One of those mosins has a Finnish capture/army property mark. How crazy is that, made in America, used by the soviets, and then used by the Finns against the Soviets, only to end up back in the USA again
@thesalty1626 жыл бұрын
I have a Suomi marked American Mosin made at Westinghouse.
@DB-rw5vu6 жыл бұрын
That gun was likely sold directly to Finland
@DB-rw5vu6 жыл бұрын
"Stevens, under the ownership of New England Westinghouse, produced over 770,000 Mosin-Nagant rifles under contract with the Russian government between 1916-1917, of which 225,260 were delivered. The rest were sold to the U.S. government who supplied them to the American Expeditionary Forces, White Russian forces, Finland, and the Civilian Marksmanship Program." stevens wikipage excerpt
@LazyGrayF0x6 жыл бұрын
MrMoustaffa - exactly. Both mind blowing and ironic.
@enticingFicus5 жыл бұрын
The history and engineering alone make me a fan of weapon history... that and they are a lot of fun to shoot.
@Zyme868 жыл бұрын
Incomplete Suomi markings? So it was left unFinnished... Illseemyselfout
@grugg31086 жыл бұрын
No, you stay.
@thomastorodo99685 жыл бұрын
You can stay, I'll go out.
@dukecraig24025 жыл бұрын
Zyme86 Thank you Cleveland, I'll be here all week!!!
@FrankTheTank75755 жыл бұрын
Hiyo!
@JohnDoe-on6ru5 жыл бұрын
No hurry, stop Russian.
@geraldgriffin82207 жыл бұрын
I remember an odd story of a White Russian living in New York who bought a bunch of these and planned on holding them until a counter-revolution that never came. He was eventually persuaded to sell some of them as aid to the Soviets in WW2..
@rohampasha96677 жыл бұрын
Gerald Fallon-Griffin neat one
@mihanich5 жыл бұрын
@Stanley Jedrzejczyk those "Stalin hordes" (nice using of Nazi propaganda clichees BTW) fought for their country against a total genocide and replacement planned for them by the Germans. So have some respect.
@zwillia.s14325 жыл бұрын
@@mihanich they did the same to the Germans after the war although the Germans did the same to them
@moritamikamikara38795 жыл бұрын
@@mihanich I would only respect them if they were averse to doing that themselves.
@mihanich5 жыл бұрын
@@moritamikamikara3879 I don't really get your point
@bengttolkis86468 жыл бұрын
Here is a few of the reasons why so many Mosin-Nagant rifles ended up in Finland after the Russian revolution, during the Finnish Civil War. The Bolsheviks supplied Finnish Red Guards about 35,000 rifles delivered by rail from Petrograd (St. Petersburg) and almost 18,000 rifles shipped from Tallinn. The Germans on the other hand sold Finnish White Army at least 87,000 captured Russian Mosin-Nagant rifles. In addition to these large deliveries both sides also succeeded acquiring thousands of rifles from Russian garrisons located in Finland - the Reds from those Russian soldiers who supported them and the Whites by force, when they captured and disarmed Russian garrisons in their area. The grand majority of the rifles received by Finnish Red Guards and Finnish White Army were Mosin-Nagant infantry rifle m/1891. February of 1919 when Finnish Armed Forces made inventory, they had bit over 210,000 Mosin-Nagant rifles (all versions included).
@poppacross798 жыл бұрын
You mentioned the Westinghouse Air Braking system. It was in fact adopted for every railroad and all heavy trucks used since. It was revolutionary.
@squirrelonmapletree7 жыл бұрын
History alone makes these videos worth watching. Super interesting.
@samh10228 жыл бұрын
did the rifle know it was adopted?
@UnprofessionalProfessor5 жыл бұрын
Yes, but they made sure it knew that it was loved all the same.
@tobyjenny76225 жыл бұрын
What some stuped shit 😞😞😞😞😞😞😞😯😯😯😯😯
@UncleMerlin5 жыл бұрын
@@tobyjenny7622 can you take a joke?
@Phobos_Anomaly5 жыл бұрын
@@UncleMerlin Apparently not.
@ahandgrenade36403 жыл бұрын
@@tobyjenny7622 can't even spell stupid .
@mrtlsimon8 жыл бұрын
It is funny that companies were "too big to fail" in the 1917 too. I find the Mosin rifles to be very interesting because of the variety and back story. You do a great job of telling the story without getting bogged down in too many details. Good job, Ian.
@cbroz74923 жыл бұрын
A good book to read id "Foreign Miltary Rifle Contrats in America"...forget the author
@thekalamazookid4481 Жыл бұрын
It was more of a military strategic move than a too big to fail situation.
@mysss298 жыл бұрын
Darn it, Ian, now I want to know more about that Westinghouse air-brake system and its effects on the Imperial Russian railways....
@robsorgdrager84775 жыл бұрын
I got to fire a mosin recently. I only know it being polish mil surp and it fired it's native cartridge it was pushing 80+ years old. It had a composite stock put on and it sported a shorter barrel than the one in this video, it was gone through and refurbished. Still had the bayonet and everything. Had to be one of the nicest firing rifles I've used in a very long time. We basically removed a stump with it. The fire ball that licks out the barrel is insane and the concussion is awesome but it recoiled so smooth and soft.... beautiful rifle.
@meltedplasticarmyguy6 жыл бұрын
I had a Westinghouse for a number of years, but ended up selling it earlier this year. It was a beautiful rifle and fired great. I had a lot old and unique firearms that I regret giving up, it was either that or go hungry. I miss my armory.
@ChrisUrsiny7 жыл бұрын
a range buddy of mine picked one of these up at a pawn shop about 17 years ago it was mislabeled as he recalled as british 303 or something to that effect and purchased it at only 90 bucks since the pawn shop knew nothing about it, it actually was in very good shape bore wise, it passed the bullet test with flying colors when testing it with 147gr up to 203gr soft points and he shot it with some new production wolf 200gr match extra and it yielded 2-3 inch groups at 100 yards on a calm day, not too bad for a rifle thats a hundred years old.
@Dovah225 жыл бұрын
Chris Ursiny i got one thats marked Tula 1939 and it shoots great. I bought it for 215$ around 5-6 years ago from GM and its all mechanically sound, the rifling is in good shape and its my favorite for the range.
@chadnoland54382 жыл бұрын
Actually not a very good deal since you can get new unissued ones for about $125
@marcusborderlands6177 Жыл бұрын
@@chadnoland5438where lol
@Rickinsf4 жыл бұрын
US soldiers and sailors carried Mosins during the "Polar Bear" expedition to Archangel. Also, 20,000 captured Mosins were shipped to Ireland by Germany, but that mission failed and the ship carrying them was scuttled.
@WAQWBrentwood8 жыл бұрын
You can be sure.....The Westinghouse models only ran on AC current!
@yothu24315 жыл бұрын
now that is funny, well done mate..
@jamesadams53867 жыл бұрын
Several years back I pieced together a 1917 Remington from parts bought here and there. I got the barrel off EBAY and the rifling and crown looked almost unused. I think I got the receiver from Gunbroker, don't remember where I got the bolt. I put it all together and put it in a pretty nice wood sporter stock and mounted a RockSolid scope mount. I suppose it is the Remington barrel and a lot of luck but this thing shoots fantastic. I know that some will say I screwed up a collector/historical piece but I buy things to use and will throw them away if they function poorly. I will enjoy the challenge of making a rifle shoot accurately but if it is a lost cause, I will not sell it to someone else. It will either get trashed or given to someone that thinks he wants it. Anyway, my pieced together Remington is really great. So far I have only used surplus ammo but just bought 200 rounds of 180 grain Sellier & Bellot soft points and am looking forward to testing it with this modern ammo.
@ditto19585 жыл бұрын
Ernie Pyle did an excellent column in WWII about a small arms repair depot. When he visited one, they were doing M-1 Garands. In the morning, they took the rifles apart, scrubbed them in gasoline and separated all the parts into buckets. After lunch, they reassembled rifles from the parts.
@bobthompson43194 жыл бұрын
After I heard ian talk about how tooling was before CNC machines. By having a machine that does a single cut for each part of a rifle. So if it takes 50-60 cuts to make a bolt then it take 50-60 machines and trained workers to operate each machine. So theres a TON of machines and trained to make the weapons.
@rogainegaming69243 жыл бұрын
Yep. Thats why production numbers for guns used to be so low, and why you would hear stories of guns being adopted in the 19th and 20th centuries, but not actually being produced until a few years later once the tooling was up and produced.
@hamtareinenklaalnavas89368 жыл бұрын
Its not Soviet rifle,its Russian Empire weapons,nord folks in Russia love this gun for hunting ,shoot squirrel in eye.
@mikeblair25948 жыл бұрын
after october 1917 they're soviet rifles. and yes "shoot squirrel in eye".
@HobLobbington7 жыл бұрын
I've got a soviet one. My grandfathers neighbor trained dogs for the KGB or something like that, and when he saw it, he said that he once saw someone accurately shoot some sort of small game (I forget) at an extreme range with one.
@PostalPatriot5567 жыл бұрын
There would be no squirrel left.
@xmm-cf5eg7 жыл бұрын
I've seen rabbits separated at the spine, one half is the head, the other half the hind legs. Mosins are for Moose, not small game, haha!
@tacticalpacciani61476 жыл бұрын
@Richard Joyce pest control you idiot
@GamerNation12218 жыл бұрын
Does he live at RIA house? 😂
@mcchicken18496 жыл бұрын
Yes.
@Hiiiiii746 жыл бұрын
I would.
@mjarchambeau5 жыл бұрын
Safest place on earth.
@hectorcorona95364 жыл бұрын
Miss gun Jesus: please come back home... Gun Jesus: *I'm in it*
@ryanbrown1724 жыл бұрын
That’s actually his bedroom.
@deepbludreams8 жыл бұрын
Curious as how these compare to other nationalities of Mosins in terms of quality.
@deathpyre428 жыл бұрын
How do the American ones compare to the later Finnish ones?
@thegoldencaulk27428 жыл бұрын
Likely the quality was more consistent than Russian guns. The Finns had the best Mosins, of course. Really nice rifles.
@USSEnterpriseA17018 жыл бұрын
From what I have have seen and read, most of the early Mosins were quite good and not sloppily assembled. Really, the issue of manufacturing came from a need to crank out as many rifles as possible under wartime stresses. Another thing to consider is that Russian thinking can be a bit different at times. To them, good enough is good enough and it is a waste of time chasing perfection when it doesn't make it substantially better. Funny thing is though, there are stories of the US troops sent to Russia during their civil war having major problems with the rifles being unusable and discarding the US made bolt for a Russian made one. From what I understand, the oil used by the US was entirely unsuited to the harsh cold and froze up, while the Russian bolts were lubed with a better suited oil for the cold. As a side note, I always found it interesting how people seem to judge the Mosin based on the roughly built WWII rifles and also point out the design flaws compared to other WWII era rifles. The thing to remember about the basic Mosin action is that it pretty much did not get any major design upgrades from 1891 to the 1960's, when the Chinese finally quit making them. It is not a contemporary of most of the WWII era rifles, it is pretty much a first generation smallbore repeater. It's contemporaries are the GEW 88, the long Lee-Enfield, the Lebel and Berthier, the Krag-Jorgensen and probably a handful of others that I am forgetting. Only two of those other base designs were still considered frontline rifles by WWII, the Lee-Enfield and the (Danish and Norwegian) Krag, and they had been upgraded from the original design that they were based on (in the Lee's case, almost redesigned).
@HaqqAttak8 жыл бұрын
I have an M39 and the action is so sticky it really is a problem. Rounds get caught on the feed ramp too.
@chickenpotpie20088 жыл бұрын
HaqqAttak send it to me. I'll take it off your hands.
@HughesEnterprises8 жыл бұрын
My Finn capture 1897 Tula M91 has a Remington bolt.
@kickboxs776 жыл бұрын
Thanks for sharing that
@combain6 жыл бұрын
I'm from Tula. Hope your Mosin-Nagant works properly.
@shawngilliland2436 жыл бұрын
Many of the M-N's available here in the US have mixed parts, with mixed results - sometimes the rifle functions just as it should, and sometimes there are problems, for example, even getting a round to chamber.
@combain6 жыл бұрын
@@shawngilliland243 What could you expect from an old gun with rimmed ammo...
@brianeighties44816 жыл бұрын
combain I have a 1943 from Izhevsk that functions beautifully. It is loose and was put together fast because the Germans were close. They had to crank out rifles that would normally would never pass inspection. It’s not nearly as tight as my Chinese type 53, but it has way more character.
@whatever-pw3tj2 жыл бұрын
This channel has helped me through some rough days I love fire arms and find the way this is presented calming. Super chill super informative what's not to like.
@TreacherousFennec4 жыл бұрын
"It's hard to solve the problem if you don't acknowledge that there is a problem." Oh boy didn't that age well.
@jonathanjones36232 жыл бұрын
I concur what he told me about the Russian weapon inspectors just makes me cringe you literally the country is being invaded from the West people are dying properties being destroyed you know Russian families are being torn apart and the grain of the wood lol I I could definitely tell you there are some people that contributed to Stalin's rise to power and it was those guys
@kohinarec65805 жыл бұрын
I participated in a play set in the Finnish Civil War. We had real (deactivated) Mosins on stage. One of them was made by Remington in the USA in 1917. It became the play's heroine's rifle as it was easily distinguishable in the storage. It was also somewhat lighter than Russian ones (I swear, it was more delicate and better finished) so suited a female user with less physical strenght and smaller hands and had nice, fluid operation of the bolt.
@kenhelmers26037 жыл бұрын
Very interesting! Thanks for sharing this with us guys!
@hippymad18 жыл бұрын
Do you have a video on one of those French Mosin Nagants?
@ForgottenWeapons8 жыл бұрын
Not yet. It's hard to find them in their original configuration; most were refurbished by the Russians or Finns.
@hippymad18 жыл бұрын
Shame. Oh well, keep up the good work. Love your content.
@Khaenz6 жыл бұрын
A few of the French mosins from Chatellearault exist in Finland in original config and I could find one easily, although acquiring them for something like a review is probably extremely difficult as they're typically something you find in some old attic on a piece of land you own and stuff and as a result unregistered, I don't think most people even know they have them. Same applies to Arisakas used in the civil war and other similar weapons. Finland kinda has this thing where there's a ridiculous amount of unregistered weapons that people either didn't register, turn in or just forgot in some attic or cellar somewhere. I think same might apply to a lot of the ones leftover in Russia where they're just unregistered and in some old farmers shed and hasn't been touched in 80 years or so.
@nathan6555556 жыл бұрын
Vodkasekoitus indeed, same here in Belgium. I think it is the same in all of europe. There are a lot of very rare weapons but people can't register them so you can't make videos about them. Even when you have a gun license you can't register unregistered guns so it is hopeless.
@troystallard68952 ай бұрын
I have a Westinghouse Mosin I found cheap online, that the owner had picked up at a garage sale many years ago The steel is immaculate... if there's such a thing as a used rifle with 100% bluing, this gun is it. And it has no markings whatsoever, beyond the standard factory ones. But the American walnut stock was completely butchered: the comb had been shaved down, the hand guard was missing, and the stock had been crudely cut back to just a few inches in front of the trigger. Fate stepped in. A member of Gun and Game said he was replacing the original stock on his 91/30 with a synthetic Monte Carlo stock, and would send the original to anyone willing to pay the shipping. I didn't need one at the moment, but figured what the heck. Imagine my surprise when what showed up was a stock for an M1891, complete with hand piece and all the hardware. It looked like crap, because someone had applied a black finish without properly cleaning it first. It was crinkled like an old-fashioned typewriter finish, and actually sluffing off in places. But when I stripped the wood, it turned out to be the most gorgeous Arctic birch Finnish stock I've ever seen. A lovely set of clothes for the Westinghouse... One interesting feature is that the bolt isn't bright; some sort of treatment gave it a dark, shadowed look. It's the only Mosin I've ever seen that on.
@telepuzo8 жыл бұрын
Great video, Ian. One note - 3rd arsenal is Sestroryetsk or Sestroretsk. You have a typo there. It would be amazing to get a video about the history of 3-line rifles in Russia and dispute between Mosin and Nagant about patents, naming and etc.
@AaronAlso5 жыл бұрын
Mosin Nagant: because sometimes the enemy hides behind things.
@alexanderwoolverton28134 жыл бұрын
For when your neighbors house is getting robbed and the guy is hiding behind a fridge
@BobDuffy-kf2pf26 күн бұрын
Way back in 1977 I bought a Remington Moisin Nagant at a gun show. I now know it was assembled out of rejected parts! First off, it was never serialized and the words "Remington Armory" are stippled over. The bolt is blank too but the safety is cracked. The trigger guard tang screw hole is oversized without threads, and the otherwise nice stock has a knot at the wrist. It had no cleaning rod, upper handguard of screw in the barrel band. Oh, the stock has no nose cap and is smoothed over. Checking it out and dismantling it, I found the barrel had split at the chamber in proof testing, but the split is hidden by the stock. the receiver and barrel have the Russian eagle and the cryllic "N"' proof mark. the firing pin is unfinished and the sear was made into a hair trigger! If Ian wants to see it, he can stop by my home here in NH if and when he visits the Amoskeag Auction gallery in Manchester, NH. Well, I only paid $35 for it in the first place.
@Aleckael8 жыл бұрын
Jeez, the finish and markings on these rifles is outstanding.
@m44guy Жыл бұрын
Many years ago I purchased a Remington m91 at a gun show sa marked but it still wears its walnut stock with the flaming bomb and Russian eagle I also have a Remington 91/38 and Remington “Finncub” to go along with them I have a Westinghouse m91 that was heavily modified/ rebuilt by the Finns and is extremely accurate
@fritzschumacher60478 жыл бұрын
My first rifle was one of these- Remington. No top handguard. Cases would get stuck sometimes. Eventually ejector broke off.
@brillenfux46878 жыл бұрын
Man, I love story time with Ian. But is it just me or is the audio mixed really low? I always have to crank it up all the way.
@MrJento5 жыл бұрын
To add a small detail. J P Morgan was more than a purchasing agent. He actually held both the guns and Russian gold in “bond”. You see Russia had a long history buying arms in America. Smith and Wesson, Winchester and most famously Merwin and Hulbert. Occasionally, the Czar might “forget” to pay for a shipment of guns. So the makers who might have a large contract learned to ship in small batches. In stepped Morgan. Massively wealthy. Too rich to fail, he guaranteed production, delivery to an FOB point and most significantly paid the gun makers on that delivery. Usually to a Russian “bottom” (ship) in NY harbor. Then Russia would replenish the gold held in escrow by Morgan and the cycle would repeat.
@deceptivepanther8 жыл бұрын
I wonder; did manufacturers in the 19th century have instruments that could assess bullet velocity and effective range or did they take an educated guess?
@ForgottenWeapons8 жыл бұрын
Yes, they would measure bullet velocity.
@blastpressure7108 жыл бұрын
Forgotten Weapons how so?
@novaman35098 жыл бұрын
blastpressure710 I could imagine one way was to know the distance from the rifle too the target, and count how long it took for the bullet to get there. Of course, that wouldn't be the most accurate measurement, but it may have been all they had.
@deceptivepanther8 жыл бұрын
I suppose a stopwatch would work over a couple of hundred metres, and then maybe some math could be used to extrapolate a muzzle velocity.
@pinselimo8 жыл бұрын
Take a rotating rod with two round paper sheets on it in a measured distance. Since you know the distance between the sheets and the speed at which they're rotating, when you shoot through them, the angle at which the holes appear can be used to calculate the bullet velocity. Of course only as long, as the sheets wont rotate a full revolution until between the two passes of the bullet!
@jamesharrison23744 жыл бұрын
Neat video, had the pleasure of working for Frankonia Jagd in the Late 90’s and got to Handel a number of US made Nagant Rifles. My main area was selling military rifles, Black Powder arms, and working with competitive sport shooters.
@ivyssauro1238 жыл бұрын
Damn these are beautiful, and look more well done than all others i've seen before.
@danielbrockett95445 жыл бұрын
I came across a MINT Remington at a gun show a few years ago. The guy wanted $1,800.00 and I didn't buy it. I still wish I had bargained with the guy, how often do you come across such a unique piece of history? I would not have been able to shoot it though, too expensive and firing it would have decreased the value so it would have just been a collectible. So I passed.
@hansheden8 жыл бұрын
Nice history lesson. Keep 'em comin'.
@garywooten86125 жыл бұрын
I have one of the new england Westinghouse ones that was sporterized still shoots and works flawlessly
@TheMauser98a5 жыл бұрын
I picked up a sporterized Westinghous Mosin Nagant today for $250, very nice rifle.
@TheMauser98a5 жыл бұрын
I am glad to hear it shoots great
@garywooten86125 жыл бұрын
Yeah the trigger is a little heavy but once you get use to it it's a tack driver
@stalinbeballin97113 жыл бұрын
It'd be cool to find a Russian M1895 Winchester lever action, made in similar circumstances. Chambered in the same 7.62x54mmR, and modified with a bayonet lug, and with the capability to accept the Mosin's 5-round stripper clips. Last lever action to see a major war...
@bradenpetty3828 Жыл бұрын
Ian has a video on the russian 1895, since you like it so much.
@stalinbeballin9711 Жыл бұрын
@@bradenpetty3828 I've seen it now, just hadn't seen it then
@74nova36 Жыл бұрын
@@bradenpetty3828don’t be petty Braden
@bwhog3 жыл бұрын
Darn you for making me curious enough to locate my examples and take a fresh look at them! 😄 Unfortunately, neither of them is all matching. Like one of the earlier commenters, my NEW also bears a Finn stamp and sling swivels. My Remington does not bear Finn stamps but does bear Russian acceptance stamps. Both also bear import stamps, albeit from different eras. So both these went overseas and made their way back to the US after they were withdrawn from service. The life of an early 20th century battle rifle can be a fascinating journey through history! This story also demonstrates the hazards of getting involved in war production. If your customer suddenly ceases to exist, runs out of money, or the war suddenly ends and the contract gets canceled, well, SUCKS TO BE YOU! Thank heavens that the US govt decided that there was enough merit in making this purchase to save Remington from some difficult times. It's also really nice to see that Remington in such nice shape. Wouldn't be surprised if it simply sat in a crate for a few years untouched until after WWII and then sat in a safe for a few more decades, mostly untouched but well cared for.
@ScreamingSturmovik8 жыл бұрын
are the contract mosins (as im calling them) regarded as better quality rifles or is a mosin just a mosin unless it's Finnish?
@ForgottenWeapons8 жыл бұрын
They are all pretty much the same in terms of quality.
@pastorclay828 жыл бұрын
Forgotten Weapons how about in function? do any variations work smoother?
@Gungeek8 жыл бұрын
The Mosins where the bolt it fitted to the gun work just fine :) My Remington M91 cycles fine but the bolt is a force match by the Fins.
@Koumrian8 жыл бұрын
I think many of our prejudices about the fit and finish of mosins come from the fact that most mosins we have are wartime rifles. Pre war (WW2) rifles, particularly pre 1935 mosins were generally of good fit and finish and higher quality builds. Although they all performed the same in therms of reliability and function.
@frankdn1098 жыл бұрын
I had the chance to handle a Tula M91 dated 1915 and it was much better made than the Soviet stuff. I would own it today but the man wanted over $500.
@jamesslick47902 жыл бұрын
Westinghouse Air Brake Company's "sister" division "Union Switch & Signal Company" also made over 50,000 "1911s" for the US during World War Two at its main Swissvale, Pennsylvania plant.
@nobletaco4 жыл бұрын
Fun fact, it cost about $22.50 to produce those rifles in 1917 is is equal to about $425 in today’s money
@chasevogt20908 жыл бұрын
this goes on your greatest hits album
@vice69967 жыл бұрын
Good lord, the logistics of these American mosin deals was convoluted. What a nightmare. But I would love to have one if it was affordable. Fantastically informative Ian. Thanks.
@mattm.35624 жыл бұрын
My 91/30 has a Remington marked firing pin so that’s pretty cool!
@00_rei903 жыл бұрын
As for why the russian needs that many rifle, a simple "rule of thumb" of sorts is that for every soldier, you need 2.5 rifle; one on his person, one on the armory and one half as spare parts
@alexmelia88734 жыл бұрын
@16:50 they sent a lot to state governments for backup rifles for national guards. Florida had several crates sent to the basement of its original capital building that were rediscovered in 2009. One of the is on display upstairs, beautiful Remington model that has been asleep for over 100 years. I asked where the rest went and actually went behind the scenes with the curator of the museum trying to dog up records but nothing came up
@mikhielthorsson60336 жыл бұрын
My Mosin has a Remington stamp on the receiver and also has the Imperial Russian stamp on the barrel and reciever. Unfortunately before it came into my family, someone had tried to sporterize the stock. The comb was raised, and added a rifle pistol grip.
@VC-Toronto8 жыл бұрын
Wonder what the "unit cost" was back in the day on a large order such as this, adjusted for inflation into today's dollar.
@vaclavholek44973 жыл бұрын
"War Is A Racket" - Maj. Gen. Smedley Butler
@JJW39 ай бұрын
One of my Finn M39 rifles has a Westinghouse bolt group, while the receiver is a Sestroryetsk.
@Kaos_Nitsua7 жыл бұрын
I use to have one of these, it was kind of in rough shape, who ever had it before I found it, cut all of the wood off of the barrel and bent the hell out of the front sight it was also covered in rust, my dad and I spent a few years trying to get some parts to fix it up, but we ran out of money one day and had to sell it for food.
@pbr-streetgang4 жыл бұрын
Thanks for the vid sir. Very educational.
@rapiddave92688 жыл бұрын
Make Nagants Great Again
@davidwoodward70207 жыл бұрын
enfields are the best so you cant!!
@jake-zi4px7 жыл бұрын
ahh tenpenny, the memories
@realmenshoot30857 жыл бұрын
Officer Tenpenny What do you mean again?
@theorganizer12735 жыл бұрын
#MEGA #MakeEnfieldsGreatAgain
@GWinvader1013 жыл бұрын
I have a 1942 Tula 91/30, just got a deer the other day with it. Took it clean off it’s feet!! The power transfer of the 7.62x54 is immense!! Also it is the most accurate gun I have ever fired.
@mybluebelly8 жыл бұрын
Your videos are so long i have to speed them up, lol. Still very interesting stories you have. Have any videos about really old weapons?
@BlueskKulls8 жыл бұрын
mybluebelly he has a lot of videos about black powder rifles and pistols/Revolvers but you will have to scroll down a bit in his videos, about last year I think. Also there will be some playlists. Just look at his channel
@mybluebelly8 жыл бұрын
Thanks!
@enriquegarciahernandez Жыл бұрын
Some of the American mosin nagant crossed the southern border of the United States and ended up in the hands of soldiers from the many factions of the Mexican revolution. You can find pictures on google of soldiers armed with mosin nagants. I have one of those Remington Mosin Nagant used in the Mexican Revolution. greetings from Mexico.
@shaunw9092 Жыл бұрын
Yeah "Mexicanskis"! Most of them that were left were sent to Spain to arm International Brigades during the Civil War there.
@carcrazyification7 жыл бұрын
Fantastic video with a lot of information I never knew before, but it's funny that he said "Break", "Wear Out", and "Mosin Nagant in the same sentence.
@MrRoboto13377 жыл бұрын
Note, he did indicate that it takes an artillery shell to do...
@1961nuffield4 жыл бұрын
The rifles sold via the English broker were known as English contract guns and have the circular stamp on the stock. I have a Westinghouse English contract rifle.
@jimmywoodward38574 жыл бұрын
I have a Mosin Ganant 1952 / love it they are very accurate
@Oneofthetwelve3 жыл бұрын
Great video. Thank you. Sir, the comment regarding chambering to 30.06 sponsors this request: would you review the FN Mauser chambered in that calibre. Thank you.
@diffsnicker65703 жыл бұрын
I used to have one of those from Colombia... best 250$ I ever spent and that was only 2 years ago...
@maxkennedy80753 жыл бұрын
This is a 4 year old video but I saw the title and couldn’t help myself Y’allsin-Nagant
@sentinelictorjanijf38047 жыл бұрын
Now we need a greek M1 garand
@flintlocke79546 жыл бұрын
Love your videos and detail. You should rename this one "Eary Corporate Welfare"🤣
@Frostwolf2237 жыл бұрын
I love my own Mosin, so seeing these is pretty cool to me.
@spazzmaticus15428 жыл бұрын
That wood is sexy. I wish my mosin had that kind of wood.
@mrdiplomat90185 жыл бұрын
Walnut, perhaps ⁉️
@ccuc228 жыл бұрын
The stocks of these American Mosin Nagants are interchangable I assume. I tried swapping stocks on Russian Mosins and they could not be done. There were all kinds of metal shims under the barrels, and it seems each rifle had stocks hand fitted on.
@rustyb.13016 жыл бұрын
Mosin numbers are kind of mind blowing.
@Dixielinemuzik8 жыл бұрын
No! Don't remind me of these! I turned down a Remington made excellent condition mosin last year, I don't know why I said no.. these things keep me up at night, lol.
@teutonic_crusader11754 жыл бұрын
Fun fact: Russia even bought guns from the japanese, mere 11 years after the Russo-Japanese war. Thats why the Russians on the eastern front were sometimes equipped with arisaka type 30. I know this because my grandfather (Im a german)was issued an arisaka type 30 that was captured in WW1, when he entered the Volksturm in 1945. He was given no ammunition though.
@austinm.98324 жыл бұрын
That's why the Russians had plenty of 6.5mm arisaka lying around, it was also used by the Federov rifle.
@foxy126pl64 жыл бұрын
Did he survive the war?
@teutonic_crusader11754 жыл бұрын
@@foxy126pl6 Oh yes, the town he was in was so insignificant that no american bothered to capture it, after the war was over he simply took his rifle and went home, he sold it later to a gunshop in the 70s.
@foxy126pl64 жыл бұрын
@@teutonic_crusader1175 cool
@kevinoliver308326 күн бұрын
The British also used Arisakas as training rifles. Once that enough SMLE and P-14 rifles, they gave the Arisakas (and presumably ammunition) to Russia. You find a Type 30 and 38 rifles with Japanese, British, Imperial Russian and Finnish markings.
@cooliobob12746 жыл бұрын
Nah, I've inherited one of those Bannerman conversions from my gandfather and there're anything but iffy. I've reloaded a bit and put quite a few pretty hot loads through it. The only problem I have is a crack in the old stock is starting to emerge from the pin in the side back to the trigger guard. If it wasn't for that crack, I'd go out and shoot it when I'm done here.
@arthurneddysmith7 жыл бұрын
8:29 1.5m + 1.8m = 3.3m, not 3.2m. Perhaps the numbers weren't as rounded as 1.5m and 1.8m though? Perhaps they were 1.45m and 1.75m?
@andymanusafa2 жыл бұрын
I recently acquired a 1917 Remington in original configuration. All matching except the bolt. This gun has no SA Finnish markings and no US marks of any kind. It also has Tula hammers and Ishevsk Bow and arrows on several original serialed parts.
@mistergrendel325 жыл бұрын
Great video as always Ian! However, they are always of auctions past. How do we see firearms for upcoming auctions? 🤓
@radiantjet4188 жыл бұрын
The guns look brand new! We're they ever used? They just look so clean!! Never seen a Mosin look so clean!
@TallifTallonbrook8 жыл бұрын
We still use the Westinghouse train brakes today BTW. Not the main valve in the locomotive but the brake controller on the individual cars.
@thebritishww2man8 жыл бұрын
Great video! Fascinating how many were made in the US .
@spef73968 жыл бұрын
really good video, keep it up, love your channel
@bikkiikun11 ай бұрын
Last I remember, the Russian stride is called "shag", ca. 71cm. And the Archin (also ca. 71cm and some change) is an arm-length.
@deathguppie7 жыл бұрын
question: Having read everything I could about operation archangel (Archangelsk). I couldn't help but notice the complaints of american soldiers, specifically in western Russia, about the accuracy of the Mosin Nagant rifles they were given. There is one account of soldiers saying that they tried to adjust the sights but couldn't get them anywhere near the accuracy of their previous springfield rifles. Having heard good things about Mosin Nagant rifles it made me wonder if there was a problem with the American version, or perhaps some other problem. Note: you mentioned Archangel in the context of eastern Russia. In fact there were two separate operations. The American occupation of Vladivostok and the attempt from that side to control the railway all the way to Nizhny Novgorod, and the occupation of Archangielsk in western Russia as a base for supply to the white army. (the latter being an amazing story of bravery as American soldiers fearing what would happen to the townspeople when they left them to the reds fought literally to the last man to defend them.)
@Gungeek7 жыл бұрын
Maybe it was the ammo they had and did they shoot the rifles with the bayonet on?
@MrRoboto13377 жыл бұрын
That's a good question. MN was designed to be shot with bayonet fixed, and it screwed with the sights when you didn't have it on the gun, at least in the non-altered later patterns made during soviet days. Sniper variants of the '91 exist, so we know the gun can do accurate fire.
@rogainegaming69243 жыл бұрын
I would also attribute it to the fact that they had to use arshins instead of yards in the sights. I wouldn't say it was a major factor, but even today people have issues in the US with metric sights on rifles.
@guelahpapyrus13854 жыл бұрын
Mine’s a Westinghouse. No SA marks. Maybe a Bannerman rifle. Thanks for the info!
@gonzisonsbc8 жыл бұрын
Great video.
@ericsundell99786 жыл бұрын
Interesting, did not know there were "US Mosins". Another great video as always Ian! Very interesting!
@rmichaelzachary85743 жыл бұрын
You failed to mention that the Mosin was a US issued service rifle and issued to the USMC Expeditionary Force occupying Arkhangelsk during the Russian Civil War. I believe they are referred to as US Rifle Model 1918. US manufactured rifles were issued to these troops. These rifles were surplused after the war along with ammo through the DCM. The Russian issues with Mosin production were not as severe as the American issues in supplying troops with 1903 Springfields.
@diffsnicker46643 жыл бұрын
I thought the designation was .3 inch Russian rifle
@rmichaelzachary85743 жыл бұрын
@@diffsnicker4664 Tryokh lineinaya vintovka was a Russian designation, referring to Russian Imperial standards of measurement. The USMC Expeditionary CORPs occupying Arkhangelsk had Mosins issued as US Rifle M1918.
@lelanddement40673 ай бұрын
I had a customer come into my shop back in 2004. With a Remington marked 1917. He wanted to put a scope on it. I refused, telling him to keep it like it is. That it would be worth a lot more in the future. I hope he did. Also I remember back in 1990. You could go to a Rose's store and but a Mosin for $99 dollars. And they would bring several out to choose from. Most had the octagonal receiver. Tell you the truth. The Mosin is one of my favorite rifles.
@deepscuba73848 жыл бұрын
Ian, If you are interested, I think I have found a quality scope mount for the SMG FG42 that is commercially available and requires NO modification of the dovetail OR removal of the flip-up rear sight. It is also VERY reasonably priced. Let me know if you're interested by responding to this post.
@ForgottenWeapons8 жыл бұрын
Sure - what is it?
@deepscuba73848 жыл бұрын
Company name is: "Lion Gears." Website is: liongears.com. Part is BM1318EX. They make a left & right hand variation. As long as the thumb screws end up on the right side of the receiver, and the handle is directly over the receiver it seems to work okay. I haven't shot it yet, but it looks promising.
@vati66r668 жыл бұрын
Hi Ian. Did you notice what the estimated price range was for the lot before the lot was pulled?
@deepbludreams8 жыл бұрын
They made millions of these, i have a feeling this would be maybe an 1,100 dollar lot at best for the pair.....these where never particularly rare in the US, they do pop up from time to time.
@matthewcarlson94436 жыл бұрын
I have a Westinghouse. Now, I didn't it as a fully built rifle. I got it as a barrel, receiver, trigger and the bolt. Also it didn't have any front or rear sights, and it was in a pretty short barrel. Despite the fact that it is a very old mosin nagant, the barrel looks like it has never had a round put down the barrel. I'm making it a light precision rifle with an archangel stock.
@senatorarmstrong93583 жыл бұрын
I bought a tula mosin-nagant best purchase I have made I love the rifle
@stevenh.3904 жыл бұрын
A local shop got 1 remington 1917 mosin in a week aho-- I didn't know much about it, just knew it was American Mosin. It was missing front barrel band and a wooden top barrel hood-- reason why I didn't pursue purchasing, how hard is it to find replacements? Shop still has it. I would like it for the history- it be an interesting conversation piece.
@diffsnicker65703 жыл бұрын
Getting an 1891 mosin wood piece.. not impossible... if u want a Remington wood piece tho.. good luck with that
@ChrisUrsiny4 жыл бұрын
i think it would be an awesome idea if someone or a group of people found the original tooling and equipment and decided to produce a new american mosin-nagant rifle today, sell it for about 500-800 bucks, this would be a awesome idea since most of the current stock mosins currrenty in the us market place are quite worn and used, gone are the days when you could acquire a excellent condition (1945-1948 mosin) for 89 bucks.
@baneofbanes4 жыл бұрын
I can't think of a single person willing to pay anywhere close to that for a Nagant that isn't extremely collectible.
@frankmueller27816 жыл бұрын
Beautiful, beautiful, guns! I really like the darker stocks. (Walnut?)
@alexanderwoolverton28134 жыл бұрын
I love that you can tell it's American by just looking at it. The wood is almost identical to a typical garand.
@williamstackler67218 жыл бұрын
I was at a tiny private museum in Florida where they let us handle pretty much every relatively well known historical military guns from WWI through Vietnam. The firearms were all in perfect condition, well oiled and still functional. There was a rack of similar bolt action single round capacity rifles, from France, England, US, and others. Any ideas on what they are called? they were fascinating and were in perfect condition.
@raymondgatley8793 Жыл бұрын
The carbine version with the chrome bore I like the best
@cavedave19228 жыл бұрын
There is a Remington Mosin in a pawnshop that is heavily Sporterised that is marked 1918.(I think) They had it marked 303 British. It has a non matching 7.62 x 54R bolts in it . I've read some were converted to 30.06 but I couldn't put a round in the chamber. The price is cheap but I think I'll pass!