FORD RANGER MAZDA BT50 3.2 P5AT ENGINE ASSEMBLY GUIDE | INCL TORQUE SPECS | OVERHAUL REBUILD

P5AT Engine block and cylinder head assembly

[@oshinzmarshallbrown2766]

Second 3.2 rebuild off of ur video man. Thanks heaps

[@Cuongdimo]

When installing the crankshaft into the engine body, as a rule, you should not install the bolts from left to right or from right to left, but rather from the middle to both sides.

[@binhtranvan4704]

great thanks for letting me know more about technical expertise

[@btdgarage]

Hi Brandon. Yes it is. #4 on top, and #1 is slightly lower at TDC. I’m just not sure if the marks are spot on @ 6:50, but it’s best to use a timing alignment tool like I did on the later part of the vid :)

[@brandonlawson7815]

Thanks for the reply, yep i have an alignment tool to get it spot on! :)

[@corporalpunishment1133]

What an awesome video. You certainly didn't screw around and waste our time with useless exposition walking around taking to the camera. 👍🇭🇲

[@btdgarage]

Thanks! :)

[@cristopheroliva941]

Hola

[@leonardoambrogio8507]

buenísimo

[@gagacrazy10]

Hi mate, did you reuse the ladder frame bolts, I tried reusing mine and the first one I tightened snapped.

[@brandonlawson7815]

At 6:50, just for a visual reference for piston position, is this the same position you had it during setting timing/ is this at tdc?

[@mariapurezagil197]

Exelente la pulcritud como hacen todo el proceso

[@chlyon]

Hi great video , got same engine , tapping when running every second revolution sounds like lifters but been in there and nothing seemingly wrong they are all reasonably loose . No tapping when cranking . Any ideas ?

[@Pete856]

Thanks for the video....I haven't need to use it yet, but it might have helped solved an issue. I just bought a 2012 BT50 with a 3.2 P5AT, got it very cheap at auction because it was listed as "engine knocking", but it's not, it's a metallic pinging sound from the head every 2nd rotation. Now that I've seen the rocker arms, I'm betting it a rocker arm bearing that's gone. I was thinking I might have to rebuild the engine, now I'm thinking it's a really easy fix....what's funny is I found an invoice to "fix" the engine pinging, the previous owner spent more than I paid at auction to put in new injectors and re-seat them, and replace the turbo only 3,000 Km ago 🙂

[@user-rr3bm5jh7n]

Привет! Покажите демонтаж и ремонт гидрокомпенсаторов форд Рейнджер 3.2л. Т-6. Заранее спасибо.

[@ianpotter1253]

Would you have a approximate price for a bt50 rebuild including the updated oil pump. Thanks.

[@user-dl8co4mv7l]

Good evening sir. . Tanong kulng po. . Normal lng puba Yung. Bagong overhaul 3.2. Kpg po unaNg start. Wala po syang usok sa oil cap.kpg nmn nag init na sYa . Mga 30minutes npo. Umandar My kunting usok po sya sa oil.cap. .normal Lang puba un.

[@dimitrakarkali7503]

Hello my friend this fuel pump need timing?

[@ricardowendellaquino]

This is Duratorq 3.2 5 cil.?

[@chicolibre7889]

Ano po problema sa montero 4n15 pag umaga pinaandar bigla na lang baba rpm (idle) isang beses lang(after mga (3-5 secs) yayanig po..tapos ok na..basta malamig makina may isang yanig po na baba rpm..na clean ko na trottle body po at maf sensor po..fuel filter changed narin po pati air filter po...wala kasing lumalabas naman na check engine..walang makita yung scanner po at maliit lang(basic) po ginamit ko scanner.

[@ZimpohVitalis-pw4on]

I need more

[@ernestdamo677]

Please does the oil pump has a timing Mark

[@P4YNT3R199]

there is a timing mark, but your supposed to use a plate that aligns the pump sprocket with the crank sprocket as the pump bolt holes are elongated and you can misalign it

[@tumelomphela7685]

What is that red stuff you are using?

[@btdgarage]

Assembly lube :)

[@junaks1967]

Mazda bt50 and Ford Ranger have same engine? Thanks.

[@AndyL940]

Yes they do. Same engine gear box diff chassis. From 2020 Mazda use izuzu 3 lt engine