Ford Transit Van Build | Building the Propane Locker

[@mikefranks4528]

you could have laminated it if you just got an angle grinder and grind that little piece of metal from the screws down that was sticking out.

[@Will-el3ps]

Hey is there any chance you could link the parts you used from the propane bottle fitting to the regulator? I'm having trouble piecing it together. Great video!

[@blazingwanderers]

Thanks for watching! Here is a list of the parts we used from propane bottle to exiting the box--hope this helps! We ordered some parts from Amazon and the rest from RV Panther products. They don't see to carry the brass adapters we ordered through them, but you could easily go to Lowes or Home Depot and pick them up there. Marshall MER Type 1 36-48 in pigtail propane hose pantherrvproducts.com/type-1-pigtail-propane-hoses/ Solenoid Lock Off Valve LPG Propane 12V FUELOCK LOCKOFF Liquid Vapor Gas Volt LPG 151 www.amazon.com/dp/B077XQX9YJ?ref=ppx_pop_mob_ap_share Marshall excelsior Megr-298P 2 stage regulator www.amazon.com/gp/product/B01CZ2YU56/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Marshall excesior mounting bracket www.amazon.com/gp/product/B00K24B742/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Marshall MER613-12 LP Supply Hose 3/8" Female x3/8" Female 12" pantherrvproducts.com/mer613-12/ AMC 704018-06 Brass Flare Forged Nut Fittings - 3/8" 9 (ordered 6) pantherrvproducts.com/----not currently available AMC 704044-06 Brass Propane Tee Fitting 3/8" Flare pantherrvproducts.com/----not currently available Marshall ME488 Propane Disposable Cylinder Brass Adapter pantherrvproducts.com/----not currently available MB Sturgis 204163 Propane Elbow Adapter - 3/8" F. Flare Swivel x 3/8" M. Flare pantherrvproducts.com/----not currently available Good luck on your build!

[@Will-el3ps]

@@blazingwanderersyou're awesome, thanks, so much!!

[@hopNglo]

Looks great! What size is your vent hole? I will be using the van in the winter and don’t want to make the locker freezing cold with air coming in through the vent…any suggestions? Thank you.

[@blazingwanderers]

hi there! Sorry for the delay--I was backpacking for a few weeks on the AT! To answer your question-the vent hole size is 1" ID for the PVC, 1 5/8 OD. We haven't tested it yet, but our propane cabinet is inside a secondary cabinet so shouldn't be an issue with cold air coming in (directly). Hope this helps!

[@robertallen6028]

your video could be 1/2 as long and twice as informative if you would cut out all the fluff and garbage. this along with eliminating the stuff about your specific tools which many won't have would make it a better source of information.