Ford 3600 tractor fluid change

[@camperjack2620]

I just got a 3600 with a loader on it. Makes maintenance a little tougher.. If you keep it outside, keep a bucket on the shift levers to help keep out rainwater, and a metal pai; of paint can on the exhaust as the flappers leak. I found a ROPS in a tractor boneyard. These were great tractors, but the older machines need a lot of TLC to bring them back. Many are kind of neglected.

[@sandipkumarkumar6572]

Good

[@cspfitch]

Thank you for this video! Great job.

[@howification]

Thanks for doing this video! Ive looked for something like this for a while

[@homestead_dreamers]

Glad it was helpful!

[@jamiersandy]

Thank you

[@alezdralic730]

which oil is poured into the hydraulics, please help

[@harrellsservice5110]

Where did you find Square fenders for that tractor. I love the square fenders. Mine has the half round ones and I'd like to change them

[@satishmulge8918]

❤

[@steffenmidje1182]

where can I find the plug under the tractor when I have to change the hydraulic oil in the rear axle?? 😊

[@jacedavis6908]

My 1970 3600 has two fuel filters

[@JoseAlberto-yr6ni]

Good morning. I have a tractor like that: an old Ford 3600, which still works. It belonged to my late father-in-law. I really needed your help to review it. Because I need to change the engine and hydraulic oil, but I don't know what type of oil it takes and how many liters are needed for the engine and hydraulic/differential?! Can anyone help me? Thanks.

[@akashminhas8955]

Hi there I have a ford 3600 and the hydraulic lift ain’t going up and down? Could this be due to low hydraulic oil???

[@homestead_dreamers]

Either is possible. Easiest thing to do is check your fluid level.

[@kulwinder3600]

My ford 3600 ,47 hp,,you ?

[@jamiersandy]

My 3600 all of suddenly very slowly builds pressure and takes off slowly. My fluid is foamy. Is this most likely the cause?

[@homestead_dreamers]

Foamy fluid can be a reaction not a cause. Change the fluid and refill to the proper level. Overfilling can cause foaming. Moving parts can stir the fluid up and aerate it.

[@satishmulge8918]

Satish ripeyarsatat tofarma😊

[@akashminhas8955]

Or could something be wrong with the hydraulic pump?

[@homestead_dreamers]

Pull the square headed plug on the right side towards the rear as in the video. Remove the fill plug behind the seat. Fill until fluid comes out the first hole.

[@akashminhas8955]

@@homestead_dreamers thanks for the response, and also what hydraulic oil should I use, correct me if I’m wrong but isn’t it 10w-30?

[@homestead_dreamers]

Tractor hydraulic fluid

[@akashminhas8955]

@@homestead_dreamers thxs ur a life save 🙏

[@akashminhas8955]

@@homestead_dreamers can u make a video of where the rear drains are😊

[@SteveDodsonatDodsonOrchards]

10 gallons?! Or did you mean 10 quarts?

[@homestead_dreamers]

Gallons