Food fight thin laminate and side art install

[@moviehunter2020]

He’s Back ! The Godfather of Arcades has returned ! 👍😁👍

[@KenColangelo]

So glad to see you back making videos! This reminds me of my old restoration days. I've got a few interesting projects on hold that will end up sucking me back into the hobby...multi Williams and multi Gottlieb/Mylstar, both with new custom cabinet designs and original controllers. Gonna use that thin vertical laminate. 👍🏻

[@WayneSylv]

Great to see a new video from you been going through an arcade Jason withdrawal I’ve been rewatching the old one lately lol

[@jeffm9482]

Always enjoy watch you and your wife work on games. Hope you all are well and look forward to the next one.

[@OriginalSithMonkey]

Wood dowels are your friend when setting laminate in place. Glue won't stick to the dowels. I also use a laminate roller just for extra insurance that everything is well contacted together.

[@properjob2311]

nice to see you back Jason - you bought a house just for your arcade machines? now that is dedication to the hobby :)

[@soupcan85w72]

Thanks so much for the video Jason keep them coming would love to see an arcade walk through again

[@garogercade7850]

Great to see a video from you again!!!

[@carlperkins1452]

Looks the balls Jason. Thanks for the video!

[@kcase601]

Arcade Jason First off glad you are making videos again. I have been working with PC Woody lately and love the stuff. It hardens up so much you can drill into it. I would call it instawood. Can't tell the difference between the wood and the PC Woody product.

[@tigheklory]

Fun video Jason! You have to take it slow with the flush cut bit. I use standard Formica (counter top grade) and you don't see it once the t-molding is on. Using the (vertical grade) is fine too, just not a durable. You need to get a J-roller for applying vinyl, and it's way easier to apply if you have the cabinet standing up vs laying it down. Put the laminate on laying it down, but the art do it vertically. Tape it in place about 3/4 the way up with painter's tape then let the top hang down at the tape line. Then cut the backing just above the tape line then slowly pull the backing off while rolling the vinyl until you have it all the way up. Then do the same to the bottom 3/4 of the art working your way down, letting the rolled up backing to keep the art away from the cabinet as you use the j roller. This old game has a nice video on this method. Also I am suprised that the art doesn't have a mask layer protecting it before applying. Where did you get it? Lastly any bubbles you cannot work out with the j roller you can use a pin or the tip of a exacto knife to just barely puncuture and then when you roll the j roller over it the air will come out the tiny hole that you will never see.

[@CusiArcade]

Great to have you back

[@MylstarElectronics]

Back at it again from the dead!!

[@Aaaaaaasteroids]

It’s crazy that no one will reproduce the stripe shirt art for food fight.

[@operationrestore3308]

Holy shit the man has spoken!

[@operationrestore3308]

I see you found your motivation brother.

[@joesmoe71]

HE LIVES!

[@azariayehezkel9064]

Jason. Welcome back ❤ I thought you dead

[@greenmedina5255]

There is a local arcade near my home town that had food fight in it’s collection for many years. I always wanted to play, but that sucker stole my quarter every damn time. That five year old kid in me still wishes I can find a working console to play. Yeah, I know there are emulators, but it’s not the same.

[@THeSToBBSTeR]

Genius, buy another house to put games when you run out of room in the home arcade! You Rock!.

[@AndrewAHayes]

Would a heat gun make the vinyl artwork easier to remove?

[@ArcadeJason]

yes sometimes but on occasion it will make the art stick more

[@djmips]

You can buy an OK lavalier microphone (External) for around $20 going up and you can get a wireless version for $40. Would that help instead of buying a new camera?

[@Okurkaarrgghh]

When you collect so much you have to buy a second house.

[@Alaskanzen]

Finally tail gunner 2 resolution :)

[@ArcadeJason]

the final tail gunner series was finished 2 years ago kzbin.info/www/bejne/rpzVfmelgMl8otE

[@josephlalock8378]

fuckin a. nice to see you back jason!

[@therealsupergenius]

YASSSSSSSSSSESS!!

[@OriginalSithMonkey]

Links aren't working

[@ArcadeJason]

thanks will look into it

[@djmips]

I think this is one (Troy's Restorations) www.youtube.com/@troylukans2174

[@djmips]

And the other (Sam's Arcade Fix) www.youtube.com/@SamsArcadeFix