Flying the DJI Mini 3 Pro and Mavic 3 with the DJI FPV Goggles 2

[@FlyingBeeFPV]

This is 100 percent the video I was searching for the internet a long time now!!! Thank you so so much! Finally a creator with FPV experience flying the mini 3 with the Goggles 2. Can you please please tell me if you perceived more latency with the mini 3 compared to the avata? Is it more avata 40ms or RC control 150ms? I think the latency is the no 1. reason newbee drone pilots crash their drones because they are unaware of the latency! I would love you to do a comparison of mini 3 and avata + insta360 r 1inch mod without Battery in low Light for proximity!!! Thankyou again so so much. Now I need to sell my goggles V2 unfortunately😢😢

[@goblinio]

Great! Does this update work with the mini 2? Id love to try it out with mine.

[@LukeMaximoBell1]

Unfortunately I believe it’s only the Mini 3 Pro and Mavic 3 series currently 😑

[@el-fotografo_de]

Thanks!! This video is perfect 🤌🏻🤌🏻🤌🏻👌🏻👌🏻👌🏻

[@isrfpv]

Great video! Do anyone know if this will work with the new mini 4?

[@johnmajka5404]

They finally updated the Mini 4 Pro to be compatible with the Integra goggles Motion 2 Combo . I bought the Mini 4 Pro in December & I just got the AIR 3 and Integra goggles Motion 2 Combo. I can't wait to try this out.

[@YuZeMe]

thanks for the vid. I was wondering, does the FPV work also with the controller?

[@fujixplore]

Drone dji memang bagus sekali..👍👍 Terimakasih untuk videonya..sukses selalu

[@negraof]

One question. I have a Mavic 3 Pro and I'm also going to try FPV on it. When you use FPV on the Mavic 3, are the obstacle sensors disabled? Because it seemed to me that it passed very close to the leaves. Thanks

[@rocknrollboise]

Can you use a regular DJI remote or do you have to use the motion controller?

[@enzofournier1835]

Very nice video, thank you very much! About the 120 meters limitation, I think you said you were in France, and here in France 120 meters is our legal limitation.

[@alienlatino2945]

Here in Canada it's 200 m inside cities but 500 m outside cities.

[@josp60]

Can I also use the Mini 3 Pro with just the Goggles2 and the original controller without the Motion Controller?

[@andybeers4538]

Not sure about regulations in your country but in the US and Canada recreational drones are limited to 120 meters altitude. My guess is that's why it was set to that limit.

[@timmytfpv7316]

Can you shoot in portrait mode with goggles and motion controller

[@princesfpvdrones]

​ @Luke Maximo Bell Hang on, you mentioned that you can utilize the DJI FPV Goggles V2 with this set up? Are you sure? No one has ever mention this before. Love to see you demonstrate with the DJI FPV Goggles V2 which is what I have.

[@LukeMaximoBell1]

Sorry I think I made a mistake. It’s just the Goggles 2 and Integra.

[@princesfpvdrones]

@@LukeMaximoBell1 Aaaah I see, thank you!

[@cours458]

does it work with the previous generation of goggles? I haven't got the new ones

[@mariodellacorte]

Hi, have you tried to take a distance test?

[@gregdavidd]

How about head tracking?

[@LukeMaximoBell1]

I forgot to try it out 😭 next time! Haha

[@trailwisataexplore812]

Gooddd👍👍👍

[@matthewbell2032]

Nice!

[@Motown-firefighter]

Can you help me how you can fix the "not using bound device"?? I tells me i can fly 5 times only? Is there something you need to do in settings to make it bound? Thanks

[@timmytfpv7316]

Doing this with mini 4 pro but only getting 30 mbps ? How can i get 50?

[@BrauckMan]

OMG! Bro get a gimbal for you hand held! :). I was getting motion sick! lol. Great video. I wonder how it would work with people who have heavier prescription glasses.

[@GigaMemes_YT]

CAn i have the drone

[@LukeMaximoBell1]

Sure 😂

[@PowderMill]

👍🏼 Thanks for the video! I just wish DJI would stop their “nickel & dime games” l! Why can’t I use the expensive $$ RC-Pro or the RC-N1 controller with my Mavic-3? And… why can’t I use my ORIGINAL Motion Controller Dildo (purchased with my FPV-Drone “potato” drone)? They expect us to buy yet ANOTHER device, the “Motion Controller 2” and the ILL-FITTING Goggles 2 just to experience flight with goggles. I had long been using the Orqa FPV One Pilot Goggles connected to my RC-Pro controller’s HDMI (mini) output. I then switched out the Orqa when the “HDMI Device Not Supported” message began to appear every few seconds. I went with the new HD-Zero goggles…. They are fantastic btw! I’m experiencing a slight issue with “hangs” that appear with the Mavic-3, but have every confidence they will resolve this with a firmware update. So, WHY buy all of the DJI $$ add-on crap ? Because I was a sucker and thought it would be very high performing like most of their products… I have so much unused DJI gear sitting on my shelf, but still go back for more punishment. 😉 I bought the DJI FPV Potato Drone but never had the guts to switch over to “manual” I have the DJI Goggles RE (“Racing Edition”) which I bought when I wanted to experience “FPV” flying with my Mavic-2 Pro and Zoom drones. They were far too heavy for comfortable wearing as I have A.S. (Ankylosing Spondylitis) and it’s literally painful just to don the goggles. BUT… DJI had a phenomenal feature included with the Mavic-2 series… DUAL CONTROLLERS! This permitted multiple pilots for training and a separate pilot / separate camera operator by just purchasing a second controller OR the initial “Smart Controller”. Of course, they ditched this awesome and PROFESSIONAL feature after DJI moved everything to the “FLY App”. The

[@HansDieterStich]

BTW, Luke, maybe you don't know, but flying FPV without a spotter is illegal in the EU 😎. These EU drone regulations are also the root cause for the allowed maximum speed of 19 m/s and the 120 m AGL limit which you noticed when flying the Mavic 3 Classic.

[@ivm1646]

By spotter you mean what exactly?

[@scetchport]

​@@ivm1646you need a second person spotting to warn of any problems that may arise that are out of the goggles field of view. Also illegal to fly drone out of a persons visual distance. Must be in visual contact.