Ford Maverick LED Front Sidemarker Upgrade So BRIGHT!

[@RobDaman]

So I'm converting all my halogen bulbs to LED if I can! Next step are the sidemarkers with the help of my oldest son Jesse. Pick up these Lasfit sidemarkers here! lddy.no/142g8 Coupon code ROBgets10 door popper tool amzn.to/3p1WnMd If you find these videos helpful and would like to support me and my work, see below: Click my affiliate links for Amazon store: www.amazon.com/shop/robdaman Some folks have asked about Patreon and just some place donate. I'll post up but PLEASE if you need to take care of yourself and your family please do that first. Thank you! www.patreon.com/RobDaman PayPal pool www.paypal.com/pools/c/8wzKEpUz9N Thank you all for your continued support!

[@Mg_L.A.]

as a dad nothing more than pride to see you and your kid working together, congrats

[@tuffguy007]

You are lucky to have such a competent assistant (sorry dad, but he was the star). Thanks for the great instruction - saved me time on the driver’s side. Cheers.

[@-Dwight-Schrute]

Thanks. Glad to see you remove the driver side. If I upgrade the light I may do some striping for effects on this orange cover but would still want the light to come through strong.

[@davidc977]

Looks good..Great to see you and your kids doing the mods together.

[@101boosta101]

Nice Price seen another one selling these for 49.00 cant beat $13.50 Thanks for the Video and Link ..

[@erwinandfire]

Thanks for the video! I tried going under like some other videos did but like you said it was a fail. I'll try again tomorrow from the side. Very cool to see you work on these things with your kids!

[@lowridingtrucks88]

Looks good Thanks for making video and putting bulb link 👍

[@OldAndGettingOlder]

Thank you for showing the way. I'd like to add how I did this job. Just as you did, do the passenger side first. You showed how to pop out the light and I did this to change the bulb. The flexible clip is as said on the forward side. This is important to know doing the drivers side. The passenger side is easy peasy. The drivers side.... Whoa. How did you get a hand in there? I couldn't so here's what I did. I used a long Allen wrench to reach in to catch that forward side clip, The Allen wrench gave me the reach I needed. In conjunction with this I used a plastic trim tool to pop the lens out from the outside. With the Allen wrench I barely had to stick my hand in behind the fender. Any stiff L-shaped long tool will do the job. It just has to reach in to snag that clip. By doing the passenger side first and seeing what is what, you can visualize what you need to do out of sight. Anyhow, your video steered me straight to get this job done.

[@RobDaman]

Glad to help

[@cmderden]

Yeah I started on driver and gave up. Replaced all the other lights I could with LASFit, but that drivers side defeated me. Wasn't even able to see the dang clip (my plan was to push the assembly out as well). There is a lot going on back there. May give it a go another day, but luckily the marker lights were my lowest concern.

[@miguelsaidhaddadchavelas7272]

where did you buy the ply tool ?

[@RobDaman]

This one? amzn.to/3p1WnMd

[@ynad]

Just use a plastic tool to pop it ✌️

[@Lilllingstoner]

Wheres the Taco?

[@torres870rem]

It may eat up your battery faster?.

[@-Dwight-Schrute]

No these LEDs use so little power and are much more efficient than the old bulbs.

[@driftx2]

Yea led generally are hotter and use more power