ATR aircraft have manual primary flight controls with electrical trim and hydraulically powered secondary flight controls. All variants are covered. On Facebook: / 1140864699685560 Support me: www.paypal.com...
Пікірлер: 86
@bretasfotografia507718 күн бұрын
A VOEPASS ATR 72 has just crashed in Brazil. There's a video showing the plane in a flat spin, with an insane ROD. Looks like they had a serious FLT CTRL failure. RIP all the occupants.
@eeeeeerickson15 күн бұрын
Falha nos profundores será?
@Sailingengineer743 жыл бұрын
I fly as passenger frequently on Finnairs (Norra) ATR planes, your educational videos has made my flights really exciting, knowing how the airplane works and basic routines! Thank you!
@cavok1984 Жыл бұрын
I'm slowly working my way through the vids. I have to say the presentation and explanation are excellent. Easy to understand and a total joy to watch for anyone interested in how an aircraft works
@FlywithMagnar Жыл бұрын
Awesome, thank you!
@braininavatnow9197 Жыл бұрын
Agreed
@malcolmcampbell9887 Жыл бұрын
Great video thanks Magnar, I really like the footage inside the rear access panel. I only fly the ATR72-600 but enjoy learning about the other variants, keep up the good work.
@sverigeaao51963 жыл бұрын
What a neat video! Love seeing the large space behind the bulkhead, I thought it would be absolutely crammed but is isn't!
@VM-19644 күн бұрын
Hello sir, The English translations of your voice, shown as text in the video, sure need a re look... Otherwise, a splendid trg video as always👍👍👏👏
@spinbirdman3 жыл бұрын
Crisp, Clear and Concise video Captain. I enjoyed this thoroughly. Thanks!
@nzmarty Жыл бұрын
Great video thanks Magnar. I am starting ground school on the -500 next week and your entire collection has been invaluable. Regards :)
@FlywithMagnar Жыл бұрын
Glad to help!
@rolandolero98253 жыл бұрын
Thanks for help Azul Air lines' pilots from Brazil! 👍✈️
@Oferb5532 жыл бұрын
Thanks for excellent flight controls and systems review. Waiting for more...
@sklajban Жыл бұрын
Yet another excellent video! Many thanks for that!
@pavelavietor12 жыл бұрын
Hello great cinematography thanks for sharing this with us saludos
@anajnaren6 ай бұрын
Thank you for a great video. Quite informative. I am not working in the aviation industry, just interested in aircrafts. I have a question. From your videos, what I understand is that, the main flight controls are operated by pure physical muscle power, isn't it? It is not assisted by hydraulics? In the age of power assisted steering in cars, why are the flight controls are not power assisted? I assume in larger aircrafts, the controls are operated by hydraulics. So, up to which size of aircrafts are the flight controls not assisted?
@martinjanik92213 жыл бұрын
Thank you for another one 👏👍
@videorocker2562 жыл бұрын
Thanks for the wonderful sharing sir
@jameschen90993 жыл бұрын
Very educational. What's the reddish fluid stains all over the inside walls of the tail cone ?
@FlywithMagnar3 жыл бұрын
It's a anti-corrosion coating. It's thin, enabling it to penetrate very small gaps.
@cavok1984 Жыл бұрын
It seems a bit ironic that it is a rusty colour. 😁
@steveq34 Жыл бұрын
Awesome video
@Petrarche7 ай бұрын
Hello, Captain. Why do we have the 180 IAS limit for ELEVATOR JAM and PITCH DISCONNECT? Is it to prevent structural damage to the control surfaces?
@FlywithMagnar7 ай бұрын
No, it has to do with the controllability of the aircraft. When you have only one functioning elevator, you have reduced controllability, and the higher the speed, the higher the control forces.
@fuerte2002 ай бұрын
How do you manage a go around with Flap Unlk on approach? Do you keep flap 30? Or go to flap 15 like normal on a go around? Also speed management with flap speed limits??
@pethraolson60683 жыл бұрын
I really liked this video. 👍
@rockerkunal3 жыл бұрын
Hi captain! Amazing video as usual. In case of pitch disconnect, is there a way to fix which control column will be PF, or it a random chance ?
@FlywithMagnar3 жыл бұрын
When both elevators are free, it's up to the pilots to decide who shall be PF.
@spinbirdman3 жыл бұрын
Usually a pitch disconnect is manually done after an elevator jam, in which case, the pilot on the unjammed side will need to be the PF.
@aviationtalkandtutorials24563 жыл бұрын
Good work captain, thanks for the educational video, at <a href="#" class="seekto" data-time="510">8:30</a> does this mean both props are rotating in the same direction? which one? and does it feel like a Cessna in take off? I mean do you have to apply right rudder during the take off roll? thanks
@FlywithMagnar3 жыл бұрын
Both propellers are rotating clockwise when viewed from behind. As I say in the video, the rudder trim is set to neutral at take-off. The ATR has a natural tendency to go straight on the runway. When you rotate, there's a slight yaw to the left, but most pilots do not even notice it. Once established in climb, the aircraft is going straight. As the speed increases, there will be a need to trim the rudder to the right.
@imagine9033 Жыл бұрын
Top
@amoshiniamoshini52982 жыл бұрын
Very useful thanks for you
@chomanthapa7 ай бұрын
What is the neutral position of pitch trim indicator ? 0 or 1 ? for ATR 72 500 and ATR 42 320?
@FlywithMagnar7 ай бұрын
Neutral trim is used when the centre of gravity is 25%. For ATR 72-500 the trim is set to 1.3 up. For ATR 42-320, the trim is set to 0.0.
@andreaskoumertas695 Жыл бұрын
Hello captain¡ in case of flaps asymmetry or flaps unlock that you have to land with reduced flaps, how do you decide if it’s going to be flaps 15 or flaps 0 table¿
@FlywithMagnar Жыл бұрын
Asymmetric flaps: Use the speed for indicated position. If it's between two positions, select the one that gives the highest approach speed. Flaps unlock: The flaps is at 0 position.
@Fa7733 Жыл бұрын
Why does the ATR72 rudder trim tab end with a flat plate instead of a streamlined trailing edge like a normal aerofoil?
@FlywithMagnar Жыл бұрын
Because it doesn't make any difference when it comes to drag.
@steveq34 Жыл бұрын
Hello Magnar. What is the max altitude at which flaps can be extended?
@FlywithMagnar Жыл бұрын
There's no max altitude, only max speed.
@freefirefffreefire67592 жыл бұрын
Bro nega ena app la bro edit pandega bro plzz next videos la soluga bro
@user-ey3rg3nc5s Жыл бұрын
Greetings Captain, I need ask a few questions to assist in understanding the system. Specifically, 1) With autopilot and yaw damper engaged . To trim the rudder in the yaw axis is the autopilot doing the trimming on the spring tab or only the rudder or both i.Or is it the yaw damper only providing the signals? 2} In manual flight when we move the yaw trim control switches are we acting on the spring tab only or on the rudder and spring tab simultaneously? I am somewhat confused. Many thanks
@FlywithMagnar Жыл бұрын
Rule #1: The rudder trim acts on the spring tab. The spring tab acts on the rudder, and the rudder deflection increases with the airspeed. Rule #2: To use the autopilot, the yaw damper must be engaged. In aircraft without glass cockpit, it is the pilot who acts on the rudder trim reagerdless of the status of the yaw damper and autopilot. In aircraft with glass cockpit (600 version), the rudder trim is automatic as long as the yaw damper is engaged.
@user-ey3rg3nc5s Жыл бұрын
@@FlywithMagnar Thank you
@gilbertofigueira5472 Жыл бұрын
Hi, I have a little doubt, does the atr 42-600 and 72 fly by wire? Or doesn't have any fly by wire system?
@FlywithMagnar Жыл бұрын
No, all ATR aircraft have mechanical flight controls.
@cruxader273 жыл бұрын
I wonder why ATR never decided to utilize spoilers for landing until the 42-600s?
@FlywithMagnar3 жыл бұрын
In the late 1980s, when ATR 42 was developed, the company considered that the market for STOL aircraft to be too small to be commercially viable. They were right because de Havilland Canada made excellent STOL aircraft, which sold in small numbers. However, when the Dash 8-100 and -200 are no longer are in production, there's a growing market for a 50-seater that can operate from 800 m runways. Therefore, modifying an existing design makes sense today.
@ademarortega1902 жыл бұрын
Sir please upload the door,navigation and communication.
@braininavatnow9197 Жыл бұрын
How do the elevator and rudder control cables/rods pass through the aft. pressure bulkhead without leaking cabin air or abrading?
@FlywithMagnar Жыл бұрын
Pressure seals are installed where cables (or rods) move through pressure bulkheads. The seal grips tightly enough to prevent excess air pressure loss but not enough to hinder movement of the cable. In other words, there's a small air leak, but this is acceptable. Reference: www.aircraftsystemstech.com/p/aircraft-rigging-aircraft-rigging.html
@braininavatnow9197 Жыл бұрын
@@FlywithMagnar thank you sir
@tovip26972 жыл бұрын
Hello Magnar, what a wonderful video! The rudder is quite complicate, but it seems to work very fine in terms of pilot comfort. I think you did a very good explanation for the working principle of the rudder. A little question came up during watching your explanations regarding the rudder: When you move both yaw trim switches to position "NOSE RH", does the spring tab move to the left (when viewing the rudder from top) or right, and what would be the indication? It is a bit confusing to me, since the switch is about the "aircraft nose", and the trim indicator shows the "motor displacement". From my understanding the trim tab must move left to yaw the aircraft to the right... *total confusion coming up*
@FlywithMagnar2 жыл бұрын
When you move the trim switches to the right, the spring tab moves towards the left. This creates an aerodynamic force that moves the rudder towards the right, which in turn creates an aerodynamic force that moves the tailfin to the left, causing the nose to turn to the right. The deflection of the spring tab depends on two factors: Trim tab motor displacement and the airspeed.
@tovip26972 жыл бұрын
@@FlywithMagnar Thanks for confirmation. So the indicator in case the switches are moved to right ALSO point to the right (despite the trim tab is travelling to the left)?
@mrturboprop17432 жыл бұрын
Captain, if we don't get the 'jolt' for Rudder Cam - Center...do we have to redo the checklist item?
@FlywithMagnar2 жыл бұрын
@@mrturboprop1743, no, we don't. That means the rudder cam is already perfectly centered.
@user-ey3rg3nc5s Жыл бұрын
With autopilot engaged and yaw damper engaged ,if we get a RUDDER MISTRIM on the FMA .(Say engine failure during cruise) What are the corrective actions ? I cant find anything in the QRH or FCOM Thank you
@FlywithMagnar Жыл бұрын
When you have a rudder mistrim, you must disconnect the autopilot and trim the rudder manually. In case of engine failure or shut down during cruise, you should reduce the speed to less than 180 kt to activate TLU low speed mode.
@user-ey3rg3nc5s Жыл бұрын
@@FlywithMagnar Much appreciate your time for responding to my question . Many thanks! You are the best !
@sylviaelse50862 жыл бұрын
So, no provision for aileron jam. How easy is it to control roll with the rudder?
@FlywithMagnar2 жыл бұрын
We do this scenario during our type rating course. It's pretty easy to fly with the rudder because it's very powerful. A jammed rudder is a little harder, but we can still land safely.
@sylviaelse50862 жыл бұрын
@@FlywithMagnar Thanks for the info, and for your videos generally.
@shubhammhatre3818 Жыл бұрын
Great video! I was just wondering why are the aileron indication displayed in white while the rudder trim indication is displayed in green in Autopilot for the 600 variant?
@FlywithMagnar Жыл бұрын
When the Autopilot (AP) is engaged, the aileron trim indicator is white, indicating it is inhibitted. When the AP is disengaged, the aileron trim indicator is cyan, indicating it can be operated manually. When the Yaw Damper (YD) is engaged, the trim indicator is green, indicating the rudder trim is automatic. When the YD is disengaged, the trim indicator is cyan, indicating it can be operated manually. Note: The AP can only operate when the YD is engaged.
@shubhammhatre3818 Жыл бұрын
@@FlywithMagnar Thank you for the explanation!
@shivapoudel9059Ай бұрын
@@FlywithMagnarcant we use rudder trim manually ,if yd is engaged and autopilot is disengaged? if so how to correct the trim if slip indicator in ehsi shows slip or skid?
@FlywithMagnarАй бұрын
@@shivapoudel9059, on the 600, the rudder trim is automatic when the yaw damper is engaged. It will keep the slip indicator centered. It can even counteract an engine failure.
@shivapoudel9059Ай бұрын
@@FlywithMagnar if we use rudder trim manually with yaw damper engaged, does it move rudder trim setting or not? and more query..do we need to center the rudder trim manually after the yaw damper disengagement while landing or not?cant we land with yawdamper on in atr 72 600.
@user-ey3rg3nc5s Жыл бұрын
Dear Captain , under what conditions do we use the standby pitch trim ? Many thanks.
@FlywithMagnar Жыл бұрын
When the normal pitch trim doesn't work.
@user-ey3rg3nc5s Жыл бұрын
@@FlywithMagnar ok ,so what would cause the normal pitch trim to be in operative for example? Thank you
@FlywithMagnar Жыл бұрын
@@user-ey3rg3nc5s, loss of electrical power, mechanical failure in the switch, etc.
@matasmisevicius1029 Жыл бұрын
does anyone know how ATR 42 Ailerons is connected to the wing itself?
@FlywithMagnar Жыл бұрын
Yes, with three hinges.
@matasmisevicius1029 Жыл бұрын
@@FlywithMagnar Thank you
@EduardoMCfly2 жыл бұрын
Hi Cap! :) Why is the pressure bulkhead full of oil spills?
@FlywithMagnar2 жыл бұрын
It's not oil. It's a thin primer used to prevent corrosion.