Ford Ranger 4.0 Dual Exhaust Black Widow Exhaust Race Venom Angry Housewife Series Muffler

[@matthewschulz2745]

Good comparison, new exhaust sounds nice

[@pay2playent62]

I ended up removing 2 catalytic converters & man it is too loud but it turns heads I might upload a video on it soon

[@keepitsolidkeepitreal2877]

@@pay2playent62 dope

[@westvirginian7412]

Sexiest Ranger I've ever seen, bro--nicely done. 👌

[@davidbautista9]

Nice ranger hiw much and where you get that exhaust?

[@justonpreble4083]

Bro Sick Ranger!!! Where did you get your fiberglass? How many inches wider is that glass? The stance on that looks so good…

[@pay2playent62]

Yo what’s up 🤙🏽, the fiberglass bedsides and front fenders I found on Offer Up and Facebook MarketPlace from a local seller , but McNeil and Fiberwerx as well as Duraflex sells them on there websites

[@pay2playent62]

I think the front are 6” or 8” and the rear bedside ones are 6” but I went larger and they look sick af, the bedsides are now 10” McNeil Flattop bedsides I’ll send u a link to them

[@pay2playent62]

www.mcneilracinginc.com/products/93-12-ford-ranger-10-bulge-flat-top-off-road-fiberglass-bedsides?variant=37262211940502

[@pay2playent62]

www.mcneilracinginc.com/collections/98-ford-ranger-off-road-fiberglass

[@justonpreble4083]

@@pay2playent62 Thanks for the links!!!

[@matthewduby8099]

Kinda sounds like mine but a little higher pitched... I've got a single pipe Flowmaster

[@pay2playent62]

It sounded good here in this video with the cats still on , now that I removed them it’s too loud and raspy I think I put up a new video it’s a reel not sure if I’m liking it or not too much drone

[@Devon_241]

@@pay2playent62did removing your cats cause it to run rough? And what did you do with your 02 sensors? I’m looking to get rid of mine I have an 01 4.0 sohc

[@pay2playent62]

@@Devon_241 surprisingly it runs better , being that my catalytic converters were really bad and super rusted out. Engine most likely breathes better and didn’t really notice anything with MPG, the truck is super loud though

[@chrishansen7004]

certainly an interesting sounding V6 when piped right. almost sounds like that electric hellcat 😂

[@pay2playent62]

😂, I tried my best to make this ranger sound good I’m used to a V8 sound from my other foxbody so when I got this ranger I hated the exhaust but now I did a full cat delete and it sounds too loud and raspy I just gave up on it I don’t think any muffler or custom exhaust will make it sound like a v8 lol only a V8 swap 🤷🏽‍♂️

[@chrishansen7004]

@@pay2playent62I’m in the same boat as you, I’m hoping one day to swap a 5.3 with a cam into my ranger. Life is too short too not have a V8 quarter ton!

[@pay2playent62]

@@chrishansen7004 if your looking for power mainly I’d for sure go with a 4.8 or 5.3 Chevy motor but if u just want the v8 sound and a little more power than a 3.0 or 4.0 v6 that cone with the rangers , I’ve heard a 5.0 from an explorer is a good choice which is probably the route I will be going , it’s a much easier swap since a lot of the explorer stuff like the wiring is plug n play

[@anziety604]

yup 5.0 is definitely the easiest route, though I want an ecoboost. I have a 2nd gen Explorer 2 door with the 4.0 ohv @@pay2playent62

[@skypiratecaptain]

@@pay2playent62I’m doing headers and an x pipe on my 4.0. Will sound way better than the stock exhaust manifolds and y pipe. That’s stuff is dogsh!t

[@David-vo1hc]

Where did u get those tail lights and are there plug and play

[@pay2playent62]

Yes direct plug n play I’ll add a link to them got them off ebay like 2 years ago and still look new

[@pay2playent62]

& these are for 1998-2000 anything after 2001 is different

[@pay2playent62]

www.ebay.com/itm/285293520731?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A10Nl1L5NxQBWYassLt__nMQ82&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=285293520731&targetid=1644837436443&device=m&mktype=&googleloc=9031027&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837436443&abcId=9300842&merchantid=101647840&gbraid=0AAAAAD_QDh8qbGV3ZspkT_0tjK8JpjAgX&gclid=EAIaIQobChMItfnhk-CT_wIVagCtBh2UXw5dEAQYAiABEgJiNPD_BwE

[@GioOmerta]

Dope

[@devingerritsen8419]

Nice ranger man!! Where’d did you get that sweet back bumper that is perfect??

[@pay2playent62]

thanks man🤙🏽, im not sure since it was on there when I bought the truck , lots of ppl are asking about it so im gonna hit up the previous owner n see what it says I’ll update you asap

[@devingerritsen8419]

@@pay2playent62 Thanks man I really appreciate whenever you find out lmk bro take care sweet rig🤝🏽

[@xayto5831]

What size tires and lift do you have on it?

[@pay2playent62]

It’s on 35’s,the front has a Camburg Mid Travel Upper Control Arm Kit and Spindle

[@Andres-kg8cp]

what gears are you running with those 35in tires?

[@pay2playent62]

it’s still on factory 3.73 gears I haven’t re geared it the only thing I’ve done is changed the diff fluid , only reason I haven’t re geared it’s cause it doesn’t struggle to move the tires , anything 35’s will for sure need gears

[@pay2playent62]

anything bigger than 35’s will need re gear 37’s+

[@pay2playent62]

I actually had 3.55 they sucked with the 35’s bad. I have 4.10’s now it’s a lot better

[@XG916]

Idle sounds like somebody farting and pushing on the gas sounds like throwing up

[@pay2playent62]

😂😂😂

[@pay2playent62]

I agree v6 or 4cyl exhausts usuallly sound like shit

[@pay2playent62]

It’s getting a 5.0 swap soon so it should sound better 😎

[@XG916]

That's rad. I'm a big fan of the 4.6 2v Didn't mean to slam to hard on the 4.0 lol I just grew up on a island hearing them with rusted out exhaust pipes