How to Install a Torque Converter on a Ford 4R100/E4OD Automatic Transmission

In this segment Curt shows us How to Install a Torque Converter on a Ford 4R100/E4OD Automatic Transmission . After doing an inspection of the converter, put a quart or two of ATF to the converter to prevent a dry start. Lubricate the hub with some trans gel, this will help with installing the converter into the transmission. When you go to install the transmission make sure to push in and turn it clockwise and listen for three clucks to make sure it is in all the way. Finally, when bolting the transmission to your engine, make sure the converter is still able to spin. Start both sides of the bell housing to the engine and switch back and forth until it is tight. This will tighten the transmission to the engine evenly and prevent breaking the case or pinching the converter.
MONSTER'S Website: www.monstertransmission.com
Give us a call at: 800-708-0087
Thumbs up the video and SUBSCRIBE for MORE!
www.youtube.co...
Check out our Socials!
Facebook: / eatmyshift
Instagram: / monstertrans
Twitter: / eatmyshift
LinkedIn: / monster-transmission-&...

[@thorconverters9034]

Great info as always Curt! That converter should have been gold though 🤨

[@memelord5342]

I wish I saw this video before I installed my replacement transmission

[@crane443]

This helps me didn't know their where 3 things to line up

[@mattfowler7892]

Invaluable info. Thank you for this video.

[@blanejahk2746]

Awesome information! Could this be the cause of the overdrive light flashing? Thanks!

[@justgjt]

Quality info and tech tips. Much appreciated. 🇦🇺🇺🇸

[@robothegreatful]

I hate this video tremendously because his lines up so easily. Literally spent hours on mine with no results. I have envy!

[@todxon1]

Thank you guys. Very very helpful video.👍👍👍🇲🇳🇲🇳🇲🇳🇦🇺🇦🇺🇦🇺

[@khanhpham4347]

Short video but have lot of info thanks

[@MonsterTransmission]

Happy to hear you liked it!

[@crimsonstang]

I had the threads through my flexplate and everything appeared straight and the trans was aligned with the engine but whenever I would tighten (left, right alternating) the housing bolts, the converter would lock up.

[@MonsterTransmission]

Need to check if pilot area is clean and smooth.

[@ZPrezton]

Nice video thanks

[@seshachary5580]

thank you very nice.regards

[@re9473]

Does anyone know if you change your gear ratio on your truck should you install a torque converter with a different stall speed or does it affect your torque converter at all

[@timwhite5637]

Will a E4od converter work on the 4r100 on a 7.3 idi

[@MonsterTransmission]

🔧🚗PRODUCTS USED IN THIS VIDEO: 🚗🔧 Super Duty 4R100 Transmission 2WD - BLACK BEAST DIESEL www.monstertransmission.com/Super-Duty-4R100-Transmission-2WD--BLACK-BEAST-DIESEL-w-Transmission-Cooler_p_6334.html#.XQzoOohKiUk Super Duty E40D Transmission - BLACK BEAST DIESEL www.monstertransmission.com/Super-Duty-E4OD-Transmission-4WD--BLACK-BEAST-DIESEL-w-Transmission-Cooler_p_6324.html#.XQzobIhKiUk Burn Rubber Brewery Transmission Fluid www.monstertransmission.com/Burn-Rubbersupregsup-Brewing-Universal-Synthetic-Cider-Auto-Transmission-Fluid-6-Quarts_p_16640.html#.XQzo4YhKiUk E4OD / 4R100 Torque Converter Heavy Duty 7.3L Diesel Only - 6 Lug - Stock Stall www.monstertransmission.com/E4OD-4R100-Torque-Converter-Heavy-Duty-73L-Diesel-Only--6-Lug--Stock-Stall_p_4909.html#.XQzpGYhKiUk

[@JoinMax]

So you said on Diesel applications its a 6 stud. I have a 2000 Ford Lightning with the 4r100. Does that take a 4 stud torque need a new one but i have no idea which one to get, especially being in Germany where parts are hard to get and noone has a clue about these cars/trucks. So... 4 stud? Maybe you even got a partnumber? That you so so much in advance!! -Max

[@MonsterTransmission]

We can help you out with that converter, contact one of our reps with more info here: www.monstertransmission.com/Contact-Us_ep_5.html You can also check out our Ford Torque Converters here: www.monstertransmission.com/Heavy-Duty_c_3928.html

[@peauxwet]

Where should I buy a stock torque converter replacement? Any links?

[@MonsterTransmission]

You can buy them at : www.monstertransmission.com/Torque-Converter_c_3734.html

[@outcold30]

That cart 🛒 brother! It don’t like that transmission 🙂

[@scarleth2706]

Hi one question why my f350 1997 lock off doesn’t activate ?

[@MonsterTransmission]

If your Lock up Clutch will not activate most likely it is getting stuck and this is a common issue once it starts to come apart the Clutch itself in the Converter will stick not allowing the Lock Up to engage. I recommend a new Converter here is a Link below for some good options. www.monstertransmission.com/Heavy-Duty_c_3928.html