Great video! And the FS-i6 is a very good transmitter. Try to use as thin and elastic cable as possible! I already got 4 models with this modification. You could measure up to 3 cells batteries, max 10V. Thus, you'd have alert at 9.9V (3.3 per cell) and alarm at 9.3V (3.1 per cell) that sounds too low. You could also measure a voltage of only one cell, which is acceptable on batteries in good working condition.
@446644664466411 ай бұрын
Wow really easy to do ,you make the receiver look bigger than it actually is ,very tricky for old eyes but doable thanks just need to set voltage alarms next not really sure how to do that but keep will keep trying many thanks
@fischtech5544 Жыл бұрын
Great video, it was a huge help for me. I am using a 3s Lipo, works fine. Thank you!
@Jerac10002 жыл бұрын
Did this mod works with another transmiters? I have TX16S with multiprotocol, and I wonder if It will work too…
@gregorydahl2 жыл бұрын
You are supposed to read voltage off the screen on the tx ?
@feltav57192 жыл бұрын
Can you use still use other sensor like the altitude after this mod?
@fireballxl5745 ай бұрын
Hello, Any chance you could provide the same instruction for the current version of the FS-IA6 receiver? They’ve updated the circuit board to a different layout… John
@mickbastion2 жыл бұрын
hello, it works, but when I tried to cut the tin between the pin and bat the receiver no longer works, and I can no longer use it, you would have a solution to bring it back to life
@MrMightybull2 жыл бұрын
Das ist ja mal geil!!! 👌👍
@MarkRobinson555 Жыл бұрын
Really interesting and useful video, 😊
@TX010 Жыл бұрын
Smart 👍💪🍻
@ishigamiyu19913 жыл бұрын
does this work with i6x?
@ishigamiyu19913 жыл бұрын
this was very useful. thanks.
@lennartwauer3662 Жыл бұрын
Thanks for the video! I’m want to fly with a 1s lipo and I’m wondering if the voltage telemetry would work with a 1s lipo too. It only has the jr or the jst adapter. Do you have an idea for that?
@ishigamiyu19913 жыл бұрын
can I do this on the fs i6x. is the intV and error function available on fs i6x? I'm looking to buy fsi6x
@Adritangopo3 жыл бұрын
Hi. I didn't try this Tx. But I just had a look at the manual and I see that it shows IntV1 on the screen. In this example you can read 4.98V. After doing the mod I presented in the video you will read the actual battery voltage.
@f0xvibes3 жыл бұрын
Thanks for your work and the sharing, i appreciate that. Can it work on 3s/4s? What's the maximum voltage i can connect to my receiver?
@Adritangopo3 жыл бұрын
Hello. The max voltage to power the receiver is 6.5v indicated by the manufacturer. But the voltage that you can test is higher. I most of the time fly 3s (11.1V nominal) batteries using the bec in the esc to power the receiver.
@adrianolteanu80763 жыл бұрын
Works on 5s
@adrianolteanu80763 жыл бұрын
???
@prajvalbs87873 жыл бұрын
Will this work on 4s lipo
@ΜακηςΚαλκανας Жыл бұрын
Hello I want to buy remote control +gps+autopilot for fishing boat .you have any idea. Thank you
@ferdieg1402 Жыл бұрын
Hi, did you get a radio for the boat??
@thanhhoa87463 жыл бұрын
Can i still use the ch1 channel if i close my eyes? And the battery indicator to tx is correct or not. Looking forward to your help !
@rcflyingprojects84823 жыл бұрын
Yes, CH1 is still working as normal and the voltage indicated is very accurate.
@thanhhoa87463 жыл бұрын
@@rcflyingprojects8482 yes thanks for the video. And can i use the same to use for the 3s 11.1v battery? Will damage the device when using 3s battery.
@Adritangopo3 жыл бұрын
@@thanhhoa8746 I don't know what the max voltage is, but most of my batteries are 3s and no problem with them.
@fredericgrob3843 жыл бұрын
Did somebody test with a 3S 11.1V battery ? I would like to add a Variometer (this one FrSky Variometer Sensor w/Smart Port (High Precision Version) on hobbyking website), is that possible with the update of the FS-I6 transmitter to 14 chanels and a FS-IA6B receiver ? how to connect ? how it work on the transmitter, when glider goes up sound ? goes down another sound ? Is that possible ? Thanks for your advice
@rcflyingprojects84823 жыл бұрын
Hi, I mostly fly 3s batteries with no problem. I also have a glider with a variometer connected to my FS-IS6B receiver, you connect the sensor directly to the i.Bus input in the receiver. The sensor I use is the FlySky-FS-CAT01: www.banggood.com/FlySky-FS-CAT01-Altitude-Sensor-I_bus-Data-Port-Compatible-FS-i6-FS-i8-FS-i10-Transmitter-p-1661314.html?cur_warehouse=CN&rmmds=buy On your upgraded transmitter you have a function called "Vario", that is what gives you the two different tones when the plane is climbing or sinking. I loved that function! Good luck!
@fredericgrob3843 жыл бұрын
@@rcflyingprojects8482 Hi, thank you very much for all these informations, I will order this receiver and vario and let you know.
@fredericgrob3843 жыл бұрын
@@rcflyingprojects8482 Hi, I'm ordering the material, but struggle to understand how I'll be able to connect a tension sensor and the altitude sensor on the FS-Ia 6 or 10 receiver. On each sensor à can see a plug with 3 connections like on a servo. Even if I see 3 sensors inputs on the I bus side.
@Adritangopo3 жыл бұрын
@@fredericgrob384 You need a FS-IS6B receiver. There is only one input (three pins servo like) for sensors on the receiver, but the sensor has a connector that connects to the receiver and on the other side it has an "IN", a female conector where you can connect another sensor, like in a chain. I don't know how many sensors you can connect.