Ford Torque Converter Install | Monster Transmission

Curt shows how to install a Ford torque converter from Thor Converters with a Ford AOD Monster Transmission.
Start by adding fluid to the converter and greasing the torque converter hub, seals and shaft to ensure a smooth installation with out any cut seals. As you install it, you will rotate it clockwise and listen for the clunks as it goes onto the shaft and pump gears.
Always double check your clearance after the install to make sure your torque converter is installed correctly.
As you raise your transmission to install into your vehicle, be sure that the torque converter remains fully installed in the transmission.
Curt takes apart a pump for an AOD to show what can break and where the converter installs into.
MONSTER'S Website: www.monstertransmission.com
Give us a call at: 800-708-0087
Thumbs up the video and SUBSCRIBE for MORE!
www.youtube.co...
Check out our Socials!
Facebook: / eatmyshift
Instagram: / monstertrans
Twitter: / eatmyshift
LinkedIn: / monster-transmission-&...

[@markwoten6679]

Thanks for the information on the alignment of the converter drain plug to the flex plate bigger hole at the 6 o clock position. 😅

[@THEGAME-tz6yu]

best tutorial video on KZbin.

[@jerryl6924]

Thank you for making this video . ive been rebuilding my f150 1990 eod and this has been my problem understanding its installation . thanks for you clear install video

[@risingphoenixbronco5328]

Good stuff. Close camera shots a big help. Much appreciated.

[@brentbass9529]

Thank you that was so informative I'm about to tackle this project tomorrow and I feel more confident now than ever I appreciate the video God bless and thank you

[@jerryjimenez928]

I'm installing a transmission from junkyard, f150 98 4.2l ur info is very helpful thanks

[@saeidkanani1917]

Loved your video buddy!!!

[@alexanderledwith1780]

Very helpful. Much appreciated.

[@jairosilva925]

Awsome video! Thank you!

[@javierestrada6927]

What a great video.

[@dntlss]

Man what a great video,so much good info,yeah something ive learned in all my years working on cars is bolts everything loosely and slooowly start torquing everything down in a star pattern just like changing a tire, if you feel some opposition check and see whats going on, dont be a idiot and just keep tightening the hell out of it,thats a nice converter Curt,looks like its made of gold,lol I recently had a 347 built to go into my car and my builder bought me the flexplate, its a black Scat brand job,any thoughts on this brand? installing the motor next month if time allows,thank you for your time.

[@jayosiris8944]

Great explanation

[@jerryjimenez928]

Very helpful thanks

[@patrickcraft6546]

2003 mustang. How many quarts do you put into the tq converter?

[@arturocrespo7944]

Mi transmission make a bad sound on the flywheel and the converter do you think the converter was bad ???

[@MonsterTransmission]

Could be converter or pump issue making the noise

[@arturocrespo7944]

@@MonsterTransmission so we need to remplace the both parts???

[@MonsterTransmission]

We suggest going to a certified transmission shop to check it out, it could be either or or both

[@arturocrespo7944]

@@MonsterTransmission thanks so much

[@kman-mi7su]

I'm getting ready to do this on a 1988 Ford F250 7.3 diesel pickup and I'm wondering does this same procedure apply to the C-6 transmission.

[@MonsterTransmission]

Yes it does

[@ramonhernandez2413]

Question , if the converter is installed wrong to the flexplate , is it possible to make sure that there both damaged ??

[@MonsterTransmission]

You have to have a certified transmission shop check them out.

[@deweyself4508]

I appreciate the vedio,lot help.

[@MonsterTransmission]

Thank you for the comment, Happy it helped.

[@markwoten6679]

Four flex plate nuts torque specifications

[@howiecoro]

What torque do you set those nuts to the flywheel??

[@MonsterTransmission]

20 flbs