FORGED IRON SET FOR $589 // Takomo Iron 201

[@peterthanasse1321]

I own a set of the Takomo 101 Irons. I bought them after seeing Ian hitting them on the channel. I had been looking for a few years for replacements to my Ci9's and one of my main issues with a lot of Game Improvement irons I had tested were the inconsistency off the face. All of them seemed to have these "flyers" that would suddenly take off and go 15yards longer than they should. This is not the case with the 101 irons. They were consistent in spin and carry when Ian hit them and they have also been consistent when I hit them. It would seem from the numbers on these 201's that they are, again, happily consistent in both spin, carry and launch, so Takomo is doing something right with their process that is making them a reliable club. I think I can speak for most golfers that I would rather have a 7i that consistently carries 150-155 yards on a good strike than a 7i that will sometimes send it 165 yards on a that same good strike. If I did have one thing I would like to see it would be that, considering the lofts, I would have loved to have a 5i - GW option over the 4i - PW option. With a 44 degree PW, I would rather have a 48 degree matched Gap Wedge over the 21 degree 4i. Other than that, I am 100% happy with my 101 irons and will be gaming them the next 10 years most likely if they wear well. Cheers! :)

[@illytree]

great to hear.. I ordered mine when they restocked gonna be a while before they show up, but I can't wait!

[@jeremybrown9636]

I had the exact same experience moving from a set of 2016 m2 irons which flew just too far. Pitching wedge was 165y, 5 iron was 240-250y and there was absolutely no saying whether they’d then fly an additional 15y and ruin a hole. Switched to a set of Titelist 710 MBs for $300 aud (~$225 usd) and took 6 strokes off my handicap almost overnight just because of the confidence gained in the distance control.

[@3rdgroove]

Yeah, the 48° GW, or the wedge formerly known as PW... 😅

[@canyonaro]

@@3rdgroove thanks none of us knew that 🙄

[@3rdgroove]

@@canyonaro Apparently the manufacturers don't know it. What do they care if you have a sizeable gap in the scoring clubs?

[@aaron_b.]

Takomo adding another set to the spectacular range of DTC offerings available, what a great time right now for the budget-conscious golfer

[@markdevlin8436]

They also do a "head only" option for those happy to build their own. The only downside of this was that the lie couldn't be pre-adjusted as the heads come from a warehouse opposed to the full sets coming from a factory. Still an incredible bargain!!

[@BillytheCon]

They seem such great value. I’d like to see a comparison with other similar DTC clubs, like a Sub70 699

[@aarondrossart6026]

I have some PXG xcor2's, but the 101, 101t and 201 are INCREDIBLE values. I have a friend that I just went to pinehurst with and he played 101's and absolutely loves them. Thanks for giving more exposure to these great value DTC brands!

[@wallstreetoneil]

James Robinson has actually kept these in the bag he seems to like them that much. Good on Takomo for offering such value - really incredible actually.

[@krusher74]

its not incredible .That's how direct to consumer works, you cut out the shops and their profit.

[@jalalalap-akalala]

Do you know if you can get fitted?

[@MattSwanson]

@@jalalalap-akalala I actually emailed Takomo to ask if they were available anywhere for fitting, and they replied saying that they are not currently, but that if I knew of any local shops who'd like to offer them for fitting, they'd be open to it. I don't, sadly, but it makes me want to try them out - my only hesitancy is that as soon as you customize there is no return available.

[@if829]

@@MattSwanson you would not loose much in the current market, if you didn't get on with them , golfs in a purple patch just now

[@lindsaynewell6319]

My 4i is collecting dust in the shed. Ian's 4i is collecting snow as it drops from 109 foot apex at 47 degree land angle from 220 out. Sigh. Matty the bomber gets a lot of well deserved recognition on the channel but Ian's long iron game is an underrated thing of beauty. These DTC tests are really interesting - I haven't even heard of most of the brands and have no understanding of what shafts, lie angles etc suit my swing so would have no clue what to order (I've used the same stock, off the shelf x16s since ~2005).

[@carl3831]

I have ordered a set of 101's, trying to find a set of 2nd hand clubs for a decent price here in Australia has been very difficult, iron sets 10+ years old selling for $500 AUD, the 101's with +1" shafts and mid size grip and shipping to Australia was $710 AUD ($530 USD), it was a very easy decision to make. I will add regarding your lie angle comment, i was also concerned about lie angle, i havent played in 10 years so all i knew was i need +1" shafts and larger than standard grips. I sent Takomo an email asking whether lie angle could only be set by them, they replied and this is not an exaggeration in 4 minutes advising the heads are soft steel and can be adjusted by a club fitter / repairer etc after purchase.

[@mjheggie2]

What would you say is the biggest difference between the 101’s and the 202’s? Can you show them side by side for a size comparison? How much of a forgiveness factor difference between the two?

[@whiskerrub3821]

Thanks for the review … winters coming and the off season for a lot of us, nice to know TXG content is going to be there! 👍 TXG Podcasts with Mikey/Ryan perfect listening for raking leaves and shoveling snow. 👍 Keep up the great work!

[@hardy377]

I would love to see a bracket on affordable irons like these, sub 70, Ben Hogan and etc

[@biggregg5]

I'm not affiliated with Golfworks in any way, but check out my post. I bought a set of the Maltby TE forged irons, and am thrilled. Love the feel and they are very inexpensive. I still am interested in all the other DTC brands....for some reason I want to stick with the smaller guys, but the clubs are worth looking at.

[@bradleybiederer8796]

I would also like to see this. There are quite a few coming out and they all look great.

[@takl23]

I play sub70 and think the term “budget” and “affordable” needs to be dropped on most of these offerings. I’ve had mine for over a year and haven’t even thought of changing. They’re that good, price be damned.

[@milothemarauder]

@@takl23 Considering how expensive mainbrand clubs are, they are absolutely budget brand. I have the 649MB and they 849 Pro driver. Absolutely love them.

[@takl23]

@@milothemarauder budget gives the impression of cheap. I have several hundred rounds and range sessions on mine. Still performing great.

[@RossLawrie]

Fantastic... Fedex are due to deliver mine today and looking forward to giving them a shot - although my handicap is around the 20's so not quite where you guys think it would fit. Will let you guys know how they go but I'm quite confident they are going to be better than my current package set (that are too short and don't lie right)!

[@SmokeybeardAB]

I'm in the same boat as you. My handicap is higher but I'm a good iron striker and love the feel of forged and just need a bit more distance. I'm sure these clubs will definitely help us lower that HC

[@MattSwanson]

Ross - super curious to see what your experience is with these, as this describes my game as well. I'd love to have something super consistent (my Sim Max I get a lot of shooters that go 10/15 yards further than my "normal", and completely out of nowhere). Let us know what your takeaway is when you hit them? Thanks!

[@Mytro34]

so how did you like them?

[@RossLawrie]

Been great and cannot complain. I'm launching it quite high but that's probably me, and my HCP is slowly coming down. When I hit it right they feel and sound amazing!! I'm still probably a bit high in handicap for them but my ball striking is getting beter!

[@Mytro34]

@@RossLawrie that’s greAt to hear! What shaft did you go with and have you been fitted before?

[@gaopronove4633]

I game these irons now and I've never played better. Forgiving but with control. It's nicely balanced with more traditional lofts as well. I changed the shaft and put Matrix Program shafts. Got some better distance and control.

[@TripsView]

31 in a seven and 44 for a P is far from traditional. I’d like to see if they’d bend them to 33 at the 7

[@iandevilliers8771]

Looks like a Ping i200. It can't be bad with that general kind of design. I like!👌

[@DrFugue13]

I just got my set yesterday with KBS C-Taper 120, 3 degree up, +0.5 length, Lampkin midsize (my index is 6.2). They feel great, perform great. I'm coming from PXG Gen 1 (lofts are basically the same, and the other specs are identical) and I like these better - so far :) - they certainly feel better when I flush them and I don't seem to have lost any forgiveness when I don't. That said, I've only hit them on the range twice (with launch monitor) so no course data yet :)

[@Josh-McKeown]

Where did you find the option for the lie angles? I don’t see an option on their website to adjust the lie

[@DrFugue13]

@@Josh-McKeown when I ordered there was a "custom" option. you can't return them if you do that but I wasn't planning on it :) I just looked, there is a "customize your order" link right below the add to cart button

[@Josh-McKeown]

Yes buddy I found it, that’s an added bonus, you get the 201s?

[@DrFugue13]

@@Josh-McKeown Yes, I got the 201s. Delivered last October as I recall. Been gaming them ever since and couldn't be more pleased. The low cost just makes it that much sweeter as thus far I can't tell a difference in quality compared to any of the big boys. My index has dropped with them from 6.2 to 4.2. So they aren't hurting my game either :) one correction I would make from my original comments above is they are slightly, and I mean slightly, less forgiving then my PXGs with stikes off the toe, but that is to be expected for a CB compared to a hollow body. and again, I can't even tell you how much better they feel when I flush them.

[@tms299]

Just got my set of 201s and going to hit them tomorrow. Almost don’t wanna hit them with how good they look.

[@rolandmoore9527]

These were already on my shortlist, now at the top for next season.

[@naj959]

Just got some Ptx Pros but these are on my radar now for a backup set!

[@TheTommy84s]

When will you guys be testing the takomo 301 series, really curious about those

[@thegolfingmusician6345]

If I was in the market for new irons, these would be on my very short list. In the meantime I’ll stick with my Honma TW-X irons purchased based on your review fellas. Keep up the great work!

[@cksamo]

And if you really don't like the shaft options, you can order club heads only.

[@DavidSmith-lo7wf]

Was kind of wondering the same thing for those who are particular enough to need that.

[@alexchoi2060]

The only issue I have is Takomo is that they won't let you drop the 4 iron (and say, add a gap wedge in place), it is 4-PW and nothing else. OTOH, Sub 70 allows you to do that. With loft jacking, my first iron is a 6 iron and I hit a 5 hybrid much better than a 5 iron. As a 9 HC, I probably would lean toward the 101s since iron play is not my strength.

[@Big_J]

Same problem, my longest iron is 5 and it's loft equals their 6 iron in 101 series, so little unsure if I could benefit from those longer 4 and 5 clubs... would rather see 5-gw or even 6-sw

[@oscarbonnes9133]

Love this brand and the products they put out!

[@grewk2518]

Looks exactly like the old new level 902 forged.

[@michaelsnakebite4707]

When looking on webpage today, specs are not same as in your video.?? Have they changed it, or a mistake??

[@taylorleopold9040]

Love that you guys are playing #9 at the Farms! Great course.

[@MrJay1986]

Great review guys, 201's look amazing!

[@scotthansen4692]

Reviews like this are making want to buy new irons. :)

[@MrAhuraMazda]

Every time Ian talks about his dream iron set he literally describes the Nike VR Vapor Pro Combo

[@dw4421]

I wonder if TXG is interested in testing club sets, like the Callaway Edge, Cobra Fly XL, or the TaylorMade RBZ SpeedLite set. All cheap package deals aiming towards beginners or returners of golf

[@16-bit-trip5]

It probably wouldn't be that interesting. All they would end up saying is they are fine for what they are and a good option for the market it's intended for, just like every other channel that reviews them.

[@-Thunder]

To me the obvious set to create is a players set for slightly slower swing speeds. More help on the long irons and generally less offset. I'd be curious at what club the cavity back becomes almost irrelevant. In my testing it seemed like an 8 iron blade vs. cavity back wasn't much different in performance. Might be a good test if it hasn't been done. Might vary with swing speeds.

[@Tywithay]

Looks a lot like the 902 from New Level

[@D_KimRaiders]

Great! I was waiting for this test and video. Definitely has caught my eye for my skill set.

[@johnk.atchley5079]

Would be interesting to see the results if you used the same ProV1x ball with this iron as you did with the 101. Compare apples and apples. Or with that ball and this one if the ProV1x resulted in too much spin.

[@gregbarthjr9621]

Thank you guys for testing these. I'm in the market for new irons. I'm very curious how these compare to the Sub 70 639cbs? Thanks, keep up the great work

[@rickcudmore8156]

These irons look great, hopefully they will have a left hand model available.

[@biggregg5]

I'm curious if you guys will consider doing a review of the Maltby TE forged irons. I promise that I'm not affiliated with them in any way, but I bought a set....6-gw and had them assembled for me since I'm taller, and need them customized. 2 deg. upright and +1.5 length. I bought with the UST Recoil stiff shaft. They have the fairly thin top line, but perimeter weighting, and are very easy to hit. They are an older design, and have no new technology, but after hitting them, I had trouble understanding how the club could be better. They are the cheapest forged clubs I have found anywhere....and I'm pretty sure are a true forging. For 6 clubs....assembled to spec with tried and true graphite Recoil shafts, only about $350. I'm a bit of a club junkie, so nothing is going to stop me from trying other clubs, but these really surprised me, and I wonder what your thoughts on them would be....good or bad.

[@steveadair7942]

I have the 201s and love them!!!

[@M82RKY]

Yes!!!!! Thinking about these in my bag

[@PetSKi67]

Is there an influence on the numbers according to which club is selected for the software? I think, I noticed FWY 5 instead of 4-Iron.

[@dologrove764]

Thanks guys, really interested in these clubs

[@guesswho9901]

Definately interested in these guys even though I'm a higher handy cap (20hcp). My swing speeds match the given examples. Good work brothers. Keep up the excellent content !!

[@normlang1994]

It's great that there's no upcharge for custom lie angle, but it does eliminate the option of returns/refunds. In order to be eligible for a refund, you have to return the product within 30 calendar days of your purchase. The product must be in the same condition that you receive it and undamaged in any way. Return policy for iron sets The full set of irons must be returned. You are allowed to use the 7 iron as a test club, but it can not be damaged. In order to receive a refund, the rest of the irons must be returned unused and in brand new condition. *Any custom-built sets of irons or custom iron heads are not eligible for cancellation or refund.*

[@lavrentievv]

Less offset, and I'd buy the CB right now.

[@gh4121-b5n]

Beauty looking irons. Way to put the heat on the Bigs and their sky high pricing.

[@gbiscuits]

I am saving up for the 101s

[@ronniekilburn8567]

I am returning to golf after several years out of the game. My Taylormade set was stolen and I have purchased a used setup. What would be the recommended set, the 101 or 201?

[@if829]

the 201's will last you longer as you get going, but in fairness either is a great starting place , go with what pleases your eye most & Enjoy

[@Simplycomfortfood]

This is a set that I am seriously looking at. Do you have a friend that is about a 19 handicap that could hit them and look at the numbers.

[@lifesriddlespodcast]

Is it an option to take the heads into a fitting shop and have a bigger selection of shafts to choose from?

[@waynepark4430]

That was excellent 👌.

[@adrianjackman9422]

Both look fantastic value for money, just not sure I could buy a set of irons without at least hitting them. Not sure how you square that circle when the DTC part must be a big part of the cost saving.

[@dwayne5530]

Don't know why but that nick on the club stood out to me 🤣 Top line is too thick for me. At first look I thought it was a TaylorMade iron

[@if829]

The nick shows how soft they must be, nothing a file can fix and a wee polish for the top line

[@waynebrown4062]

Bought them. Now to play.

[@johnk.atchley5079]

Have you tested the Takomo 301 cavity back and 301 muscle back?

[@goje_022]

I think a lot of people will want to weaken those shorter clubs which could negate some offset

[@martinpedersen7785]

hey guys first thanks for the great videos ... i have a question ... how big is the difference between the takomo 201 irons and the srixon zx7

[@XhenriJPX800ProX]

It is not possible to order a combo set from 201 and 101t........really a shame.....sorry

[@Anttaa]

Great review, not sure which model to buy though... Decent ball-striker (20hcp) one year into golf, maybe I can get the 201´s and put in some work during winter. Feels like the 101 could be to much a beginners iron but not sure where to draw the line here?

[@SmokeybeardAB]

You sound like me. I'm a good striker and have no problem getting the ball in the air. I ordered the 201's because I dont need crazy distance that the 101s would give.

[@rufussthoo4083]

The top line a bit thick and the offset a bit much for my liking. And I agree with Ian re the wedge's heel height. But after this review I'm keen to see the next version.

[@justinmonroe8279]

Do you have a link to the 101 review? A search isn't finding it.

[@ProspectingLife]

Have the boys done the 301’s yet?

[@BB-gd5pk]

How do these compare to i210’s? Forgiveness? Distance? Etc

[@spyates2]

Did you prefer the Takomo 201 or the Sub70 699 Pro?

[@ipotato95]

Unrelated but can you guys review the Wilson wedge on Amazon? It’s a big seller and dirt cheap

[@TTT-Turbo]

Someone could buy these and change there shafts into them. Then sell new pulled shafts from the new irons. They look great and I've seen a couple of guys on here review them. The 201 look a bit like the Honma 01 cavity range that I had. 👍🏼

[@jalalalap-akalala]

Think the sell head only

[@TTT-Turbo]

@@jalalalap-akalala yeah they do!!! Went onto the site and noticed that too after watching James Robinsons video they look great.

[@ronburgundy8174]

I got fitted for a set of Mizuno JPX921 Hot Metal Pros in ProjectX LZ 5.5 shaft. How would these compare?

[@keithporee7206]

Great review guys👍

[@Fernczy]

Hey guys love the channel, you 2 provide a lot of in depth data driven results. Thusly why inhave to ask about these. How would you compare looks of this club. What does it remind you of. I play Mizuno MP 18s and I'm looking for new irons. I am a 6.7 handicap and would love a players iron similar to my mizzys but with some forgiveness without sacrificing appearance. You and other have mentioned how good these perform and they look decent. I don't want s club with a thick top line and huge offset either like yourself. Just trying to get more info, thanks.

[@dabaumga]

The Takomo irons in this video would be quite different from your Mizuno MP 18s. Different category of irons.

[@pato7694]

Excellent review.

[@marie-evetanguay5609]

Would you recommand for a 16 handicaper

[@chrisrose8175]

I'm looking to purchase a set of these but want to make sure I pick the right shaft. Where and what is the best way to check which KBS shaft I will need in the Glasgow area? I recently had a mizuno fitting just to see and I needed a stiff shaft and 2 degrees upright on the lie angle. Do you think it would be same for the takomo? Thanks

[@gregwilliams2066]

Can you compare this to sizing of srixon z5 or z7 and to be level 902?

[@Jake4211-]

They look like the Srixon ZX7s with out the toe weighting.

[@brucekristich4073]

as a 10 HCP player these irons look perfect to me, but i can't see that offset, messes with my eyes too much and i just can't set-up. whats wrong with me?

[@scottmasker4389]

Would you guys recommend these for a 5 handicap?

[@hansidelk6604]

Will KBS tour 90 in stiff feel softer than KBS tour regular (which for me who normally use stiff feels pretty stout for a regular)?

[@paullarosa11]

I still think the 101 is a very beautiful iron. More so than the 201

[@jamesohlson1633]

How do these compare to the Sub 70 699's?

[@Gunner93_og]

How would these clubs compare to the forged zx5's? Anyone know?

[@pebblebeach65]

Does anyone know what the shaft weight is, Regular vs Lite? I’m not sure what one to order.

[@ianstyring9602]

Guys, can you post the review of the Callway Apex UW before I buy a super hybrid. Thanks.

[@ericbradner6986]

I was hoping today would bring the Apex UW review too. Really eager to see what they thought.

[@dabaumga]

I believe that review is coming soon.

[@jimhowell4282]

I am looking forward to purchasing these irons. I would like to blend these though. PW thru 6 iron in the 201"s and 5 and 4 iron in the 101"s. Can you help in the contacting Tacomo to see if you can Blend????? The website does not seem to allow

[@if829]

Takomo are on Face-book and Twitter with recent posts

[@jcstreck74]

There is also a Contact Us page on their website to send them a note.

[@Mytro34]

Really torn on the Takomo 201 and the Haywood CB. Can someone please help me decide? Im going crazy lol

[@DocWilly77]

These look like the exact same irons as the New Level 902 Forged irons, with just different milling. I have the 902 irons so I can tell. They must be produced from the same factory in China but for Takomo instead.

[@callmecamo2]

I would be curious how durable these are considering the scuffs that I noticed in the close ups. I had a set of Sub 70 639CB that I loved but they were so soft that sand would put dings in them. A real shame.

[@TMar1961]

They are soft, invest in iron covers.

[@Cmanns05]

That's what happens to all forged irons unless they use boron. Can't have a soft feel without the repercussions...

[@if829]

@@TMar1961 AHh the MY golf spy Iron cover Police will be out after you speeding up the 18th , yes cover keep any clubs better and that meads trade in value as well

[@TMar1961]

@@if829 lol, I'd always thought of them as overkill, only for use by golf bling people.... until now finding them actually useful

[@if829]

@@TMar1961 happy to get slagged if it keep $/£ in the pocket , maybe my golf spy will sell a set yet, normal punters pay for their kit and need to keep it good

[@tomrowellathotmail]

Are these good for beginners or more suited to lower handicap players?

[@arne3045]

Improvement irons, so more suited for mid handicappers. So around 10-18hcp.

[@tomrowellathotmail]

@@arne3045 ah no good for me I play snooker

[@pettersundberg3825]

You guys reckon i would be able to handle these as a 25 hcp? Aiming to get down to 15 this year (Started over after 15 years break last seasoin. Played a bit as a teen) or should i go for 101? Dont want to have to change next season you know..

[@lukeabc]

did you ever get an answer to this?

[@pettersundberg3825]

@@lukeabc Not really. But I have them now and even though they are quite forgiving i would probably go with the 101 untill your about 15 hcp. I lost my swing completely this year and that has made these pretty hard to play with

[@lukeabc]

do you think the 201s wouldn't be suitable for a new player (mid 30s?)

[@pettersundberg3825]

No. Def the 101

[@DLudGolf]

Very excited about these, trying to win them in the instagram giveaway

[@mattstrmec]

That’s a PING S55, no?

[@jasongianginis]

I love them!! Send them to me!!!

[@rybry5080]

these vs Ping eye 2's

[@Hood373]

Pretty

[@rl2694]

hopefully this flies... good design... lot of marketing... but business behind owners just 0.5m USD/yr.. does this fly with just SoMe advertising... NicelyPacked..;-)

[@paulkellygolf]

Are these prices in Canadian $?

[@ryanbarath1916]

We quote prices in USD

[@SmokeybeardAB]

The set as is to Canada with duty and tax is around $850 CDN

[@michaelwikerud4149]

The 4 Iron was set as a fairwaywood on the launch monitor... how much does that affect the numbers?

[@ianfrasergolf]

It doesn’t impact the numbers at all. There’s no guessing with GC Quad.

[@michaelwikerud4149]

@@ianfrasergolf thanks for the information 👌🏻 love your content and learn a lot from it! Keep up the great work 👍

[@SamHolding]

Does anybody know where the company is from? I know the name comes from the Finnish word for a forge, but can't find anything confirming the company is actually Finnish (which seems unlikely in itself :D ).

[@deviusfeilds]

Their Facebook pages shows many videos recorded in Finland, but the contact details online don't include a physical address.

[@SmokeybeardAB]

I think I read on myspygolf their head quarters is in Finland but I believe the heads are from japan and shafts and build are done in China

[@deviusfeilds]

@@SmokeybeardAB there terms and conditions mention that the applicable legislation is Finish which is highly indicitve of a company operating in Finland.

[@SmokeybeardAB]

@@deviusfeilds I am aware of that. I was just stating what their rep said on MSG and just wanted to relay their post

[@jvws94]

Look great but I’m confused as the whole point of a lot of your content is getting properly fitted for an individual player esp with the right shaft and there is no option to do so with these clubs is there? Seems against the philosophy. Otherwise they look interesting.

[@clubchampionmedia]

We discussed that in the videos as the down side of these clubs.

[@russwilliams2657]

So Im left wondering are these good irons or not? I hear you say these a good for the price. Does that mean they are only good at this price? And not as good as big $$$ irons

[@jcstreck74]

I’m pretty sure I heard Ian say there were good at any price. Which to me means they’d fully compete with those 2-3x their price.

[@martinwilliams4759]

Can you please test the pro v1 left dot ball please

[@grt-rt4dh]

Showing a 6 iron while talking about the 7 iron.

[@martinpedersen7785]

it looks a bit like srixon zx7 or is it just me?? 😃