FOCUS ST GETS OIL BREATHER KIT AND RS OIL COOLER

[@dra93n]

What a life you have! Hanging out with all the modded cars. So jealous, keep up the good work George!

[@jasonlolotte4262]

Great vid George, BD guys know their stuff, putting some great content out themselves. Keep up the good work.

[@alandonnelly9788]

Those fellas at BD performance really know what there doing great video again george 👏 🙌 👍

[@mcgherkinstudios]

Good call on the RS Oil Cooler. Cheap enough thing to install and a decent bit of extra cooling.

[@simonlowe4013]

Great video fella, your ST is well on its way 👊🏻👊🏻

[@BDPerformanceWrexham]

Another awesome video. We’ve certainly learned a thing or two about the content side of things and for that we can only thank you! Really look forward to working with GCM going forward with the things we have planned 🙌 Why didn’t you GCM the RS - disappointed 😂

[@danielbright1540]

Do the steering wheel controls work on the grey mk2 also is it a mk3 focus wheel?

[@BDPerformanceWrexham]

Daniel Bright almost all of them do... just not quite there with that one. Not sure when we will get a chance to address it and see if we can make it fully functional... Perhaps a video we could do with George 🔥

[@kellysworld2850]

I always love the little innuendoes 😂 Loving the constant content right now!! Dread to think how much it hurt your bank balance though 😆

[@styusuf5671]

Never ending list of mods for these cars....got driveshafts to do next but not sure what comes after....yours is coming together nicely George😎

[@Farmtrucker32]

Hi George! Michael all the way from South Africa. Also got a mk2 pfl st3 currently in for motor rebuild. Anyway theg spoiler extention you have. Were can i get one? Ps love gou vids👌

[@audi0syst3m62]

does the airbag work in the grey st ? this wheel looks so much better than stock, I'm in love

[@AlanXR6]

Hey George ... Loving these video's at BD Performance ... great job! You mention build numbers of the ST-500 when showing car build number 2 ... with number 1 of 500 going to Ford Heritage. Did you notice that the ST-500 you are giving away has build Number 1 of 500 on it's plaque!! Have you actually got the Ford Heritage car??

[@filippofiorito2494]

Why not use the same pcv valve and direct the oil vapor discharge outside, without using the oil catch can?

[@paulsee1488]

Top video man 👌 just need a bigger turbo now 😈

[@BDPerformanceWrexham]

paul see he may break the trend and go smaller... 😂

[@ThePaperchaser1000]

I'm surprised your not running the BD performance crossover....awesome but of kit

[@damo7124]

On that grey st dose the cruise contol work cuz if so I getting my self a mk3 Steering wheel 😂

[@richardyoung7022]

He just needs to finish off the wiring for it to work

[@Fhockne]

Hi. Where did you buy oil filter houses?

[@BDPerformanceWrexham]

Fredrik höckne from store.bdperformance.co.uk of course 🙌

[@gearivan1984]

¿Por que no usan la válvula PCV original?

[@stephenstyles4938]

Nice vid bet his decated

[@damiantaylor7993]

I drew that focus and the McLaren for Darren

[@charlienicholaswxm4505]

I’m from Wrexham I have a mk2 st3 340bhp always take my car to BD

[@Woom88]

I wish we knew what spoiler Chris has on his orange ST! It looks great like original RS spoiler but I hope there is a replica so good like the original RS but with the price of a replica!

[@chrisstowell-smith3739]

It's the original rs one

[@Woom88]

Chris Stowell-smith Looks great! Thank you!

[@marvinroth263]

why are there 3 hoses the new welded thing got just 2 plugs

[@GCMYT]

One of them deposits the excess into the atmosphere. It’s fed from the breather kit towards the floor down by the undertray :)

[@marvinroth263]

@@GCMYT so it's like the small filter you see on other catch cans from ebay for example

[@AndreyFormigari]

I did an almost equal one, but on the top I put a small filter to let the gases out... However, sometimes it ends up leaking a little through the filter when I accelerate hard for a long time... is this normal?

[@filippofiorito2494]

I'm also following for an answer

[@alexespinoza14_]

😶‍🌫️ transmission cooler and oil catch can with air breather

[@hughjarse4627]

Tim nice but dim

[@filippofiorito2494]

Why not use the same pcv valve and direct the oil vapor discharge outside, without using the oil catch can?

[@MrSpeedy99]

Mess on the car, mess on the road, not good for the environment.