.... MOMENTS after juggling the slicing ball of arterial openness what comes from the lathe.... use higher feedrate or a deeper cut, get that chip shorter m8.

[@VinyB57]

My late won't take it! It's an old thing...but I love it!

[@pco1984]

@@VinyB57 Ah that's fair. Have you tried a positive angle yet? Like a SDJCR holder with DCMT inserts with a small nose radius like 0.4mm or smaller (I don't know what size your lathe will take regarding the thickness of the holder.. gotta figure that out, but try to get the biggest it'll fit, for stability). Also, it may seem redundant, but buying from a "brand" is better usually regarding the inserts... Mitsubishi or Kyocera have great tools/inserts, I'd start there. If you're looking for a general, all purpose coating try the VP15TF (Mitsubishi).

[@VinyB57]

@@pco1984 sir...your are speaking a language that I had to googled! 😅I do have a SDJCR holder, but with cheesy chinesium inserts, so I don't use it that ofthen, only when needed. I'll try to find good-ish inserts and instead run that type of inserts next time, thanks for the info!

[@tubathecoolkid6919]

Death machine of death

[@VinyB57]

hope not! 😬

[@jtto6364]

WTF!!! That's not working weather!!! That's stay in the House weather. Fun fun fun!!!

[@VinyB57]

Glad you liked

[@benjaminreinhardt259]

All I can say is.... Canucks.

[@hothotllywood4192]

J'ai eu un réflexe de Français mais vraiment: je me suis dit pourquoi il démarre son tracteur tondeuse puis j'ai réalisé que c'était une déneigeuse. Bon j'ai honte mais que un peu. J'attends la suite de ce projet complètement fou. Pour l'instant la fixation sur la remorque me fait un peu peur.

[@VinyB57]

Faut pas avoir honte...c est pas courant d avoir un tracteur a pelouse comme deneigeuse...et oui, c est un autre de mes bricolage 😅

[@christownsend7602]

Is you wife the beneficiary on the insurance policy?