Did one of these back in October. Followed service information to the letter. It was leaking oil again. Turns out that you do need to put some RTV on that mating surface. Service information does not tell you too, but do it anyway. It's a learning experience for sure.
@BLUECOLLARGARAGE11 күн бұрын
Yep you’ll want to use some where the can cap comes together.
@joanrusling5397 Жыл бұрын
Good camera work including speeding up the wrench turnin' work! Thank you😊
@Fredrik_ST_wagon Жыл бұрын
Dude! So happy i found your video, i have exactly this problem on my Mk3 ST wagon, and i couldn't for the life of me figure out what it was. and i think i'll even manage to fix it my self, with the help of your video. :D
@lglstar10 ай бұрын
Great video, thank you for your help on this. Like everyone else has mentioned great camera angles and lighting. Thanks
@YanickT3 ай бұрын
It was exactly my problem. But on my side the Pump has jammed and the Camshaft Pump Drive Coupling bolt has broke. I replace the pump and the coupling screw. It Was very fun to remove :) Your video help me thank you.
@fazeone365810 ай бұрын
This is EXACTLY what I was looking for!
@fazeone365810 ай бұрын
My 13 Fusion Titanium 2.0 has been leaking from there for some time.... im fiiiiiiiiinally getting around to fixing it!
@MWaV300Ай бұрын
Thank you great video!
@PeterMaenke8 ай бұрын
Good simple walkthrough. Thanks man.
@marklong670122 күн бұрын
Hi when these vacuum pumps fail do they cause a loud whining noise and loss of boost when driving and accelerating hard
@ChrisKHa7157 ай бұрын
Great video!!👍👍One question: Must you bleed the brake or something else because you opened the vacuum system?
@BLUECOLLARGARAGE7 ай бұрын
Nope it’s just plug and play
@ChrisKHa7157 ай бұрын
@@BLUECOLLARGARAGE Thanks man ❤
@NickVasile3 ай бұрын
Same part fitted in 2013 Volvo S60 T5 with turbo 4 cylinder 2.0 (B4204T7 engines) Identical part.
@BLUECOLLARGARAGE3 ай бұрын
Thanks for the info.
@justindubreville3066 Жыл бұрын
That clip you removed on the top of the vacuum pump that connects the vacuum lines from the boost controller and the brake boost line. What is that clip called and what is the part #? Thank you! Great video by the way, wish more people made videos like this
@BLUECOLLARGARAGE Жыл бұрын
Unfortunately you have to buy the whole vacuum line assembly and not just the clip. www.tascaparts.com/oem-parts/ford-vacuum-line-cj5z9961b?origin=pla&gclid=Cj0KCQjwib2mBhDWARIsAPZUn_lzGg6Wj7T1Mt5x24kduTocf7n_DO5ZPShqYJODQbsZsBdHY4jpli8aAmLKEALw_wcB
@justindubreville3066 Жыл бұрын
@@BLUECOLLARGARAGE thank you so much. Broke mine yesterday putting new charge piping on and adjusting my EWG. Glad I can get it fixed
@brassmule7 ай бұрын
1:50 - Denso stickers on those ignition coils. I didn't know Denso was the OE provider for Ford for those - are those original or replacements?
@BLUECOLLARGARAGE7 ай бұрын
They are replacements but are actually motorcrafts rebranded as denso’s I actually go over that in this video if your interested kzbin.info/www/bejne/f3bGgK18eZdgj5Ysi=2pJLXhVKGmNjd5ze
@BLUECOLLARGARAGE7 ай бұрын
They are actually motorcrafts relabeled as denso’s I go over that in this video if your interested kzbin.info/www/bejne/f3bGgK18eZdgj5Ysi=2pJLXhVKGmNjd5ze
@brassmule7 ай бұрын
@@BLUECOLLARGARAGEThanks for that info! It's nice when you buy "aftermarket" stuff and discover it's really just the de-branded OE part. I knew Denso made parts for several manufacturers but I didn't expect it from Ford! Especially surprised by the Made in USA on a Denso box! The ones I've purchased for Honda and Toyota were all made in Japan. I'll have to research where in the US Denso might be making stuff. Thanks for the follow up!
@Scottb927685 ай бұрын
What if that big boat broke off as when you pulled the pump off the boat was laying down when I pulled it off what do I got to do to fix it
@Sfk8879 ай бұрын
What are the syptoms of a bad brake vaccum pump? Having some intermitten issues with our Lincoln nautilus the front rt cailper is heating up and smoking sometimes.. Checked the Calipar and brake line are good.. Mechanic says it's ABS, haven't taken to dealer yet but dealer says they can reprogram abs or replace abs unit. I stumbled onto this brake vaccum pump didn't know it existed.
@dielog22116 ай бұрын
probably excessive brake from over 160km/h can a good vibrations? not sure but i had it suddenly i wonder if I could change it? cuz mine is leaking so badly...
@ressybastien6002 Жыл бұрын
What was the symptoms? May this cause shuddering on hard acceleration
@dielog22116 ай бұрын
can i just use evoque L538 vacuum pump?
@JustinCarter Жыл бұрын
The seal link doesn't work but may have to try replacing this myself. Ford wants $400!
@pmccoy8924 Жыл бұрын
Really? My 13 Fusion is at the stealer right now. They want $734.40 because the seal is bad and it's leaking oil. Literally stealing from people. 2 bolts and the intake. They make it sound like the front clip comes off.