For the record, there will not really be a sound difference between the OE Diverter Valve and TS-0223-1296 (Plumb Back) because the Plumb Back also recirculates 100% of the air. If you are wanting a blow off noise then you want part number TS-0223-1096 which is a Dual Port. It recirculates 50% of the air and the other 50% is vented to the atmosphere. The performance benefit of this valve is that it seals better than the OE. This means quicker spool resulting in a small power pickup in the low to mid end power range. It may not be significant but it is still better than what you had with OE.
@FatGuyBuilds2 жыл бұрын
Pretty much what i showed. Thanks for your added context.
@walkingwiththelordjesuschr30772 жыл бұрын
Do you have to apply right stuff around the 2 orange rings? If so is it just a little around both and how long should you wait before installing? 24hrs to dry?
@FatGuyBuilds2 жыл бұрын
@@walkingwiththelordjesuschr3077 no you dont "need" it. I just like being overly cautious. 2hrs to dry good
@bossmanspecial25913 жыл бұрын
Are you planning on installing the spd downpipes? I used yer video when I installed my whipple intercooler. Thanks
@FatGuyBuilds6 ай бұрын
Thanks for watching!
@kprimm834 ай бұрын
I know this video was from years ago, but on the BOV thats 50/50, do you have to remove that hose that goes down to the intake and cap it off? Thanks for the video!
@FatGuyBuilds4 ай бұрын
No you dont. That just goes to the front of the turbo. Does not do anything bad. That would defeat the 50/50 and would make it 100% bov to atmosphere
@mwmarilyn506 ай бұрын
great video
@FatGuyBuilds6 ай бұрын
Thanks!
@thekbscobravert2 жыл бұрын
Cool channel. Found you after we just bought our Explorer ST. Got more videos of just the garage?
@FatGuyBuilds2 жыл бұрын
Good idea. Ill make a tour video
@billyboy_12 жыл бұрын
Awesome. Im gonna grab a 50/50 for my 2022, I didn’t know it was this easy lol
@FatGuyBuilds2 жыл бұрын
please hit like, it helps me out a bunch
@EarWormSound Жыл бұрын
I didn't think you could install that on a 2022, doesn't have a BOV stock. What did you end up doing?
@FatGuyBuilds Жыл бұрын
@@EarWormSound of course it has a stock bov
@EarWormSound Жыл бұрын
@@FatGuyBuilds wrong ..The 2022 does not have a BOV... The pressure is fed back into the intake. Look it up :)
@FatGuyBuilds Жыл бұрын
@@EarWormSound will do
@martinmartell22523 жыл бұрын
great video!! What boost number should a stock ST make? thanks!
@FatGuyBuilds3 жыл бұрын
12-14
@walkingwiththelordjesuschr30772 жыл бұрын
How do you apply the right stuff properly? Just put s little around the 2 orange rings and let dry?
@FatGuyBuilds2 жыл бұрын
You just rub a lil on the oring the install
@lawrenceblah15632 жыл бұрын
So should I get this one? Or the 50/50 version? For better performance wise.
@FatGuyBuilds2 жыл бұрын
Doesnt change performance
@PADROTE183 жыл бұрын
Can't hear the difference
@FatGuyBuilds3 жыл бұрын
It is suttle but it is there
@ryanmyers55113 жыл бұрын
The one he put in is a full circ back to intake, the dual port is a different part number, and is 50/50 recirc to atmosphere, thats why there is not sound difference
@FatGuyBuilds3 жыл бұрын
@@ryanmyers5511 in person there is a slight sound difference. I have a 50/50 vs recirc coming out this friday
@ryanmyers55113 жыл бұрын
@@FatGuyBuilds cool man, I just got my 50/50 today, gonna put it on. Just bought "my wife" a ST so im getting it ready for some more pep, I like the vids, keep up the good work!!
@FatGuyBuilds3 жыл бұрын
@@ryanmyers5511 the 50/50 sounds good you will like it. It bolts on at a different clocking angle
@garys9718 Жыл бұрын
Where did you find that 10mm?🤣🤣
@FatGuyBuilds6 ай бұрын
thanks for watching!
@yourdone5929 Жыл бұрын
sounds the same
@FatGuyBuilds Жыл бұрын
It is the recirc model. It is a tad louder. But retains factory funtion