Great guide man. I've been working on my dad's old truck and learning as I go. Your video made this so much easier than the first attempt. Thank you
@eddominates3 жыл бұрын
you got yourself a sub my friend. Thanks for posting this, really informative and helpful. Takes some of the terror out of servicing an A/T to be able to watch you do it first. My shifter seals are leaking and the filter needs changed, I was dreading it but now I feel like it'll be no problem.
@Spideyjb Жыл бұрын
gained a sub. thank you. i got a 70' f250 with a 460 and c6 transmission. perfect channel for me. thanks again
@kevindossilva55862 жыл бұрын
AGREE WITH EVERYONE ELSE THAT YOU DID AN EXCELLENT JOB WITH EXPLAINING HOW TO DO THIS.THANK YOU
@rdd014r4 жыл бұрын
Just did my trans using your guide. Thanks for posting.
@charlielong2627 ай бұрын
Thanks for this explanation! Particularly the section on how to get the park pawl back into place and then how to get the kickdown lever seated properly in the valve body.
@Lost_in_a_Lexus4 жыл бұрын
Thanks for posting this video. Watched this video while drinking my morning coffee then tackled doing the seals on my 1972 C6 that've been slowly leaking for years.
@robertclymer69483 жыл бұрын
Thank you for a very good detailed video! I am only replacing the inside filter and putting on a new lube locker gasket. Not draining the torgue converter of the two qts of approx fluid so looking at like 8 qts after start up/warmup of fluid, will top off if needed. Don't forget, the C-6 uses "F" type. Thanks again for sharing. Cheers from Motown.
@bentleynut16483 жыл бұрын
Very very helpful. Thanks for doing such an incredibly clear video. Really great.well done
@rowycoracing3 жыл бұрын
I just did the seals on my C6. Thanks for posting the info. Much appreciated!
@raymanning10642 жыл бұрын
Great explanation showing how to. Much appreciated.
@Iamjohniwanna4 жыл бұрын
Really helpful. Thank you for showing all the details. I feel much more confident about tackling this job.
@artm55834 жыл бұрын
Thank you for your time and effort. Amazing video showing all the steps. I’m going to try this my self
@Nolley218 ай бұрын
I felt that "aww whatever" when you saw the pan LOL
@richardmason8044 Жыл бұрын
I know you’re doing a C6, but I,ve got a C4 and I was wondering if the rear output shaft at the Governor is supposed to have movement. Thanks
@thmain12532 жыл бұрын
Super the best video ever. Awesome! Thanks.
@ST-gp8jh4 жыл бұрын
Not bad for one hand holding a camera! I'm going to be changing out seals in my 1970 F100/C6 in a couple weeks and was looking for some good reference. I'm tired of cleaning drip pans. Thanks!
@tobiasheilig79143 жыл бұрын
Thanks for the video. It was a good help.
@TweezerAddict2 жыл бұрын
I subscribed for the bird.
@ooCHICOoo2 жыл бұрын
thank you for sharing my friend
@latamorewilliams6443 Жыл бұрын
Did you have to reset it after you rebuilt it? Is that hard?
@thomasculp34143 жыл бұрын
Nice job. Very helpful
@driftfly12 жыл бұрын
Great video thank you
@dalelester96203 жыл бұрын
am i seeing a crack in the case ? 7:15 /7:22 top left of video
@ramonvillasmil9090 Жыл бұрын
Mi caja falda un poco para canbial que me recomienda que puedecer
@MrAirsoftKid9811 ай бұрын
What do you do if one of the arms move?
@hmdwn4 ай бұрын
All that, and then guessing on the 'band' torque adjustment👎 And should toss a magnet in the bottom of the pan.
@andrewgarcia27984 жыл бұрын
I have a question about my piston placement on my filter mine seems to go more forward to the front of the truck than yours does it matter
@Rhomka3 жыл бұрын
Hello, what kind of liquid are you using to refill ? Lot of different type/brands... Thanks in advance
@kirtrajen23173 жыл бұрын
Mine takes only Type F
@ericlyons115 жыл бұрын
Great video, very helpful. Is there a seal for the filler tube? If so do you know how to replace that?
@ericlyons115 жыл бұрын
Also, do you have a link on ebay of the gasket kit you bought? Thanks.
@michaelknight28973 жыл бұрын
What should the transmission be in when you do this, neutral, park? Are the bolts holes marked for long or short, or do you simply have to keep track?
@smathet77662 жыл бұрын
Put it park. Take a picture of it is before you take it apart as reference.
@MichaelJohnson-fi3kj3 жыл бұрын
Damn great video!
@howardlovecraft7502 жыл бұрын
Where was the solenoid located?
@rigodiaz012 жыл бұрын
27:49 🤣🤣🤣 Great Video!
@xtremecouture69693 жыл бұрын
You wouldn't by chance have a link to wear you bought that seal kit would you? By the way thanks for the video 👍
@simplytk52513 жыл бұрын
I need that too. Most places don't seem to have or even know what I'm talking about.
@kirtrajen23173 жыл бұрын
Bought mine off eBay, says for all c6 transmissions
@SBellew753 жыл бұрын
At 21:21, I was expecting any second something to latch onto your finger.
@559truckin3 жыл бұрын
I forgot to put gasket sealant leaked all the fluid out
@allenbermea90155 жыл бұрын
Part #??
@allenbermea90154 жыл бұрын
No shit boss
@allenbermea90154 жыл бұрын
Already did it
@Louis-kk3to10 ай бұрын
That stupid seal ,,,just yse the 7 / 8 wrench as a pry tool viola 😀
@michaelevans14953 жыл бұрын
lol I’ll I pop up I ipzoooopoop pop out pop play with you p