Samsung Inverter Refrigerator All PCB Led Blinking Error Codes (1/2/3/5/6/9/11/13 Time)

[@leylandgreaves601]

Thanks to this vidio i fix my samsung fridge

[@girishvasani8307]

Dear sir you have given good information

[@mohomedminhaj2296]

I'm sri Lankan. I don't understand Urudu so this chanel is very useful. Thanks keep it up.

[@amrsaeed798]

Thank you for your explanation. The power pcb is blinking one time, while the inverter led is not blinking. There is light inside the refrigerator, but it is not working. If you can help me, thanks.

[@cookbar55]

Excellent video thank you much appreciated. I have been struggling to fix my Samsung fridge which had stopped cooling. But now using the error codes which didn’t know about I found out what the problem was.

[@SinwookKang]

1회 냉동센서 2회 냉동 제상센서 3회 extra sensor 외기센서 4회 냉동콘트롤 6회 냉장센서 7회 냉장제상센서 9회 냉장콘트롤 10회 inverter pcb 불량 or comp or both 11회 냉동팬 12회 냉장팬 온도콘트롤 1- 1.95k(ohm) 2- 3.84k 3- 5.66k 4- 7.40k 5- 9.08k 6- 10.71k

[@reyanthonydemecillo7809]

7 times blinking

[@abcdabd2783]

Muito obrigado, sou do Brasil, Rio de janeiro.

[@leylandgreaves601]

Leyland one of the best fridge vidioes ever

[@mohimedfarshad4597]

Perfect deching method I really appreciate you sir, thanking you

[@hamadahamed3655]

الله ينور عليك يا هندسه شرحك جميل ياليت تسمح اشرح كارتاات التلاجات والتكيف انفرتر وترجمه الفيديوهات الجميله إلى لغه عربية

[@cassiapersaud7444]

Thank you for the English translation 👍👍

[@forevertechenglish]

You're welcome 😊

[@nuwanrodrego]

Thanks for good information

[@mohimedfarshad4597]

Thank you... really help full me..

[@rolanddejesus8685]

nice video sir,thanks for sharing...God bless.

[@forevertechenglish]

Thanks and welcome

[@mathiasmusoke437]

Thanks so much I did manage to fix the Fridge

[@forevertechenglish]

Great job!

[@pakmuda.pasirmas.3190]

P​@@forevertechenglishthank for information from🇲🇾

[@WebLego]

Title says I will show u all codes.. then in video says I will explain to you 1 and 2 blinks in another video... The codes I need to know

[@eRreAPe1]

Hi, did you solve the 1 blink problem? The same thing happens to me

[@rezahamidimilani]

You are really the best. ❤❤❤

[@mansourghadhban236]

So useful video thnxs more

[@kusnezoff8705]

I have 2 blinks on the IPM board. I didn't find the video for this information. Can you let me know please

[@carlosfernandes7203]

Muito boa explicação Carlos Brasil ✌✌✌😂

[@mohammedyousuf2091]

Thank you for your videos.

[@oscarpaezarce4849]

El mejor video ..... Muy agradecido

[@ramdanesahed9305]

Thank you so much keep going

[@forevertechenglish]

Most welcome 😊

[@embelrapofficial939]

Nice very clear explanation. Thanks

[@forevertechenglish]

Thanks Keep Supporting👍

[@Ashish-oq8pg]

Thanks a lot.

[@forevertechenglish]

Most welcome!

[@mccarthymccarthy4819]

love this video, really helpful you should do more videos in english

[@davidemonzon]

Hello sir. Thank you for your explanation. Lower led blink 6 times and the power pcb don´t have any led. What could be the problem??. The model fridgidaire is Samsung RB30K3210SS / 220v / 50hz. Regards from Chile….

[@abcdabd2783]

E aí, conseguiu descobrir? Sou do Brasil, Rio de janeiro.

[@mehboobpatel7082]

good information but pl give me reply about power pcb blinking five times and IPM pcb blinking continuesly. thanks in advane

[@forevertechenglish]

Dear I will check It And Tell You what does it means?

[@filipemendes2518]

I have 1 flashing strobe on both pcb boards, what could it be?? There is current going through the fridge freezer and I can hear the fan trying to start and it does not kick in the light starts to blink on both pcb boards. Can you help?

[@Go_pro123]

Hi, my fridge RT43H. The IPM light comes one time and goes off..not coming again…no light in main PCB…compressor not working…What is the issue, pls inform

[@cocolove7591]

Hi sir I have a problem with the Samsung fridge when power on you can here the compressor start the led on ipm board light continuously then after 2 minutes the compressor stop and led on ipm flash 3 time. What could be the problem??

[@grigoreman7198]

Thank you.

[@RixtronixLAB]

Nice video, thanks for sharing :)

[@babaolowo35]

THANK you

[@erikaclaire1010]

Thank you for this video, is excellent information. I have a problem with my inverter board. I have a double door samsung refrigerator and the board keeps blinking 1 time. I have already replaced the inverter board and is giving me the same error. 81 C error on the display . I have a new compressor, new main control board but I still get same error code. Do you have any ideas on what could be the problem?

[@forevertechenglish]

Will you please share the model number of the refrigerator

[@rickhunt3183]

was your problem ever resolved? was it a faulty sensor?

[@The_lore_eater]

Hi! I have a Samsung rs265tdrs fridge and both PCB boards blink twice, what does it mean?

[@arielcunanan4994]

Next video please what i mean part 2 of samsung inverter freezer

[@shaystar9347]

thank you

[@forevertechenglish]

You're welcome

[@sreejusree4368]

Nice really helpgull

[@forevertechenglish]

Glad to hear that

[@babaolowo35]

Thank you

[@forevertechenglish]

You're welcome

[@RickyMandes]

Ok thank you for the information how about when I switch the power on pcb light comes on and off and nothing happens what would be the problem

[@leonardblake1930]

I need to know testing an heater area code for heater what's a normal reading for the heater

[@muhammedaflah7920]

At the normal working(refrigerator in good condition) of this refrigerator the LED in smps board will glow or not?

[@Xtracurricular]

I Just find One blinking LED at both of PCB when I am connecting wire to electicity, after that nothing any blinking, can you tell me about this problem ?

[@ignaciotorres6037]

Where can I get the technical manual to see all the faults of a Samsung rt35 refrigerator

[@charradrepair]

Good job ❤

[@hussienhamid867]

Motor doesn't get normal current(no passage of current)...ipm PCB light continuously blinking but power PCB hasn't light at all. So what is the possible solution?

[@conradogoodwin8077]

¡Gracias!

[@forevertechenglish]

Thanks

[@Skeptic-f1n]

Your the king thank you 😘

[@forevertechenglish]

Thanks for your valuable feedback

[@ramilabraham1906]

Hello sir. Lower led blink 5 times and upper led blink 2times. What could be the problem??

[@jaykugee2612]

Hi, very informative set of videos. However I can't feed a solution to my. When I switch on the fridge it with normally for about an hour then IPM PCB let goes off and the power PCB turns on and blinks continuously and is also shaky. I have already checked the inside sensors and they are fine, can you help ?

[@forevertechenglish]

Yes I can help!!!

[@jaykugee2612]

@@forevertechenglish cool. what migh it be and how do I solve it ?

[@kennethigweh]

Hello,pls I have similar issue with my Samsung inverter fridge, how can I solve this problem ?

[@kennethigweh]

@@jaykugee2612pls what’s was the solution?

[@kennethigweh]

@@forevertechenglishpls what’s the solution to this continuous blinking error code?

[@bobbie3064]

I have the RT18M6215SG/AA, and my PCB board doesn't have a light or even that actual part, how do I test it's power?

[@yaseen3950]

Sir i have the same model fridge,but the led is glowing once n going off again,but the fan is working fine and compressor isn't starting

[@forevertechenglish]

Check The IPM Board..

[@RanTausi]

​@@forevertechenglishHi, I have a problem, the led on the IPM board is always blinking, the compressor is not functioning. What could be the issue ? Thanks

[@darrylpacson3932]

What is meaning different code. Can i copy your code?

[@stallinpereira7451]

-17 degree light is blinking only. What may be the cause?

[@shokieML]

Not blinking but the Compressor is Not Running

[@Ultimaniacx4]

My mainboard light is solid red, not blinking at all, but my Samsung tech said there's a problem with it and they can't fix my fridge under warranty until they replace the mainboard but the mainboard isn't covered. They're charging $500 to replace the mainboard. Is this normal?

[@vajaynunthandass676]

Can we get video on countertop freezer

[@forevertechenglish]

Well if I get one, for sure!!

[@leylandgreaves601]

I change fan cut wires fridge still not working i believe wires need to be soldered and cover

[@bilalkhan-zk9hw]

Nice vedio❤

[@maryamebadi9906]

Exellent

[@forevertechenglish]

Thanks

[@Virtious_Mind_Spirit]

What does 3 blinks in the first pcb board mean?

[@mccarthymccarthy4819]

Hi can you tell me how to force a defrost

[@AAMD565]

Overload 🤔 in inverter refrigerator 10:07 .. plz explain that🤔

[@cafsjbeto]

Minha samsung rt46 não parte o motor, ele tenta dá uma tremida mas não segura, o ped da placa inversora pisca 3x e para, fica repetindo. No painel frontal pisca 3 graus. Depois de 3 ou 5 minutos ela tenta partir o motor de novo do mesmo jeito mas não segura.

[@ramos_dt]

Can we force the ipm pcb to run the compressor without needing the main pcb?

[@forevertechenglish]

I have Already made A video on this topic dear..

[@ramos_dt]

@@forevertechenglish I have seen the video. Nice tutorial by the way. I have one question. At what ratio of the potentiometer does the motor run at full speed?

[@potienkalala5113]

Thx for this video

[@forevertechenglish]

It's my pleasure

[@burhan-00]

رائع جدا جدا جدا جدا جدا جدا جدا جدا

[@luciadal-cin8787]

my rt18m6213sr has no led on the power pcb (right side) is there any way to get a code? freezer, fridge and condenser fans are running. no cooling anywhere what so ever.

[@Mr1151959]

السلام عليكم ورحمه عندي ثلاجه ال حي كل ما اشغلها تفصل مباشره وتعطيني على الكرته 6 ومضات،.يعني ضوء اللد برمش ٦ مرات ما هو العطل لوحة الثلاجه فوق الثلاجه والوميض في اللوحه اللي فوق الثلاجه نوع الثلاجه lg

[@PranjalKumar-f9f]

Power PCB blinking 5 times and IPM board LED is on then what is the error?

[@lun4ticox]

Please my error is 7 blinks from pc board, Pcb inverter and motor works after 10 minuts

[@1stWorldProblemsSolved]

How can I get codes there is no LED on my model? Is there a diagnostic port of any sort?

[@chizad128]

I had rt43 blinking 7 times, i replaced fridge coil sensor and it went away.

[@oussamahe1819]

Thank you for the video. I have a Samsung Inverter Refrigerator, which is not cooling and the PCB led doesn't blink. I have the one of the ipm PCB glowed then blew out and then began to glow continuously. But the refrigerator is not cooling inside the refrigerator section (the freezer section is cool but not like before), and the sides of the refrigerator are very hot (usually they get warm, not very hot). Please, could you tell me what is the problem and how can I fix it? Thank you in advance.

[@washerdryeradvicechannel8041]

First of all if your compresor is always on and the freezer not under 10 degrees then either you compresor is bad, it needs freon or sistem might be blocked

[@KelvinWilson53]

Replace the sensor and the fan . That's what I did a week ago and ref is now working fine got the sensor and fan from Lazada.

[@husseinalwy4870]

Did you fix your issue

[@derekp13]

If this was split up it would be much more useful.

[@forevertechenglish]

Thanks for the valuable Feedback

[@farhanhassen884]

My samsung fridge Top LED is blinking ten times and down LED blinking 2 times, (what is the fault) If I on the fridge it is working properly and after freeze it is auto stop, when the temperature reduce it will not rework. Pls let me know what is the problem.

[@PranjalKumar-f9f]

Power board LED is blinking 5 times and Inverter board LED is on, then what is the error?

[@munjidshihad]

Fan is working but pcb 11 time blinking why

[@محفوظعبدالله-ص5ف]

اذا كان تومض اللوحه الصغيرة 5مرات فقط ايش يدل هذا العطل

[@Jasmehakishu]

Please help me. I have Samsung double door refrigerator and today it stopped working. Model no of my refrigerator is RS21HSTPN1. The LED is continuously flashing on SMPS PCB. There is NO LED on another Power PCB. I see some oil spillage on SMPS PCB. Capacitor C101- 450v, 220uf is slightly bulged on top. SMPS PCB no is DA41-007823, LC3- SMPS. Fuse is ok.

[@forevertechenglish]

If the capacitor is bulded it could be faulty.

[@RishiTammireddi-v2g]

PCB 8times & IPM 3times blinking what is the problem

[@cezmen]

Hello. The lamp blinks 11 times. How can I fix the problem with the fan? I replaced a new fan but it doesn’t work. What else I can do?

[@forevertechenglish]

Problem could be in the control board, check whether the wiring is disconnected, if not then it is the circuit board.

[@cezmen]

@@forevertechenglish thanks for the fast answer. Which one is the control Board and the circuit board. I controlled all wires and think they are connected. What else I can do?

[@tonijohnson09]

What about flashing 4 times on pcb and no start from refrigerator?

[@forevertechenglish]

Is it the IPM board or the Main board flashing 4 times.

[@tonijohnson09]

​​@@forevertechenglishIPM/PCB board. I found two sources that attributes this code to locked compressor.

[@alimounzer5853]

اللمبة تومض مرة واحدة ثم تتوقف بشكل دائم ما هي المشكلة

[@Pavlos.Filipos]

The Samsung freezer shows me a temperature of +10 °C on the door, it beeps, but everything is fine inside - it freezes. But what is strange is that the defrosting body around the exchanger is still warm. Would you know what to do with it?

[@forevertechenglish]

Which defrosting body, can you elaborate further, so i may clearly understand what are you talking about, so that i can help you out

[@Pavlos.Filipos]

the translator translated it wrong Heater defroster If I unplug it, it still shows the wrong temperature, even though the freezer is at the temperature I set.

[@Pavlos.Filipos]

Heater defroster If I unplug it, it still shows the wrong temperature, even though the freezer is at the temperature I set.@@forevertechenglish

[@forevertechenglish]

@@Pavlos.Filipos ok I think it could have these possiblities, one the heater defroster could be faulty, second the display could be bad, third something could be wrong with the circuit board, which is why the display is showing the wrong temperature, but not what you had set

[@forevertechenglish]

@@Pavlos.Filipos one other thing i think the circuit board is not able to switch off the defrost heater after it defrost the Ice, It works continuously which is why it feels warm. THAT IS WHY THE temperature is shown wrong. Means somethings bad in circuit board

[@leylandgreaves601]

I have np codes fridge working but not getting cold guess it need recharging

[@bongmontano4213]

Mine IPM pcb no light no blink. But evaporator fan os working.

[@forevertechenglish]

The PCB board could be Dead Means no Power In the IPM Board

[@bongmontano4213]

@@forevertechenglish hello sir what's the cause of the IPM board to be fail? Why evaporator fan is working fine and also the light inside but sometime flicker.

[@bongmontano4213]

Is the power PCB good sir? Because fan is working fine.

[@mdalamin-fu3co]

7 times light blinking what problem?

[@rickhunt3183]

The engineer that designed these boards must have used captain Pike's wheel chair as a model. One blink for yes two blinks for no. This kind of design work is crap. I would fire the engineer. Is this the level of work Samsung considers acceptable? The core mechanical systems are probably fine, but the electronics looks like it was designed by a high school kid. It's an insult for Samsung to demand a high price for this junk. A refrigerator at this price point should last 20 years. I bet this junk doesn't last 5 years. Samsung is hurting their own name brand. This is how you lose customers.

[@heraldgarcia6908]

12 blink sir how?

[@danielwilberforce7400]

My Samsung refrigerator flashes 12 times, then flashes 7 times. What is the fault please? You haven't got it listed.

[@forevertechenglish]

well, its not listed because the fridge in the video i showed didn't showed this error. Well will have to figure it out what does this error means

[@SafeSafe-c9i]

Goods

[@lasanthabandara7455]

My refrigerator power pcb 5time blink what this error

[@forevertechenglish]

Well will have to check what does it means

[@brsrao3306]

My compress wire was eaten by ants, and its short ciruiting , how to change the cable from board to compressor terminal

[@forevertechenglish]

Oh Man that's so sad, You can use new wire for it replace the old one and use the same connectors

[@Callistoitalyanboya]

Merhaba,pvb LED ışığı 12 kere yanıp sönüyor!neden olabilir?

[@forevertechenglish]

Which board is it, the power board or the IPM board?

[@Callistoitalyanboya]

İpm kartı

[@mangajunior3041]

I am having a problem with my inverter Samsung double door refrigerator...I bought it from the shop with no gas inside so when I try to recharge it back with gas it will work but in 10 to 15 minutes it's will stop... please call someone help me out

[@forevertechenglish]

Does it shows any error on the motherboard?

[@hamidabadi8368]

Hallo do you have pdf notes

[@forevertechenglish]

No I don't

[@wanhafiz8610]

Sir 7 blinking wht problem

[@forevertechenglish]

Let me check

[@wanhafiz8610]

@@forevertechenglish ok

[@AAMD565]

Overload.. 🤔 inverter 10:07

[@JoelFrigo]

C'est possible de ne traduire ça en français svp ?

[@sumonzaman7048]

ipm ar number please