Forte's Clutch Fork and Pivot Ball Adjustment

[@BarchettaValveAmp]

I had that problem, did what Mike said and the fork setup is correct now. I recommend the adjustable pivot ball.

[@martinzeosex]

From where so i can buy it

[@19jody72]

Do you happen to know how far the pivot ball was from the pressure plate? I'm at 7/8 to the back of the head.. and having clutch disengage problems

[@fortesparts]

I have different length pivot balls and adjustable.

[@19jody72]

@@fortesparts I adjusted mine..so far seems to be working. Thanks for the video

[@fortesparts]

@@martinzeosex Call me to order the pivot ball. 508 875 0016

[@MatthewDoughten]

Hey Mike, excellent video! Learned a lot. I just crawled out from under my NV4500 that I recently swapped it. Was having engagement issues and it took me a while to consider the pivot ball placement. Wish I would have seen this first. Luckily since it's a GM unit I can reach in through the fork window to adjust.

[@Guest-at-the-Asylum]

Thanks Mike, I highly recommend Fortes Parts Connection.

[@coreygutowsky1307]

Hi Mike, I have a F5 cobra 351w. My clutch pedal is hard, I've replaced my through out bearing twice. Buy watching your video I guess my pivet ball is too short. How or what do I measure so I get t right pivet ball. Thanks, really good video by the way.

[@BBAILEY466]

Very good video, I learned a good deal. My problem is, I can not find the part that is supposed to be the engine side Z bar mount for my 64 Ford Galaxie with 385 series 460 and Top Loader trans. I bought Buds Classic Cars Z Bar kit, but it doesn't have the correct engine side mount. Thanks in advance for any suggestions.

[@charlieromeo5340]

Can you replace the fork and pivot ball without removing transmission?

[@ericfitzpatrick5319]

I have an issue that's weird. When my engine is off, I can shift into any gear easily, but once it's running, I not only cannot get into any gear, but I don't even hear any grinding noise or anything, can you help with some input, thank you?

[@fxdexter810]

Disengagement issue. Throw out bearing is not reaching the forks of the clutch same issue I have…

[@elijahgill5949]

Can it be that my clutch can’t come back enough because my pivot ball is too long causing a grinding sound when releasing the clutch

[@GreenToFeelBlue]

So I'm having an issue getting my pivot stud out. I've tried a long wench and it's just too tight. So I bought a deep well socket and it isn't deep enough. What do I use?

[@moisesmendez2226]

I'm looking for a 2003 huyndai accent pivot ball an can't find one please help

[@19jody72]

You still around....

[@fortesparts]

Hi Jody Yes I'm still around. Call me with any questions or to order parts. 508 875 0016 Mike Forte Btw, I just entered my 40th year of business.

[@jocolbysimon7112]

Zoom please