Ford Fiesta Sync 2 to Sync 3 Upgrade

Hey there NaviUpgrade family! Thanks for checking out my video on upgrading your Ford Fiesta from Sync 2 to Sync 3! If you have any questions, feel free to drop 'em below.
Here's a link to the full kit from NaviUpgrade.com: naviupgrade.co...
The kit in the video is optioned as follows for a 2014 Fiesta:
6.5" Display (non-recessed)
Non-Navigation APIM (although you can select navigation if you wish!)
Dual Port USB Hub
GEN2 v1 Hub Wiring Adapter

[@evanstelly7404]

I know the Sync 4 hardware is different, but hopefully one day in the near future, we will be able to upgrade from Sync 3 to Sync 4. Great video btw!

[@NaviUpgrade]

Thanks! So it's different hardware but almost all the same wiring -- except it runs off of HS4 instead of HS3. We just gotta figure out how to get HS4 into the network along with programming the system, then we'll be cooking with grease 😁

[@lUcario97676]

Been looking for this dropped your crown king

[@BenRait]

Great introduction and fantastic camera work!

[@NaviUpgrade]

Thanks Ben 😁 wanted to break out the slider for this one but was too lazy 😝

[@MultiCarlosangulo]

Hello, thank you for your excellent video, I want to know if it is necessary to make more updates for my Ford Fiesta 2014 Titanium or if only what you show in the video would work, thank you

[@ChrisRuch]

This worked perfectly - thank you!!

[@NaviUpgrade]

Glad to hear it, Chris! 🤘

[@pyromancer49]

Is there a specific sync 3 unit that is needed for this upgrade? I have a 2015 fiesta Se, and want Android Auto in the car.

[@michaelj.gryschuk5206]

The link for the conversion kit isn’t available anymore! Do you not offer this product anymore? :(

[@mathisoleksow7516]

Hi, I'm French, I have a 2016 fiesta st line with the sync 1 screen and I'm looking for a sync 3 system screen too. Do you know where I can buy one?

[@heronshorts]

Is there a list of everything you have to buy? you only link the adapter

[@appletango2424]

Can you remove the APIM module from the screen? I want to buy a sync3 APIM on eBay and fit it to my existing screen, is this possible? Thanks

[@jonaspedersen4080]

Hi. I have a 2015 fiesta ST. If I want to upgrade my screen is it stil possible to get into the car menu? Fold mirrors, tire pressure control and the other setups??

[@ZethM182]

To my knowledge the 2015 fiesta st doesn’t have those features

[@Axel-mc5wf]

Great Video, soon I feel confident to do this on my own car. Just one question, when will you start selling the mounting bracket to ford focus you talked about in a earlier video?

[@NaviUpgrade]

Oí great question. I think I have a legit source for OEM ones now so that could be happening soon 👀

[@coryrogers380]

So if I get the option without having the nav, will apple CarPlay still allow me to use maps? Or is the nav upgrade a necessity?

[@cgleeson]

Hi man top tier vid. Just wondering if you've had this tested in Uk spec vehicles. (I'm in Ireland but should be the same). I'd love to upgrade the system in my 2015 red edition zetec s

[@vasili1207]

Same but wales.... 2014 fez

[@bbkiwi4]

Hello! Couple of Qs. 1. After this upgrade, does your car microphone still work for phone calls? 2. If I pick APIM with no navigation, will Google Maps/Waze still work on the screen? 3. Any timeline on when Non-Recessed screens will be back in stock for the Fiesta? Thank you!

[@NaviUpgrade]

Hey hey! 1. Absolutely, the mic will still function for calls and Siri//Google Assistant + Sync Commands 2. Yes, non-nav will still allow for CarPlay and Android Auto. 3. I have a couple Fiesta screens but they're not new. Not really scratched or anything I just don't feel super comfortable selling them full price. If you want to shoot me an email I can get you setup with a coupon code. Hope this helps! Thanks!

[@nlmusic8d479]

Hello, i have a Ford Fiesta 2014 ztec with sync 1. I want to upgrade it to sync 3 is this possible?

[@NaviUpgrade]

Hey there! Absolutely. I haven't had the opportunity to figure out what parts are necessary but I've got the wiring figured out 🙂

[@nlmusic8d479]

@@NaviUpgrade hopefully you can figure it out asap really want to upgrade it

[@danielwijaya4231]

Hello I have a fiesta mk7.5 and here in my country our fiesta is still equipped with basic mini HUD, so if I wanna upgrade sync 3, skipping from sync 2 still works just fine?

[@NaviUpgrade]

Yessir!

[@RuisuDev]

my sync 2 stopped working, so i see a good opportunity to upgrade to sync 3. My questions are if the camera, sensors and ABS control still work well?

[@NaviUpgrade]

Absolutely! As long as you have Sync 2 currently, it's a simple upgrade!

[@zodion8]

so i'm in the US and have a 16' FiST, which I am sure have a sync 3... but I don't even have the option for android auto. do I just need the USB port and it should show?

[@NaviUpgrade]

Yes! You just need the new hub and you'll need to update past Sync 2.3 -- I have a video on my channel on how to go all the way to Sync 3.4 easily 😁

[@Alwayshungry305]

So after this upgrade, dont need the sd card anymore?

[@brxndon.72]

does it work on uk model?

[@pole120]

I no longer see this on your website. Is the kit still available?

[@NaviUpgrade]

Unfortunately the 6.5" screens became unobtanium for me 🥲

[@pole120]

@@NaviUpgrade I'll be receiving used parts from a 2016 ST. Can I still get the USB power adapter harness and navigation antenna?

[@NaviUpgrade]

@pole120 absolutely boss.

[@Hkoonerucha]

I have same car 🚗 but how can charge please tell me

[@stashbob]

Brian, after this upgrade, can I use the Sync 2 APIM module/Screen for another vehicle. Was thinking about using it on my Sync2 F150 (non-Nav). the Escape Sync 2 that I am replacing is the Navigation version. Would there be programing necessary? Any info would be greatly appreciated!!!

[@NaviUpgrade]

Absolutely. Although the Fiesta screen is 6.5" vs 8" on most other Fords.

[@stashbob]

@@NaviUpgrade Thanks for the response. Both are 8" (and seem to be identical less the navigation functionality), so would I just plug and play the APIM, plug and play the APIM and screen, or would it require programing?!?

[@NaviUpgrade]

@@stashbob it will probably require programming if it's from a different vehicle. The easiest thing to do would be to take the Nav SD card from the nav car and put it in the non nav car then enable navigation in the non nav car using FORScan. I filmed a video on how to do it in this car but I think the sd card I used was bad so it didn't work. I'll think about posting it haha.

[@Iroquois666]

You legend ... Any clue if this works with the UK variant of the car?

[@NaviUpgrade]

It will 👀

[@yoshiman12232]

Does your store still work? The URL is a mess...

[@shailinjanki]

I have a sync 1… is it also possible?

[@DetroitTarpMATT]

Will this work on a 2012 Lincoln MKS?

[@alexanderpetrenko79]

Do I need both new screen and new APIM for upgrade? PS: I have 2016 Focus.

[@NaviUpgrade]

Hey Alexander -- most 2016 Focuses should have had Sync 3 unless you are in a country who didn't allow it until later. If you're sure you are on Sync 2 and want to go to Sync 3 yes, you will need new screen and APIM module hardware along with a hub and gps Antenna.

[@punkly8423]

The link is unfortunately dead, do you still sell the kit?

[@krakdaus5442]

Did you stop offering this kit? I don't see it on the website

[@NaviUpgrade]

Nope! Still have it! naviupgrade.com/shop/hardware/sync-2-to-sync-3-kits/easy-fiesta-sync-2-to-sync-3-upgrade-2013-2015/

[@DavidODST]

Does it retain hill assist and traction control toggles?

[@NaviUpgrade]

Yep! They're under the 'Vehicle' menu under Settings

[@dejanjustin9005]

hello i have ford s-max 2016 with sync 2 and i didnt find any video how can i change it to sync 3 can u help

[@NaviUpgrade]

Ah dang, we don't have the S Max over here in the US. The process should be fairly straightforward as it's just a screen/APIM and hub replacement along with a GPS antenna. You'd just need to figure out how to remove the correct trim pieces.

[@nicholasfenlon]

Prise the two vents out either side of the screen, pop out the top of screen facia, undo the two bolts that that hold the top dash tray in place , pop out the round part of the tray towards the windscreen which is part of the top dash tray as there is a bolt underneath it, its quite difficult to get this part out, you need to remove it so you can place the new sat nav antenna under there, pop off the two padded side trims that run along either side of the centre console arm rest, pop of the chrome trim around the gearstick that runs up the sides where the USB /sd card housing is, prise up the centre consul cup holder and trim and disconnect switch plugs, you should now see two bolts that holds the usb/sd tray either side, remove them pull out usb/sd card tray compartment and there is two bolts that hold the bottom of the facia undo them and that's it

[@dejanjustin9005]

@@nicholasfenlon but witch components would fit the S-MAX i dont know witch set to buy

[@nicholasfenlon]

@@dejanjustin9005 I got mine from here, my car is a 2016 s max and this is a straight swap, 64gb or 32gb version, up to your self what gb version you need for sat nav ￡364.91 | Factory SYNC 2 to SYNC 3 Upgrade Kit APIM Module Carplay Fit for Ford Lincoln Sync3 a.aliexpress.com/_v4sF6R

[@dejanjustin9005]

@@nicholasfenlon great thanks for your help i think i will try to upgrad it

[@scodavid3865]

Can u go from sync 1 to sync 3 without ever having sync 2

[@NaviUpgrade]

Absolutely!

[@deanhiggs4473]

@@NaviUpgrade could you please give me some more information

[@GrumpyFelo]

nice kit, I will get that for myself for my 2015 fiesta st. Question, can you change/program the start up boot screen when you are programming the VIN number for a customer? (I guess you do this in ForScan), I have a fiesta st, so I would want something like this kzbin.info/www/bejne/r57WXqOfoNKWaKc

[@Floatacious]

If only these were in stock :( If anyone responds, do they come back in stock?

[@NaviUpgrade]

Yeah they'll be back today. Just out of USB hubs 😅

[@lazarus3.023]

Sync 2 is so ass. I’m sorta tempted to give this a swing

[@NaviUpgrade]

You absolutely should 👀

[@emsea1658]

sync 2 is such trash

[@RuisuDev]

it works on 2013 ford fiesta rigth? if it has the same sync 2

[@TheCaptainRaiders]

Will this work for a 2012 Ford Fiesta SES?

[@NaviUpgrade]

As long as your Fiesta has Sync 2 it will work!

[@karlarmstrong7829]

Will this fit the fiesta st180 2013?

[@NaviUpgrade]

Yes!