Ford Ranger and Ford Everest UHF Mount || Best UHF Mount? || Out There n Back

[@ricksoesman7608]

Ingenious, convenient location and you’re right, it was so simple to install. Thanks for the video, great help!

[@GetCampingOz]

Yeh it is a cracking good mount. Have you seen the phone holder mount as well? I just posted that up the other day! I now run both - one uhf and one phone. It’s an awesome combo 👍🏻 thanks for watching 😀

[@ebswift]

Thanks mate, love the location of that handpiece, just ordered one from your link after I've (mostly) finished installing a GME on my 2021 Raptor. Got as far as a successful radio check, just need to finish up the fitment.

[@GetCampingOz]

Glad it helped! Sounds awesome mate!

[@outtherenback4x411]

Thanks Adam for doing these videos. You are very talented and Myself and my family truly appreciate it. I'll be in touch soon.

[@GetCampingOz]

No problem at all Steve. Thanks for making the best UHF mount 👍🏻

[@yeerboi]

Thats awesome! Thanks for the vid. Good to see these mounted before having to purchase.

[@GetCampingOz]

Glad I could help!

[@4wdmudlova]

Hi, thanks a lot for providing such easy to follow info. I have just done this on my 2017 and took about 10minutes (longest part was finding small enough bolts for the uhf bracket) 😀😀 cheers.

[@GetCampingOz]

Glad it helped! Thanks for watching

[@Bigbrotherondaroad]

Awesome video Adam. Niffty little idea and so easy to install.

[@GetCampingOz]

Sure is. It’s a great mount. Super sturdy as well

[@my19ranger76]

Good stuff keep the Ranger vids coming!

[@GetCampingOz]

Cheers. Got a few in the pipe line 👍🏻

[@unknownsamoan01]

The mount and GME arrived and I just installed it. 👌🏾 very easy. However, the GME doesn’t fit my UHF radio properly 🤦🏾. I’ll see if they have a GME to fit mine. Uniden 9080.

[@GetCampingOz]

Yeh its an awesome mount. Makes it so neat. Shame the GME clip doesnt fit the Uniden!

[@gerardm5911]

Thank you just ordered one .... could you please show how or where you have mounted the GME box unit

[@GetCampingOz]

Awesome. The main GME unit is mounted under the dash below the glove box. I used double sided tape and a zip to hold it in place.

[@goofiegoofball]

Just got one after spending days trying to work out where I can mount my hand set on my ranger. There's no flat surfaces anywhere!

[@Big_Ted1872]

Great video thanks for sharing. I was wondering where you put the RJ45 plug for the mic? I’ve got a Ford Ranger PX II and still trying to figure out where to put the RJ45 connector. I know STEDI have a moulded plastic insert that fits between the 12v charging points, but not really keen to spend $80 for it. I’ll definitely be getting the mic mount too.

[@GetCampingOz]

I have a lightforce fascia panel that sits under the radio controls. I used a GME RJ45 socket that lights up! It was pricey but finishes it up nicely

[@Big_Ted1872]

@@GetCampingOz Hmmmmm… The RJ45 connector available on GME’s website? I have a look at Lightforce’s fascia. Thanks for replying…

[@Big_Ted1872]

@@GetCampingOz Would you by any chance know the part number of the GME RJ45 socket you used? I've had a look at GME's website and there are soooooo many to choose from. Thanks again.

[@GetCampingOz]

@@Big_Ted1872 no worries! It’s the GME XRS-RJ45R1 XRS Pass-Through Adaptor - Type 1 (Red). I purchased it if eBay for about $34

[@Big_Ted1872]

@@GetCampingOz You sir are the best.

[@brabs2754]

I was after where you mounted the actual radio as well

[@GetCampingOz]

The main body of the UHF is mounted under the glovebox. I’ve used double sided tape and zip ties to hold it in place. Fits nicely and is discreet

[@brabs2754]

@@GetCampingOz good spot thanks for that ...

[@danstevens8901]

Anything for next gen rangers yet mate?

[@GetCampingOz]

I believe they do! I think it’s the A pillar grab handle phone/uhf mount they have. I’m not sure if they have a vent mount yet?

[@goofiegoofball]

My bracket arrived today, the AC vent feels like it's too stiff and is being stubborn. I don't want to break it

[@GetCampingOz]

Yeh they can be a bit stiff but it will pop out

[@wkel70]

Is you GME the 330 or the 370? Cheers, appreciate the video

[@GetCampingOz]

Mine is the 370. Uses the same handset as the 330, but has a larger base unit with internal speaker 🔈 and also has magnetic 🧲 mic holder. Check out this vid from GME that explains the difference kzbin.info/www/bejne/qWfJh6SKd89gr5I hope that helps 👍🏻

[@wkel70]

@@GetCampingOz Thanks for the response, have seen a couple of installs for the 330 and but am keen on the 370. Cheers

[@paulg101]

Do you have a discount/coupon code for out there n back

[@GetCampingOz]

Hey mate sorry. I purchased this mount and didn’t have any affiliation with them at the time of shooting. They did send me the left side to review but received nothing in exchange. Cheers

[@Wdthyfdo]

Dont suppose you've got a mount for the px1 ?

[@GetCampingOz]

Im not apart of the manufacturer, however I have had a look on their website and it doesnt appear to be anything available for PX1. You could contact them and see if anything is in the pipe line. Thanks for watching

[@outtherenback4x411]

The next design will be for a PX1 and the good thing is, it will suit the PX2 PX3 and UA Everest in a different spot right of the steering wheel.

[@SuperV8ford]

Did you buy the Mount from a Ford dealer ?

[@GetCampingOz]

Bracket is from Out there and Back - out-there-n-back.com.au/product/ford-px2-px3-ranger-and-everest-fixed-mobile-phone-or-uhf-mic-bracket/

[@outtherenback4x411]

Hey guys, there is now a drivers side A Pillar phone mount bracket for the PX2/3 and also one for the next Gen ranger. All available on the out there n back website.

[@djaldin1]

Hi guys is there a bracket for a 2023 bt50?

[@BradleyRolls]

hey guys do you have a mount to suit ford ranger next gen ?

[@GetCampingOz]

Hey mate, Out there and back do have a mount for Next Gen Ranger. Cheers

[@BradleyRolls]

@@GetCampingOz thanks - where can i view it ?

[@GetCampingOz]

@@BradleyRolls out-there-n-back.com.au/product/ford-next-generation-ranger-raptor-and-everest-fixed-mobile-phone-or-uhf-mic-bracket-right-of-steering-wheel/

[@richardwalsh5570]

I think $49.95 is a RIP off

[@GetCampingOz]

For a mount that is designed built and manufactured here in Australia 🇦🇺 $50 is a small price to pay for something that works. Thanks for watching