Focusrite Scarlett 2i2 vs Solid State Logic SSL2+ Audio Interface

In this video we compare the Focusrite Scarlett 2i2 Audio Interface to the Solid State Logic SSl2+ Audio Interface.
EQUIPMENT FEATURED IN THIS VIDEO:
► Focusrite Scarlett 2i2 Audio Interface: currentprice.io/scarlett_2i2
► Solid State Logic SSL2+ Audio Interface: currentprice.io/ssl2_plus
► Shure SM7B Dynamic Microphone: currentprice.io/shure_sm7b
► XLR Cable: currentprice.io/xlr_cable
► TRS Cable: currentprice.io/trs_cable
► Table Top Mic Stand: currentprice.io/desk_stand
These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.
XLR CABLE BUYER's GUIDE: kettnercreative.com/buyers-gu...
PODCAST BUYER'S GUIDE: kettnercreative.com/buyers-gu...
LIVE STREAMING BUYER'S GUIDE: kettnercreative.com/buyers-gu...
MUSIC PRODUCTION BUYER's GUIDE: kettnercreative.com/buyers-gu...
CHAPTERS:
0:00 - Introduction
0:30 - Price
0:55 - Specs
3:00 - Inputs & Gain Setup
4:35 - Air Vs 4k - Upper Frequency Lift
5:11 - Phantom Power & Layout
6:50 - Monitor, Headphones & Output
8:37 - Scarlett 2i2 & Shure SM7B
9:36 - Scarlett 2i2 Air
10:07 - SSL2+ & Shure SM7B
10:34 - SSL2+ 4k
11:30 - Final Thoughts
STUDIO EQUIPMENT:
Editing Computer: currentprice.io/16_mpb_m1max
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Headphones: currentprice.io/nth-100
Studio Monitors: currentprice.io/adam_t5v
Studio Subwoofer: currentprice.io/adam_t10s
Video Recorder: currentprice.io/ninja_v
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
SOFTWARE & TOOLS:
Final Cut Pro: geni.us/qW5K
MotionVFX Plugins: geni.us/5SFH6w
Affinity Photo: geni.us/86RLOhZ
Epidemic Sound: geni.us/eiPf1G
Envato Elements: geni.us/ENFErA
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.
All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.
Copyright: 2024 Kettner Creative Inc., All Rights Reserved.

[@VAEOMMusic]

The high frequency boost on ssl sounds more natural

[@frontprochproduction]

Just ordered the SSL+. Having the midi is a great option and one I hope to be using more often. The second headphone output is a game changer for me as this unit will be used for mobile recording. I loved your comparison of the "air" option versus the "4k" button, that was very helpful. The 4k seems much more useful to me as it is not "boomy" on the bottom end like the air sounds and it was much more subtle than the air effect. The 4K just made your voice sound a bit more "forward", which is good. Lastly, the difference in the noise at full gain is very obvious. My studio interface is an Apollo Twin, and those pres are super quite. I got the SSL2+ so I can retire the Apollo from the road, (which I have wanted to do for years), because I have never been comfortable taking that unit out of my studio. Thanks to SSL, I now have an interface that can give me mobile recordings that are comparable to the Apollo in a much more affordable piece of gear. Great video, thanks for putting it together.

[@Tonsaay]

I go with SSL2+, thank you for the video comparison.

[@kettnercreative]

Good choice, that's my favourite right now.

[@almas7123]

Don’t just write that and run away. Tell us why? I’m hoping it’s not because we tend to be bias and look at brand/company and price. I’ll be honest, after watching this I thought they were both great. One of my struggles is do I want my cables showing or not (back or front)

[@kettnercreative]

@@almas7123 Run away? I respond to nearly every comment, who's running away? The SSL2 has more gain, more dynamic range, less noise, more I/O (connectivity), better gain display, two headphone outputs, and a blend knob. All of which the Scarlett 2i2 can't compete with. It's a coin toss if you may prefer the Air over the 4k mode, though.

[@almas7123]

@@kettnercreative lol okay not sure what happened but my comment was for tonsaay. I appreciate this video though!

[@mikehunt576]

I have both, the 4i4 is actually the equivalent to the ssl2+, 2-2 ssl2 then 4i4 ssl2 plus... Now if you run into the focusrite then the ssl2 you would be surprised what you will hear.., incredible pres

[@phillipwaterman1]

I had this since it came out and love that 4k button sounds natural

[@TerryWorthArtTeacher-jg4rz]

This is a great objective review; comparing all the specs, features, etc. ! Thank you. You have saved me from spending additional agonizing hours trying to decide between these two AIs.

[@priaronna14]

Thanks a lot for your explanation. It´s been so hard to decide which one shoud I buy. Maybe after watched your video I will buy the scarlett one, even prefering SSL2, because here in Brazil is very hard to find SSL2 and when you find is very expensive. Thanks a lot and have a good one!

[@alexsavastru8125]

The things that made me want to upgrade to the SSL 2+ are the dual headphone inputs (can have closed back for rec, open back for production/mixing without getting side-eyed by the family) and the separate monitor/phones volume control. I hate having to reach over my 3' wide table to the back of my Kali's to switch them on or off.

[@atrxyu]

Great video, thanks! Definitely considering the SSL now..

[@Un-Ez]

Really enjoyed your video, so I subscribed. Buying an audio interface tomorrow. Your video pushed me toward the ssl2. Sounded a bit fuller to me with your voice. 2 questions for you? What’s the headphone amp quality like? 2nd question. If you prefer one more than the other why?

[@TheFonzieScheme]

Such a thorough breakdown of both products. Thank you for this.

[@kettnercreative]

Glad it was helpful!

[@MrFunkeyMonkeyZz]

Hello, i just starting watching your videos and you've helped me make a lot of decisions on items i want to buy. The question is, in one of your videos comparing the Scarlett and the Yamaha analog mixer, you replied in a comment saying "Solid state is more powerful pre-amp than Scarlett" and so i became interested in the Solid State over the Scarlett. But the problem i ran into is i would like an nondestructive interface but the solid state only has 2 XLR ins. Because i would like the option of 4 XLR ins, would you still recommend buying the Scarlett 4i4 although it doesn't have more powerful pre-amps. Any other options that don't totally break the bank? Thanks.

[@fugamantew]

Really thorough and succinct comparison-thank you.

[@kettnercreative]

What one do you like better?

[@fugamantew]

@@kettnercreative The SSL2+ is superior for sure.

[@peterblackmore7560]

Good comparison. I like the way that your hand falls down on the large Monitor level control (BTW - API potentiometers) and that the cables are at the rear, out of the way. So great specs, pres, performance and ergonomics - SSL2+ for me.

[@busbybinne]

I just discovered your channel and appreciate your straight forward approach to gear comparisons, keep it up! If I could ask how does that Stereo button work on the SSL? Is that something that would help with mixing in mono or is it just meant for DJ situations?

[@kettnercreative]

The stereo button only changes how the monitoring works. In your headphones you can choose to have channel one in the left ear and channel two in the right ear. Or, you can choose to have both channels in both ears. This won't have any effect on what is being sent to the computer for recording.

[@patriciomontero4458]

Hi Kettner Creative, I am pleasantly surprised to read that you answer many comments, so maybe I get lucky: do you plan on doing any video comparing pre-amp quality and specifications with a Steinberg UR? Because I heard very good stuff about the SSL 2, but would like to see how it compares to what I already own before investing in a new sound card (particularly during these times where everything is at a stand-still for performing musicians like yours truly). I got good recordings from a UR22 under very complicated circumstances (cheap ribbon mikes that were really low output, and gain set up to maximum). I can post a link to it, it is somewhere on youtube (the violinist I was playing with posted).

[@adityabali1939]

Thanks for detailed video. I’m looking for a MIDI capable audio interface with robust preamps for playing live, hooked up with a midi controller for guitar. Multiple outputs are very welcome on stage in a live setting. I think I’ll go with the SSL2+ to me it sounds superior

[@kettnercreative]

100%

[@RyanLovesReds]

Ssl2 is the better product, just got the plus. Thanks for the vid!

[@kettnercreative]

Yeah. I love it.

[@QUDASCIENTISTTV]

Great video. Very informative. Thanks!

[@TheTrueTeknician]

Great comparison. Thank you.

[@MagnusCrimson]

In your opinion, which one would be the best choice and why: scarlet 8i6 or ssl2+ ? Love your channel! :)

[@NaidelPro]

Great video man, straight to the point, numbers don't lie👏👏👏👏👏

[@greenhologhost]

Great video. Which one do you recommend me to produce and mix Techno ? . I tried Motu M2, the sound is pretty clean , do you think SSL2 could be better than the Motu one . Thx I. Advance.

[@ut1004bp]

the Air button on the Scarlett seems clean but not amplified so didn't alter the sound quality a noticeable amount as the "4k" button sounded like a "loudness" was added, adding more bass and treble.. I'm more impressed with the subtle improvement of the Scarlett Air option, however the duel adjustable headphones is what I was attracted to and purchased the SSL-2+

[@niteboatermusic]

does anyone know if the SSL2+ is fully compatible with Apple's new M1 series machines running Big Sur?

[@IamtheActionman]

I had a Focusrite interface that broke down after 1 year. It was never moved or used outside of my studio. Won't be using their hardware anymore. For 50 more dollars I'll be purchasing the SSL 2. Thanks for sharing

[@leuca970]

I'm on your same boat man. My stereo headphone output started to give me problems with distorted audio just 1 weeks ago, and i've focusrite scarlett 2i2 3gen from april 2020, so it's just about 1 year and a half. I still have 3 years of warranty on Thomann but i'm moving on SSL2+. Did you find the sound quality better then the focusrite?

[@IamtheActionman]

@@leuca970 Hi Leuca, I ended up purchasing an AUDIENT ID4 with a Jfett input designed like an input on a tube amp. Crazy awesome when using VST3 amps.

[@cikguarsyad2127]

love your video. how about the audio latency comparison when recording?

[@domenicodalonzo9077]

Good question. I am also interested in this because I want to monitor electric guitar I am recording with plugins

[@bassyey]

Should be fine on both. I can get 0.7 ms on 32samples on old focusrite. SSL2+ and new focusrite 3rd gen should be better.

[@jacobsmith8848]

Has anyone tried comparing the focusrite Clarett to the SSL2+?? I’m curious to see what’s slightly better haha

[@JLGURECORDS]

Thxs.. and what about latency in SSL2+ vs. Scarlet ? Which one is better?

[@dustinrhodez6420]

Thanks for the video. Very helpful.

[@kettnercreative]

Glad it was helpful!

[@leslienambo9818]

Super helpful video!

[@kettnercreative]

Glad it was helpful!

[@paoong991]

hello. can you review Maonocaster ? can i use it as audio interface for recording vocals? Thanks man

[@tjmitch57]

My SSL2+ stopped working after a year and 1/2 started getting scratchy sounds on buttons after a year. Contacted solid state logic and they were less than helpful.

[@AlexJohn2us]

" Thank you for Sharing this Very thorough and helpful Video.....Good Job Well Done ! "

[@kettnercreative]

Glad it was helpful!

[@m.aydinkastal2129]

Thank you for goed information!

[@EricSpencer1]

I have a 2i2, but gawd, i just want the SSL!

[@ChrisBessy]

same ... today the SSL2+ is only 200 euros on amazon. I have a 2i2 today but the volume crash when i turn it .....

[@LearnWithTheBest]

Thank you for that great video, you have sold me on the SSL2+. I'm almost a complete noob to audio. My space is unfortunately not very acoustic and I cannot fix it for the time being at least. My setup is going to be an RE20 with the SSL2+ recording in a foamy isolation shield/ booth box type thing . My PC has very loud fans on it so I'm thinking about getting a dedicated mini PC from amazon for like $150 just for recording audio for my voice overs and then transferring the audio file onto my main PC and working with it there. Would recording on a mini PC with audacity and then transferring the file over to my main PC have any detrimental effects on my audio? As opposed to just directly recording on my main PC with the loud fans?

[@user-tx7gr7fg9b]

Russian User's advice to you - buy a motherboard with an integrated Intel processor, forget about noise forever, system performance and compatibility are at their best, mini computers - Bad Upgrade Option! (We understand this)

[@luhtreefa2214]

Ns1 waves plug in kills room noise

[@cbsmusic2745]

Please compare Ssl2+ vs Yamaha Ag06. And is Ssl2+ suitable with Windows and cubase? Does it run stable?

[@greggotoole1675]

Great comparison video. Ss2+!

[@kettnercreative]

Nice!

[@peacechannel1353]

Thanks, simple, understandable & shown with practical examples! If you happen to come across my comment, I've one question, I don't need RCA or Midi inputs, will it be ok to choose SSL2 instead?

[@kettnercreative]

Yes, exactly.

[@peacechannel1353]

@@kettnercreative Thanks Jordan, you're the best.

[@josepitaoficial]

Getting my SSL2+ rn!!

[@michaelihde]

Thumbs Up for the SSL ;) definitely gonna buy the SLL!

[@lousekoya1803]

Really helpful video,.....thanks

[@kettnercreative]

Glad it was helpful!

[@ZenMountain]

There's no "overthinking" with the meters. Just record the loudest possible before hitting red.

[@montikorbelle]

It's better to shoot for the range of -12dB to -6dB

[@toplisted8977]

I am buying my first audio interface for home studio. What could be the best option for me? SSL 2+ or Focusrite 4i4, or any other you know? Which one is more compatible for guitar recording in my MacBook Air 2015 8 gb ram? Thank you!

[@minisurfbanana]

@Nilly Sigger his Mac is 2015...no Thunderbird yet.

[@armandorojas7173]

Do you guys have a comparison between SSL2+ and Presonus ioStation24c?

[@sebastienleger1174]

Totally love my SSL 2... I had steinbergs, 2i2s, m-audio profire, cheap motu and rme fireface uc... and the SSL 2 totally compares to RME on the headphone amps and mic pres. Mic Pres are PLEASING on the SSL 2!!!!! Can't say enough good about SSL 2: My killer combo right now is SSL 2 + M-Audio Sputnik.. Heaven match

[@patriciomontero4458]

What kind of music do you do? I got only praise from a small Afro-Cuban producer from Latin America for the SSL 2. I have a UR44, do you think it is worth the investment in pre-amp quality? I remember I got surprisingly good recordings out of a UR22 with some very cheap ribbon mikes, that needed a ton-load of amplification, so I guess steinbergs are not that bad either.

[@patriciomontero4458]

On the other hand I never owned focusrite, but I have seen a lot of posts with complains from owners on just how noisy it is, and this video seems to confirm it, the hiss gets pretty loud as the preamp is set to 10 in the video.

[@jackiedragonfly2461]

I got the Focusrite, and I am hugely disapointed - the sound level (gain) gets lowered over 20 dB between what the Focusrite Driver shows, and what gets recorded in your DAW! Its horrible! Turns out it is a problem with Windows, especially Windows 11, and I have contacted Focusrite directly, and they have zero solutions other than to work in your DAW to artificially raise the gain (and so far I have found no way to get that done without distorting the sound). I will have to get a different interface.... Do any of you know if this happens with the SSL too?

[@brucebirch896]

Great comparison and makes the decision is a no-brainer. SSL2+ across the board. Worth the extra time to save the money.

[@22marx22]

I’m currently shopping for one of these. I’m a guitarist looking to up my game. I don’t know if the ssl2+ is too much gear for what I’m doing. Any thoughts out there?

[@bobjenks8642]

They are so similar, you aren’t going to notice a difference at all in sound. I would say the 2i2 is more user friendly though

[@spiderlab2526]

In oz you pay 30% extra for the SSL 2+

[@kettnercreative]

Sounds about right for how many extra features you get.

[@MrFree-vj8qj]

A comparison with the SSL and not SSL+ would be more fair price wise, they are the same anyway just less inputs. The gain difference is important if you use a dynamic mic like a SM7b etc it also had less noise.

[@Timelapse365]

7:01 "it goes up to 11" is a spinal tap reference. classic and very funny reference by solidstatelogic.

[@jerrydaminato743]

Bought the SSL2+...Excellent!

[@kettnercreative]

Good choice!

[@GP-mk5tj]

This this video has helped me a lot because I was going to go with Scarlett 2i2 but then the id4, and id14 sounded a little better but I didn't like the inputs. Behringer umc 202hd caught my eye, but I just don't feel it is up to date. I like the fact that the controls are showing like a floorboard of a guitar effects processor. I stayed away from the rack products because I don't like to do programming from the front panel. Thanks for your review.

[@kettnercreative]

Nice, glad it helped.

[@paulmunteanu2444]

Damn , i had the exact process as you haha. I ended up buying the SSL2+ ^_^

[@nym053]

I had ID14 as my first interface, but the adat didn't work so well and also had some other problems related to the driver. Then I tried UMC1820 with ada8200 and that worked out great. But kept thinking "behringer, behringer" it put down my confidence and had to check out comparisons and learned that the Scarlett is slightly better in sound. Back when I had to choose my first interface, ID14 was the better one over the Scarlett. So this didn't help my confidence. Then I threw away the idea of multitracking and decided to try the SSL 2+ after watching comparisons again 😂 the only thing that worries me is the output quality for processing audio. If I use the 2nd headphones out instead, will the quality then be better? 🤔

[@joseache]

Hermano una pregunta, para captar bombo, timbales, campanas, caja y platillo..🥁 Cual me recomiendas..? La SSL 2+? O la Scarlet 18i8? Gracias por leerme espero tu respuesta bendiciones 👋👋

[@greenhologhost]

Bro , el vídeo es en inglés , no te va a responder si le escribes en español .. yo me decantaría por la ssl2 ..

[@jeremyschiettekatte8026]

I have the ssl2 for a year and didn't get any Nice vocal/guitar records. The reading why is because the 48V Phantom power gives only 46.7 volt. My very old Yamaha ov1 gives 47.8 volt. I setup 2 rode m5 stereo. Both Nice net tot Each other and pointng to the 12th fret of the guitar. One mic to the Yamaha and the Yamaha conected in 'Line in' of the ssl2. The other mic went straight in 'mic in' of the ssl2 In this way i can recording with 2 mics wich one was powered 46.7v (SSL) and the other was powered 47.8v (Yamaha) And i could hear the difference. The mic with 47.8 volt sounded far more naturel.

[@darkskinwhite]

I saw someone with the 2+ sending sound from their laptop to the interface/through the preamps (& back into their laptop obviously) how can I do that and do I need the 2+ to do that or will they both do it? great video, thanks.

[@Vlacky.]

If your starting up fam , u don’t really need a preamp , just buy the ssl interface , and you can connected to ur computer via usb, and then connect a microphone through xlr onto the interface , and from there your good to go , just make sure to turn on the 48v phantom power to make the microphone work

[@churricardo1457]

I think he’s referring to routing digital instruments through the pre amp and sending them back to the computer

[@kcat80]

@@churricardo1457 yea, you would probably get a bit of benefit from doing that and 4k mode, it's gonna add a bit of mojo.

[@churricardo1457]

@@kcat80 right, but what would be the easiest way to do that?

[@LorneVignettes]

I like both devices better when you don't have the Air switch and the 4K witch engaged. The way I have my setup for live streaming is I have a Phonic Summit 16 channel digital mixer as my interface for my DAW so I can spice up my SM7b with some Slate Digital plugins and other processing then Instead of sending my control room left & right outputs to my monitor speakers. I send the left out into channel 1 and right out into channel 2 of my Focusrite Scarlett 2i2. then in my streaming software I choose the Focusrite 2i2 as the interface for outputting my stereo DAW signal to the world. The 2 interface setup for streaming if you have a DAW with plugins is the only way to go. Before I had my setup this way I tried forever using Voice-Meter to get my plugins to be heard by my audience. Whoever made Voice-Meter really did a bad job at making the app self explanatory. Either way I could never get my DAW to output to my streaming software with Voice-Meter. The only problem with Voice-Meter is that it just doesn't work. The 2 interface setup is the only way to go.

[@MichalMikulskiMM]

Thank you for showing the difference in the pre-amps. I like more the Scarlett as it’s more musical to me, has more bass and not hollow mids like the SSL2+. The specs isn’t everything. Must say though, the 4K did sound better than Air, I wish there was a Scarlett with 4K.

[@Juanvl143]

Can I use condenser mics and dynamic mics simultaneously with the 2i2? Phanton power wont affect the dynamic microphone?

[@kettnercreative]

For the vast majority of dynamic microphones, that is correct

[@radovanradovanovic2755]

Ssl 4K harm. dist. In low and lower mids and with the bosting around 8kh and dicret dot at the high top also boosted and dist. it ronds up the sound in to really nice US brodcast kind of flavor that we heard so often from back in the days in music, tv and movies. Listen to a singinc chorus on SSL with 4k. Scarlet by dist. slightely emphasise barely audible 40 up to 60Hz, also high fq, some mid high and it kind of harm dist. more of a mid range, but it also slightly brings the gain up, you can here it at 9 because the hf noise from 10 starts being audible when you turn the AIR on at 9 and saturation sounds like softube tube saturation. It sounds crispy and shimmery, prity nice also, it sounds like it opens up more tha ssl, but it's a trick, thats because it gains up slightly and it has more going on in mid and mid high.. bought are good. Watch the test with 500x AD conversion trough and back trough and you'll know why I like SSL.

[@kettnercreative]

Thanks for the comment.

[@ChrisBessy]

i have a scarlett 2i4 .... the volume knob creaks when i move it and the little headphone knob is also broken so sometimes i have no sound in the headphones. Only after about a year. Never again Focusrite for me ... My old M-audio was better. I want to test this SSL2 to last longer in time ....

[@kettnercreative]

Thanks for the comment. Sorry to hear of the issues that you've had!

[@bassyey]

No loopback on these units?

[@recordlabeldao7820]

i have both and they sound nice

[@dr.b.3179]

I love the SSL2+. If I buy Shure SM7B and SSL2+..do I need to buy Cloudlifter or not?

[@dr.b.3179]

By the way...thanks for your videos mate!

[@kettnercreative]

I don’t need a cloud lifter with the SSL2+ the way I speak. If you have an extremely soft voice you may want to test it out though

[@kc-ug6gu]

im also thinking the same

[@Vlacky.]

@@kc-ug6gu you guys don’t need the cloud lifter, ssl alreday has the 48 phantom power

[@veritas932]

@@Vlacky. SM7B is a dynamic mic. It doesn't need 48v phantom power

[@hongleyau7678]

Sorry, I am new to these things. May I know ssl2+ vs steinberg ur22c which one is better? Any suggestions for me?

[@kettnercreative]

SSL2+

[@michaelcahill5324]

Would there be any benefit connecting a external pre amp to either of these?

[@77Cardinal]

I've owned both and have used both with outboard mic pres for amplification + eq and compression/limiting.

[@garrysstuder310]

Thanks for the comparison! I will be purchasing the SSL2+.

[@kettnercreative]

Good choice!

[@garrysstuder310]

@@kettnercreative I enjoy your videos. With so many choices out there, you really cut through all the noise (pun intended), by hitting on each aspect of the equipment and why one would be better in a given scenario over the other. For me, It's a huge help!

[@spockboy]

Very informative. Subscribed.

[@Runaverse]

Gain range seems pretty comparable there. If you already have the 2i2, do you think that it’s going to make a huge difference if we get the ssl2+? I feel like with sound reduction software, you can get over the floor sound issue

[@luisvaldez6295]

I also have that doubt ,too

[@christophermonk4879]

No if you have a low end interface do not upgrade with another low end interface and expect to see drastic results. An Apollo twin or antelope zen would likely be the next step up. Take note that I love SSL and own a lot of their outboard gear. I also happen to like the SSL2+ quite a lot and it’s probably the best sounding interface in that price range.

[@10kucold23]

@@christophermonk4879 I have the scarlet solo it makes hiss noise from the volume gain , would it be good to get the ssl ?

[@Its2ru]

@@10kucold23same problem here

[@MylesJordan4]

“This one goes to 11”. That’s a This Is Spinal Tap” reference - which makes the SSL2 that much cooler. 😂

[@eliteextremophile8895]

So the SSL has much lower noise floor with maximum gain and the 4K sounds great. Probably not for talking, but I could see myself using it with some instruments and especially singing. For me I think it's worth the extra 100€ (where I live). btw, It goes up to 11 because it's one louder. Edit: I was almost going to buy this device, but then I stumbled upon Black Lion Audio Revolution 2x2 and even though it's over 400€ I had to stop myself from purchasing SSL2+. I looked up every imaginable comparison I was able to find and goddamn it blows pretty much everything away. It skips the RME and Apogee price range and goes straight up to Chandler and AMS level in terms of pre-amp and has the same quality DAC as RME and Apogee etc. Only downside is the 6ms round trip latency at 32 samples, but I can't see it affecting my playing or singing. The pre's demolish everything under 1500€.

[@MrFree-vj8qj]

no, the things you listed are subjective they dont make a difference in the real world. people believing in "better sound" is silly nowadays, this isnt 1940, better sound is not better, its just boring.

[@LiamDarden]

Hey i'm interested in getting the black lion for recording guitar and vocals. I only have a 2i2 3rd gen right now, and I am curious if an upgrade would bring my audio quality to the next level. Was it worth it for you?

[@ldrdatribeoflife5072]

Does the SSL2 work good with the windows 10 update cause my Focusrite seem to don't work

[@Blackstamos]

i had the same issue. Try reddit if you can't find the answer.

[@davidronchetti3244]

Honestly, the difference in specs is negligible, and in most circumstances inaudible. Was there more noticable noise on the 2i2 when it was turned up? Not to my ears. And a fairer comparison build-wise would have been the SSL 2 (not the 2+), with the 2i2, as that also only has one headphone out and no midi in/out, and is also more similar price-wise. However - it does come down to sound. The 2i2 just sounds a bit brighter in my opinion. There's a bit more body to the sound on the SSL - so fair enough - slightly better pre-amps. But the added "analogue" texture buttons on both? I don't think they are really game changers given both units offer a very clean, noise free sound with plenty of gain from their mic inputs. I think the SSL is marketing itself as a standalone unit that sits well in a working studio full of equipment; the focusrite is almost half the size and weight - so is much more portable. This comparison didn't really take into account those factors.

[@manlyscents]

The SSL2 has about 6db gain more, which makes a big difference for those using low sensitivity mics.

[@kcat80]

11? reference to this is spinal tap?

[@OfficialFatLip]

I expected more from the SLL, especially for that price and the fact their own signature plugs which come with sapphires do have a grind

[@kettnercreative]

More gain, less noise, midi, blend knob, good monitoring options, two sets of headphone jacks. To me, it seems pretty complete at this price.

[@darkskinwhite]

not to mention it comes with a bunch of free software (good shit not bullshit) and its SSL sound in an interface, I really dont see where you could be coming from, this thing is way underpriced

[@OfficialFatLip]

@@darkskinwhite the SSL comes with focusrite plugs? is there any way of using them with out a interface??

[@asidtone6465]

The Focusrite preamps sound better to me

[@quinnolivarez]

Great review, ordering this as soon as I need it

[@quinnolivarez]

The SSL2+** 😂

[@michelbirnbacher]

Hello - thank you!!! I produce „only“ a podcast and do online teaching - using a SM7B. My company does not allow to install software on my Windows Laptop - can I use the SSL2 (no + just 1 microphone) without any additional software eg for ZOOM or MS Teams??? Got podcast I hav a macBook Thank you - Greetings from Germany

[@ferruizmusico8126]

Does the ssl works with Mac m1?

[@expriestxiety1042]

does audio interface or expensive mic matter tag me

[@willpannn]

How about the output to the headphone? Is it loud enough to hear our own vocal?

[@kettnercreative]

Both have very strong headphone amps.

[@John-Perry]

@@kettnercreative I disagree, the Focusrite has trouble pushing my DT770 Pro 80ohm cans, to the point it's basically unusable for headphone monitoring.

[@omfgihopethisworks]

@@John-Perry Thats bad, a good quality audio interface should be able to drive 80ohm headphones without any issue. So far in this low-mid price range, Audient iD14 has one of the highest heaphone amp outputs.

[@TheLithGH]

Thanks!

[@Brynwall]

Has anybody tried to use a USB-C cable around 15' long with the SSL 2+? It works for a second and doesn't have enough power to keep my beyerdynamic DT 770 PRO 250 Ohm headphones working... I'm considering using a powered USB-C cable or a powered hub. Any idea if this will work correctly?

[@kettnercreative]

The longest that I've tried is 2m.

[@Brynwall]

@@kettnercreative the powered USB c cable works great!

[@kc-ug6gu]

yes i want to buy ssl2 + sm7b

[@kettnercreative]

Nice combo!

[@kc-ug6gu]

@@kettnercreative can i use ssl2 + sm7b + se dm1 all togther?

[@gaborkiss1425]

@@kc-ug6gu My question exactly! SE DM1 looks like a fine gear!

[@JhadaiMcDonald]

So I wouldn’t need a cloud lifter with the ssl?

[@kettnercreative]

Not unless you're very soft spoken.

[@EdersondaSilvaNascimento]

Muito bom o vídeo mas você foi imparcial do começo ao fim. Porque não comparou a SSL 2 plus com a Focusrite 2i4? Ela tem as mesmas saídas na parte de trás! Não nego que a SSL seja melhor, claro, ela é mais nova. Foi lançada agora. Se quisesse ganhar mercado teria mesmo que vir com um diferencial competitivo. translated by google The video was very good but you were impartial from start to finish. Why not compare SSL 2 plus with Focusrite 2i4? It has the same exits at the back! I do not deny that SSL is better, of course, it is newer. It was launched now. If I wanted to win the market, I would have to come with a competitive advantage.

[@ivyriley2916]

SSL2+ does sound better,, and more quit when turn up,,

[@kettnercreative]

Most definitely. It's a substantial difference. More gain, less noise, better sounding preamp.

[@henrikpersson4698]

Does the 4k switch work on line level signals as well?

[@chkorn86]

Yes it does

[@henrikpersson4698]

@@chkorn86 thx

[@cohoonatube]

Thanks for the comparison! SSL has the more musical sonic lift to my ears.

[@kettnercreative]

You bet!

[@matthewdeward1984]

love both and own both the scarlet solo 2nd gen (great bundled software and 'Isa' colored preamp called Air. similar to the 43k button however that 4k button is a hot one, I would NEVER suggest recording all tracks with the 4k. I dig the scarlett 4i4, 3rd gen,- I had bought that while I was waiting on my SSL 2 plus ( and went modular in the process? thats where my money went?) lol Great interfaces the SSL has some rediculously awesome stats. I am Running the Mackie profx12V3 into the SSL./focus rite. I dig the Nuetrik Connectors, all my cables are Nuetrik, or Moghami

[@kettnercreative]

Sounds like you have a great setup.

[@parasolaudio4621]

Are you running windows 10?

[@matthewdeward1984]

@@parasolaudio4621 Yeah id love to run mac, but for now windows

[@matthewdeward1984]

@@kettnercreative hey thanks for response yeah its not bad, I have an SLMK3 running into a bunch of synths ( Pro One, A behringer TD3(303 clone), a Cat, Crave, Minilogue, and Finally the star of the show the Tr8, with the 7x7 package i think the Tr8 Aria will faaaar surpass the Tr8s, The Tr08 boutique, and obviously the Giant 3,000$ original 808. but with the Aria 7X7 one gets not only the standard 909 and 808s, that it comes with but 606, 505, 707, 727, and extra Drums for the 808 sets Very worth the 150$. Anyway what impresses me about the SLMK3 by Novation is that it is standalone, needs to PC and I can Record * channels of Midi directly into its sequencer and then On the Fly- control up to 32 synths- including ALL PARAMTERS and it gives 8 lanes of automation which is cool. Yeah I picked up the Modular rig on accident Kind of. I was gonna get the RD6 to Match my Td3, and of course Behringer has people on hold, STILL ( I have built an entire modular box, without one single company complaining or putting me on hold... just saying) might be why there prices are nose diving. But yeah the Tr8 is back up around 450 at sweetwater again from 300$( thats what i bought it at). any who so yeah I press this Button on my Keyboard called ''In control'' and Novation was the first and dedicated Mapped Keyboard made for Ableton. so after one presses that button, one can either flesh out what one was doing externally or go all Daw.... They updated the firmware recently to include eight seperate arpegiators., Each channel has 8 'lanes' of automation. bigger than the keystep however wayyyyyyyyy more usefull. Having dedicated CV outs helps aswell./ however that all being said thankyou sir i watch many of your videos and resonate with much of what you say, and hey many of the things about my PROFX12V3 You taught me so double thanks

[@_Trakman]

not to be too nit picky, but u could've had that mic stand extended up higher / gotten the mic a bit closer to your mouth. some people almost deep throat that SM7B, and the proximity effect adds more volume and a muscular deep bass but on the other hand you have quite a loud voice, so... take my comment with a grain of salt!

[@kettnercreative]

Tough call. People seem to complain about the proximity in a bunch of my videos wether it's close or far. With my latest videos, I try to stay a fist away to represent a middle ground. It's impossible to try and demonstrate it to everyone while making them happy.

[@Jota.Barrakero]

I ve the 2i2 2nd gen,and the ssl2+,ladt one cant power enought shure sm 58it sound clearly but wirh less volume ,4k button doesn do enought,i saw reviews and bought it,but.... Im quite dissapointed.....dont know if with a pream shuld change but..,the latency is about 12-13 ms right now,with 512 Samples,ive to test right,because i dont remember the samples rate i had in focussrite but it seems very similar latency,let me get in studio and test right

[@kettnercreative]

Something seems wrong with your setup. A SSL2+ or Scarlett 2i2 can both EASILY power a sm58.

[@roses7576]

did you install the right drivers? makes no sense that you cant make this work

[@Jota.Barrakero]

@@roses7576 yes! I change the wire, jack connection to xlr,it sound more loud....but with gain at 3 o clock,till nine or ten it dont light the scale.i have to do more tests

[@Jota.Barrakero]

@@kettnercreative mmm i was thinking but i have no setup! Im on win,a sm58 trought xlr input,a ssl to usb pc,and a akg k712 to phones input that cant handle,i hear an akg k712 trhu a rme fireface 800 and its sound clearly better and more hight...

[@jpgo5]

Hell yeah. 11!

[@oooooooo4963]

thanks !

[@kettnercreative]

You're welcome

[@PerfectMessProductions]

Ssl2+ vs behringer umc404

[@RodneyD]

to be honest... Its a no brainer to choose the SSL

[@kettnercreative]

100%

[@Brynwall]

Sorry - I keep finding your videos for the recommendations on your other vids. haha What are your thoughts on the 4i4? Also, if I wanted something with more control like the Yamaha MG10XU that also has MIDI, do you have any suggestions?

[@kettnercreative]

To be honest, I've never used the 4i4. If you like the Yamaha MG10xu, why not just get a purpose built midi interface? Is there a benefit to having it all in one?

[@Brynwall]

@@kettnercreative not sure. Haha I'm just learning as I go. :)

[@Brynwall]

@@kettnercreative So... I ended up finding a used MG16XU for $286 that seems to be in brand new condition! Now I just need to learn all of the extra options... haha!

[@fedboy21]

Whats the rca in out on ssl 2+ for?? Is it same as spdif?? And wich one is good for guitar tracking??

[@kettnercreative]

They will both work well for guitar tracking since they can both handle the impedance of an electric guitar being plugged straight in. But I prefer the SSL2+ The RCA outputs (no inputs) can either run to RCA monitors in your studio or to something like a DJ mixer or audio mixer if you're playing backtracks from a DAW for a live performance.

[@csdarlington86]

I haven't even watched the video yet but already know the SSL is superior.