Forging A Knife From An Allen Wrench

[@antoinestrouzas1335]

You're the best knife maker! Congrats Sir! Greetings from Athens 🇬🇷

[@jaylark6528]

Really sweet knife! Clean lines, and the warp you are worried about gives it personality.

[@tikataka11]

Jake for me this is your best work ,clean ,beautiful ...................respect and Cheers

[@ScoutsIX3]

Another gorgeous knife Jake! Absolutely spectacular

[@duanedotson1529]

Once again I'm impressed. I had a thought of rounding out the Allen before shaping the blade, but keeping the style was awesome. Keep it up dude! Can't wait for the next one!

[@SamsuriAW]

I just bought the same wrench from a flea market. I’m glad to know that it’s a good raw material to make a knife 😅

[@lesterj4394]

You make some great looking knives. this one would look great carving a thanksgiving Turkey.A suggestion! you should make a set of kitchen knives from old tools!

[@mjkhan9664]

FINALLY someone else decided to make one out of this. There was literally only one video of a guy who made a knife out of an Allen Wrench. Also youve gotten really good at forging cause tgis blade looks awesome. Keep it creative

[@steersman-zv2ng]

Very elegant and nice lines .You sold me ...that exact same size allen wrench that's been sitting atop the press at work for the last 5 years is gonna go missing...and become a gurhkri.

[@mikedavidbeats2560]

Forge a parang! That will be an awesome knife and would sell for a good chunk of change.

[@redneckthreepercent]

That's a sick knife. I really like it. You should try different sizes

[@DaedalusProps]

I NEED THAT PIPE WRENCH DAGGER ON A SPIRITUAL LEVEL

[@NamBui-ot2ox]

Make more knives, guys, I would love to see you make that knife

[@henrydboys8867]

Dam that a nice one! came out really good the handle is freaking sweet....its crazy what you started with great video really enjoyed that one 👍👍

[@kess1954]

Very good job!! You are very talented!!

[@richardszirmai8103]

Awesome design nice job man !!

[@jeffsmith3581]

Kool Blade bet it would look awesome with a Japanese Hermon heat treatment, love your stuff.

[@thecaptainofrock]

Man I love that Allen knife!! Great job

[@thegit8698]

Very nice, have you thought about bluing or some sort of finish to the metal to give it some protection from rust? I liked what I could see of the colour on it when it came out of the oil

[@chrishouston3566]

This guy is awesome. If you give him a fork he'll give you a fucking samurai sword

[@FargoFX]

Love it. Nice work.

[@go_wend_gone]

Best design...thumbs up

[@maynard5955]

Nice knife turned out a lot longer than I thought it would

[@coffeeisgood6659]

. That is so dope! The handle reminds me of my bread knife, so it looks like a large sharp bread knife. Really great job! 🙌

[@TheMrWoodsman]

Lovely knife!

[@Revenant483]

Awesome blade man!!!! You are good!!!!

[@devynm5882]

You should try putting some scales on your next knife

[@perro_dinamita]

I love the dagger!! i want it!!!

[@vangallamore7145]

JAKE'S CUSTOM KNIVES: I'VE BEEN A HUGE FAN OF YOUR WORK FOR A LONG TIME AND I CAN APPRECIATE YOUR TALENT. I DO HAVE A REQUEST IS THERE ANY WAY YOU CAN MAKE A CSGO BUTTERFLY KNIFE OUT OF A COIL SPRING?

[@jaishreeram9833]

make more videos it's very helpful to others good luck

[@badhonebrahim7707]

man i love the handle more then the knife... so epic, makes me wanna touch it.

[@haryadigempilz5729]

Smooth beauty knife bro

[@sonyhk3824]

Awesome art.

[@leighchristopherson6598]

You can try to take the warp out, by reheating to tempering heat and using three rollers in a vise. Place the first two, one at either end of the inside curve of the warp, the third goes on the other side, at the high spot. You slowly, gently close the vise, until the blade is bent almost as far in the other direction. Loosen the vise, check to see where the blade has settled, repeat as necessary.

[@fritznonya459]

Very cool knife

[@andredias9424]

Lmag productions Ridículo estragar uma chave pra fazer uma faca"knife"

[@chirodiesel]

Bravo. That shit is beautiful start to finish.

[@GodzillaB210]

Absolutely beautiful knife! I could see myself using that in the kitchen. A little constructive criticism. When you straightened it, to me, you lost what it was. Personally i would have used straight end for the blade and the curved area as the grip and made a hunting knife. This knife just looks as if it was made from some generic hexagonal stock.

[@rastaman3040]

Very very nice!!!!!

[@VoidIndigo25]

Is possible make a knife of one sledgehammer ? Your jobs are awsome !

[@msblades5382]

Jake great build and nice job forging. I'm sure you know but you should try and leave as much meat on the blade prior to HT and on account of the reshaping of the steel you should normalize a couple times before HT as well. Question Does your forge get up to temp easily? Its hard to tell on account of the day light and the camera not able to see the correct colors. I am building a new forge at the moment and for the burner I'm building a ribbon burner. Its still forced air but the heat is extreamly even threw out the forge and has no problem reaching welding temps in no time. Not to mention the ability to run at a lower gas pressure saving fuel. Just wondering on a earilier video you mentioned selling the blades. Have you had any luck using KZbin to sell them rather than Esty. I ask because I don't have an Esty but also have a KZbin channel. Thanks for the content you are a talented maker.. Sincerely Martin M&S Blades

[@jonasbarry8979]

Product placement at 8:04ishlol?

[@albertlezcano]

Brother good knife, could you make one with a damping piece?

[@dabantofiq510]

Waw very very beautiful job god bless you

[@calemwalls5788]

Very beautiful blade. Is it hard to hang on to? It looks like if you were using it that it would slip out of your hand after a few goes.

[@cameronjones3873]

I notice you always have a warp. When you throw it in your oven or however you heat treat it take a piece of straight metal and a c clamp and clamp it to the blade so it stays straight.

[@EODReddFox]

Looks so cool man

[@sethjones5078]

For the scotch brite belt Is it fine or super fine thanks keep it up

[@linxiaoning]

By the way , after the forge and grind , before the quench , do you make the normalizing the knife?

[@jcnme]

Love your Channel Brother! Chopper Camp Knife , Out of a Leaf Spring Please !

[@alphablackbear1822]

You should make an oversized karambit from a old wrench

[@iceman213]

Really cool.... 🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼

[@douglasfathers4848]

Spectacular

[@miguegonzalez199]

Woooooooo amazing

[@jaxxonkoethler3001]

Your awesome jake!

[@mje3055]

Very nice

[@marvindawg9257]

Hey, you know what would be cool? A big screwdriver as a knife using the original handle. Or a mace or flail from a sledgehammer.

[@funnyfailstv447]

Yeah I agree

[@rollin18wheels]

Did you build your anvil?

[@atvar8]

Do you stick this in your kitchen oven to temper it, or do you have a separate oven specifically for doing so?

[@jaishreeram9833]

bro I have one question did you quenched this knife or not. I have to make this so I'm confused

[@monkeykong6230]

That thing would make a wicked carving/ butcher knife

[@mrpeu23]

Cara sou fã do seu trabalho

[@CashfromTrash555]

realy good job

[@olivi3339]

Looks like a Allen wrench for a truck rear differential...

[@markpickerell8851]

I like the Japanese style blades sweeping curve' it really looks like it can cut before you even try to...🔪🍉".

[@nguyenthien3038]

very cool...

[@mostafapedram3713]

Awesome

[@JarredRandom]

not to be rude but it just looks like a fancy butter knife. Cool nonetheless!

[@tristanbarnett6271]

Could you ever Forge a knife out of a railroad spike

[@richardvarden543]

tristan barnett yes but it has a low carbon which means that it would not hold a good edge even after heat treat

[@wolfberzerker9422]

Damn. Had my credit card out for this one but, sold. Was that S2 tool steel?

[@Watch_Dog-13]

You should spark test you metals....

[@bigrev1601]

That's a huge butter knife!

[@stephenmatthias3503]

Do the chains stop somebody, just walking off with your Anvil ?....... LOL 😁😎

[@russelltalker]

Stephen Matthias its to lessen the sound it makes

[@12FASTPRO]

BEL VIDEO E OTTIMO LAVORO. COMPLIMENTI DALL' ITALIA. 10++

[@josants.8797]

Eres un maquina!!

[@scrublordmcshitt2296]

Kinda looks like a small katana

[@ngohongtruong2071]

Rất tuyệt vời

[@MRCOLOURfilld]

[Insert Obligatory "what a waste of a perfectly good tool" comment here] Nice knife.

[@TheLangy19]

Wow noise

[@lelepflores]

Incrível

[@حمنديمندي]

عمال ممتاز

[@NaveedAhmad-sr3vj]

Bro what is this u dipped heatup knife again of ending the video

[@m.sidukkkkkkkk]

Naveed Ahmad heat treatment/oil quenching kehte hain, metal ko hard banane k liye. Metal ko red hot krne k baad kisi bhi oil me dip krte hain.

[@曾清照]

咋沒中文

[@karlgustav5490]

it's not "made from good steel" lol...before forging you should know exactly what steel you are forging.;

[@GM-pe1ws]

can i see your knives ? you look like someone who knows very much about it.