These videos have been great. You caused me to take my sons 2017 Escape with 52k miles and 1 week left of warranty to the dealership with a misfire in cylinder 2 to get it checked for coolant entry. Sure enough it had this problem. Saved me about $6K. Without this video,I would have just changed the plugs myself and probably got out of warranty.
@dawidmarczak77338 ай бұрын
Kolega gdzie kupić nowy blok na eBay diler za drogo?????pomuc mi
@jsjizzaone35903 жыл бұрын
Awesome vid cant wait for the next video and u know u getting thumbs up ova hear!!!!!!! Have a blessed night and keep pumpin them vids out!!!
@FordBossMe3 жыл бұрын
yes indeed, lots of info to share
@cheeseo97988 ай бұрын
Seemed a bit excessive on the oil pan rtv😂, I use the brown scotch bright pads to clean and make a light rough surface for siliconed areas.
@VitaliyKofman3 жыл бұрын
I see you got a new camera guy :)
@FordBossMe3 жыл бұрын
only for a minute
@niallcosgrove55962 жыл бұрын
All that RTV on the sump, will end up on the in side of it.
@FordBossMe2 жыл бұрын
No it wont
@FordBossMe2 жыл бұрын
Silly comment
@niallcosgrove55962 жыл бұрын
@@FordBossMe Maybe in your opinion. They are two perfectly machined surfaces therefore you don’t need 10mm bead of RTV. What do think will happen when you bolt it all down🤔 it’s gonna go some where.
@mph5896 Жыл бұрын
That's about triple the amount of sealer than I use.
@adriannewman13222 жыл бұрын
I use grey silicone on everything that requires silicone. I think it seals better
@papotv852 жыл бұрын
Great video thanks.
@cheesecurd100s3 жыл бұрын
Thanks for putting these videos out. Just about to start this project myself. A little less daunting now
@BarberAutomotive2 жыл бұрын
how often do you replace the flexplate? I know it says inspect but was just wondering how often you find cracks in those flexplates
@FordBossMe2 жыл бұрын
Doing the short block I have never found one cracked but they have come in on their own cracked
@JensKirch763 жыл бұрын
Awesome. I am wondering if there is a serial number on each block and a naming that indicates the revision level of the block different to that in the car papers. I am guessing this Info goes into the car history/Ford System Information related to the car?
@FordBossMe3 жыл бұрын
Yes 100% annotated in the car's history
@FordBossMe3 жыл бұрын
I also noted on this block For some reason The Pistons all had 112 stamped on them And so did the block outside never seen that before And it was the updated revision plus the tops of the Pistons actually had a picture that you could take of the URL code
@ivorwm22912 жыл бұрын
Thank you
@adiwilson422 жыл бұрын
So would you have this engine in a car of your choice. As they are called ford focus in the UK
@FordBossMe2 жыл бұрын
No I don't like this engine
@wyattscheiber7196 Жыл бұрын
I have a few questions and I love the series on the 1.5L.if you have time could I pick your brain
@FordBossMe Жыл бұрын
The questions that you have have probably already been answered amongst all the videos that I have so I don't mind you asking me questions but I really want you to do your homework because my time is very valuable in a lot of people really have been asking me questions and it's been taken up a lot of my personal time Poissorichard.rp@gmail.com
@TommyG118143 жыл бұрын
Good stuff.
@dustin90353 жыл бұрын
How about some 3rd gen 5.0 vids. Do you have enough enough work on those for a video?
@FordBossMe3 жыл бұрын
I haven't had one of them in a long time, the last time I really had anything to do with one of them it was a stuck intake runner manifold butterfly It broke off in the vacuum actuator in the back Or like a bad throttle body, really nothing that we find that goes wrong with them
@dustin90353 жыл бұрын
@@FordBossMe Good to know, thanks
@rpaulpate3 жыл бұрын
What a job! And documenting it as well.... not easy.
@FordBossMe3 жыл бұрын
yeah, I wanted to get this out of the way so I can focus on these jobs from now on 100% without videoing
@autosalvage Жыл бұрын
Need to talk to u about this subject on 1.5
@Apollo-bw3hv3 жыл бұрын
Great info! 👍🏻
@FordBossMe3 жыл бұрын
thank you
@obeysamurai92143 жыл бұрын
Are you able to beat warranty time?
@FordBossMe3 жыл бұрын
Ummm not answering that here lol
@colemoody45763 жыл бұрын
can you do a video on timing the 2019 1.5 ecoboost or a diagram
@FordBossMe3 жыл бұрын
I have one in a previous video
@FordBossMe3 жыл бұрын
I'll do another one just on timing
@FordBossMe3 жыл бұрын
Here's a video I just did on the tools that you'll need in a link to the Amazon kit that has everything in it I'll have to get another 1.5 L EcoBoost my stall before I obviously do the Hands-On part