Hey Everyone if my Channel Helps you save some money, please consider a small donation via this paypal link. Paypal.me/GearmoAuto I would love to make more content with better quality to help everyone save money and time. Thank you!
@LuisRamirez-ln3cj4 жыл бұрын
A shop wanted $180 for parts and labor. I paid $35 for some great pads from Autozone and did the job in about 45 minutes. Thanks for your tips, as they made the job a lot simpler and safer. 👍
@cyraxkkcb2mo104 жыл бұрын
Bout to get it done myself as well...some mechanics like to fix one thang and brake another...
@ryanmitchell66352 жыл бұрын
Thank you bruh I thought I broke my car, I accidentally set it on😂
@richardfowler32545 жыл бұрын
Did this yesterday doing the rear brakes for my daughters Fusion. I was able to compress the rear caliper piston with a "C" clamp. Make sure to 1) remove the brake fluid reservoir cap, 2) watch and remove (if needed) brake fluid while compressing the piston 3) place a large rag under the reservoir because it will spill down on the engine (happened to me). Don't forget to reverse the process to take the car out of brake service mode...
@cyraxkkcb2mo104 жыл бұрын
Thanks for the advice..😝
@TundeKassim3 жыл бұрын
How does one reverse back out of service mode?
@naynay1690 Жыл бұрын
Thank you I was just stuck at work lol
@shyegoon3 жыл бұрын
What’s the park break limited functions ?or the park break malfunction
@mmm4638 Жыл бұрын
I did my two 1st brake jobs w/o doing this never had a light. This time 3rd time after doing my rear brakes, lights came up. Brake function both parking and regular was good. So doing the in out of service mode it reset the parking brake and no more lights. If any issues later come up will edit but so far it's fixed np. In and out of service mode is also a hard reset just keep that in mind.
@alexdonhauser8870 Жыл бұрын
Do you need to do this when your replacing the parking brake button it'sself my e-brake button has alot of wear and tear on it and I want to replace it
@kevindiaz34593 жыл бұрын
Do you have to leave the key turned on the entire time? Or does it remain in maintenance mode even if you turn the key back off?
@1slosport3 жыл бұрын
Just did mine and you can turn it off
@snuggles071711 Жыл бұрын
What does it mean when it on reading "Parking Break Malfunction service immediately: does that mean it's out and am I still able to drive the vehicle?
@MM-cv3bm2 жыл бұрын
I had my brakes repaired recently and the brake warning has popped up. Do you know the procedure to reset this?
@Chickenhunter223 жыл бұрын
So does this allow the actuator to move freely?
@merakipaz Жыл бұрын
Awesome. Thank you
@natalieroller91894 жыл бұрын
Hello I need your help I had found a mobile mechanic service to come change my rotors and back brakes apparently the guy didn't know he had to put my car in service mode I don't know what the hell he did but he did something where my abs light and brake light stays on throughout my entire time i am driving and theirs a chime that won't stop until I'm done driving and it drives me crazy . The emergency brake has released all the way otherwise I wouldn't be able to move anywhere . I need your help please 🙏
@GEARMOAUTO4 жыл бұрын
Dang Im sorry. I would recommend going to the dealer and having them double check the work and reset the computer module. Theres not much I can help with cause I dont know if the work was performed correctly and its just a computer issue or if there is a serious malfunction and the computer is trying to tell you that.
@stoneysamone5182 жыл бұрын
Having this issue NOW
@appolloniastrowbridge26499 ай бұрын
I just had my rear brakes and rotors done and now my park break light is on and want go off
@fahadalhameedi51294 жыл бұрын
Thank you so much!! it worked for me
@wallec41405 жыл бұрын
So you just have to compress the rear piston back into position?
@j.balance78445 жыл бұрын
Walle C yes
@moranjk20825 жыл бұрын
I used a screwdriver and wedged it back home before I even took the caliper off.
@yosehtarfasa7240 Жыл бұрын
Thanks a lot.
@ZylahTibbs Жыл бұрын
I got mine in but couldn’t get it out
@nicolebecker22722 жыл бұрын
What do u do when u have a push start?
@GEARMOAUTO2 жыл бұрын
Same thing just push the button instead of turning the key
@claritonclear5 жыл бұрын
This is the way to do it
@ChOcHiZ10004 жыл бұрын
Gracias me ayudo like amigo si usaras subtitulos en tu video en español estar a genial para que lo vieran mas personas
@ilkinmanafzade13163 жыл бұрын
Thank you Bro 👍👍👍👍👍👍👍👍👍👍👍👍🇦🇿
@blessboii97753 жыл бұрын
Yakh shisen?
@MisterFusion1135 жыл бұрын
Why the F-usion isn't this just in the menu?
@cyraxkkcb2mo104 жыл бұрын
Money..nice doing business with you.thank you come again..🤑
@dwaynemadsen9643 жыл бұрын
@@cyraxkkcb2mo10 LOL! This was my first good laugh of the day, thank you! Stay safe.
@okwui04 Жыл бұрын
So your 70 year old grandma dosent easily turn it on
@blkbrdmntrvimes64382 жыл бұрын
Followed every step and it's not doing anything
@moranjk20825 жыл бұрын
Fusion Fun Fact... Brake switch failing will cause Limp mode on the car. Huh??!!
@LuisRamirez-ln3cj4 жыл бұрын
So will a bad 12V battery. It happened to me. I was like, why does the car feel so heavy all of a sudden. Then the Wrench light on the dash came on.
@lwthowe3 жыл бұрын
Could you possibly have made it more confusing?
@behnammohajeri7047 Жыл бұрын
You're talkin too much you didn't know what sorry about that I have to say it