Ford 3.5L Water Pump and timing chain install.

[@Nards_1997]

Awesome design. Im doing a 3.6 subaru

[@thumbprintgraphic]

Awesome

[@PrisonCitySam]

How did u build oil nd fuel pressure if u don't mind explaining

[@gabrielreesemobilemechanic]

For fuel pressure, I just wanted to fill the rails so I cycled the keys a few times and left it in the on position for ten seconds… Otherwise oil pressure happens when you crank it, then that oil pressure should jump right up when you first start it

[@bernie472]

Just did my Explorer. I left the oil drain plug off the entire time, so any engine cleaner I used, and the coolant from the water pump that got into the oil pan would drain out of through the hole where the drain plug was.

[@gabrielreesemobilemechanic]

That’s a great idea! I didn’t think of that. I just did an oil change at the end of the job. Don’t forget to put the plug back in before you add new oil lol

[@hayguey7952]

Why not do head gasket if u was already the far into the engine

[@gabrielreesemobilemechanic]

That’s way more work, to take off the cylinder heads

[@juanlanda2441]

Always hated ohc timing chains ever since the 4.6 . Fords suck. Always make sure you can replace the starter, water pump and spark plugs easily before purchasing any vehicle . And then the transmissions arent the greatest either