Fordson Major Engine liner fitting.

Fitting the liners to my 1963 Fordson Major block.
Tractor is 1955.

[@fishlips2817]

Very nice job!👍🏻

[@MarshallSmart]

Cheers :-)

[@baazigaj9125]

Good info... thanks

[@MarshallSmart]

It's a while since I did that, I have the manual on my KZbin if you want to look at it follow this link. kzbin.info/www/bejne/q2a8nIWcrsyliZo&ab_channel=MarshallSmart. Or if you go to my Flicker where you can down load each page. www.flickr.com/photos/dino60/51365754257/in/album-72157719709246005/ Still have the 4 new single O'Ring liners as I thought it was a 1955 block. Should have checked casting No . M 😀

[@iancorney4077]

Hi, where did you buy the engine rebuild kit from and have you had any issues with it, Thank you

[@MarshallSmart]

You can get them from Agriline or old 20 parts co. Count the seals with liner out. 1953-58 single seal 58 on twin seal. My tractor had a service block fitted so the parts were 55 but the liners were for 63. Have a set of 55liners single seal left over M

[@MarshallSmart]

Agriline supplied the kit. Only issue was the bairings some were scratched. Just bought an other set. Had wrong liners as block was changed 1963 block. M

[@user-fv6zf8hg6x]

Hi Marshall, I bought a Super Major with a seized block due to the oil pickup blocked. It looks like the block has been damaged on the lower end. Do you know where I can get the specifications of the block so I can possibly have it machined?

[@MarshallSmart]

I would try Bundy Bare at www.Queenslandtractors.au he’s worked on a lot of tractors and has a machine shop. You can download the manual from there also Marshall

[@user-fv6zf8hg6x]

@@MarshallSmart Thank you very much Marshall! I will give that a try

[@MarshallSmart]

@@user-fv6zf8hg6x Good luck M

[@mirzabandic2540]

Where to get engine parts for Fordson 592e?

[@MarshallSmart]

This company post abroad this is where i got most of my parts for major. agrilineproducts.com/ford-fordson/fordsonn. Or Mayhill have some parts Agrilline don't www.mayhilltractors.com/fordson. good luck M :-)

[@mahmoudmmm4960]

good

[@jossmartinez585]

que número de motor es

[@MarshallSmart]

Não tenho certeza do que você está perguntando. Ele se traduz para o inglês como o número de motor. Você quer dizer o número do cilindro ou o número do motor? Marshall