FOXBODY RITE OF PASSAGE / THE DREADED HEATER - EVAPORATOR CORE INSTALL

If you own a foxbody long enough.. You are going to have to deal with this! Heater core and evaporator install........
LINK TO SHIRTS teespring.com/stores/brew2l
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
Send mail to: P.O. BOX 900 Ashford, AL 36312
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

[@aaadamt964]

I did my first one in the 90's. Before the internet and i was too poor to buy a chiltons, haynes manual, etc. all i had was 30 beers and some determination. What a great time!

[@ClockFixer]

Ford engineers should have their Heads put on Sticks for designing this.........

[@24theMoney]

Ford Engineers were not practicing the Toyota Way in 1979.

[@hhaag2826]

I did my heater core in about 7 hours... $30 for the heater core. A shop was gonna charge me $800 to do it, so I did it myself.

[@yellowfoxbodyguy]

I have done mine twice in 26 years. 3 hours is what it took me last year! The 86 and earlier are easier than the 87 and up. 4 eye for the win! :)

[@BREW2LFOXBODY]

I need a 4 eye now for sure 👀👌

[@bcmfarmsllc8103]

I love doing Ford heater cores and evaporators! I’ve mastered them!

[@BREW2LFOXBODY]

I’m calling you next time... 😂

[@TrojanHorse1959]

Great video and heater evaporator core removal advice BREW2L, thanks!

[@tomkjr1]

Your buddy's Cobra is awesome...love to hear it run!

[@machetekid07]

I know I say this a lot but dude, I love you. Other than LMR, your videos have helped me so much with working on my mustang

[@briandubbeld5665]

Andrew saved the day AWSOME 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@florimshala1]

Great video and loving that steering wheel

[@Nike2141]

Clean Fox! I remember doing this on my car before the KZbins. It was definitely a learning experience.

[@RPJs-Cuisine]

Video was good enough for me bro! I love how u snuck in the B-Cam Roll 4 Da Haters! Lol! Man, that car has come so far along. I remember watching the videos before u did the 1st thing to it! Ugggh, I gotta get some funds together and start getting on my LX Hatch, it’s driving me crazy

[@TRAE_RC]

I had extra screws leftover when I did mine🤔.

[@BREW2LFOXBODY]

I might have had a couple 😂😂

[@stephenparker8460]

Weight reduction!!

[@dntlss]

Man you did a great job cutting the evap cover off, most people just butcher it,Ive done a few with a little cutoff wheel, that works great too. On the Ford shop manual there is a really good write up on how to do this job,they show you how to drill a couple of little holes before cutting the flap then using threaded speaker metal tabs to hold it together while it gets rtv or whatever one chooses to seal it with,i believe they recommend Butyl but Permatex black is killer stuff (so is the gray),i really like it. I highly recommend to people if they are going to keep the car buying a shop manual on Ebay, the one made by Ford, not Chiltons or anything like that, Ford shop manuals are pure gold.

[@FoxcastMedia]

Killed it bro, that’s a hell of a job either way!

[@stanleykee]

very informative video....I have not had heat in my 88GT since 2003...... don't drive it much in the winter...

[@allenlane5018]

I have not had heat in my 87Gt sense 2007 I really need to fix it.

[@aaadamt964]

Did you fix it yet?

[@ryanpatrick3347]

Good video and how to. Keep um coming

[@floppyseizure8615]

Great entertaining and informative video good sir!

[@BREW2LFOXBODY]

🙏

[@jaysonescoe5799]

Brew. I honestly prefer the cell phone footage. Go pro makes it look wider!! Or least on my end it does!! But I’ll watch either way of course....

[@BREW2LFOXBODY]

Thanks brother

[@appalachianfoxbodysaaronau3257]

Outstanding!

[@BREW2LFOXBODY]

Glad it’s over.. 😂

[@GearHead704]

I love your interior, been thinking of dieing mine. Great job on this as always. Paid for mine to be changed back in 2012, but I think they messed up because I've started smelling some coolant in the core and losing fluid slowly. May be on my to do list. See you on the 4th!

[@BREW2LFOXBODY]

Honestly I’m so tired of the black interior... I’m thinking of going porno red at some point 👌🔥🔥 I can’t say I blame you on paying someone.. lol it’s not the easiest thing.. see you soon 💪

[@floppyseizure8615]

@@BREW2LFOXBODY I've never heard it described as "porno red" but that is shockingly accurate.

[@chidrole]

Great vid! 👍🇨🇦

[@mitchescobar1060]

Tht white coupe 🔥🔥

[@irshred]

Awesome content. One question though. Why do have to cut havc box to get out evaporator?

[@braddokken9191]

What a job. Did you use a flow restrictor on the heater hose? Also did you swap to r134a refrigerant? I have both those items on my to-do list for this project. Thanks for the videos!

[@BREW2LFOXBODY]

Yes I have a flow restrictor, but haven’t hooked the hoses up yet. I’m using R134a with the retro fit adapters.

[@bohttrahlawson8858]

Won't lie the cell phone video is pretty clear and vivid

[@sammymendezjr1864]

I think your daughter has found her high school car . 😎keep up the great content .

[@BREW2LFOXBODY]

Lol looks like it.

[@jpp9846]

Good Work. Not looking forward to doing mine this winter!

[@BREW2LFOXBODY]

As long as you take your time... not too bad honestly

[@jpp9846]

@@BREW2LFOXBODY 👍

[@bobkeller8383]

I watched this to see how you take the dash out. The reason is so I can paint my dash. I want to change my interior from grey to black. That looks like a pain. So my question is have you changed the interior color before and have you painted a dash in place rather than removing? Any tips tricks or even a video of such a project would be appreciated. Thank you

[@gkrieger6824]

Another great video...but holy low volts and oil pressure!!

[@BREW2LFOXBODY]

The low voltage is what it is at idle, but the low oil pressure is the sending unit going bad.

[@jeffreynowotarski8775]

Good video. What cordless tool are you using, please? Thanks...

[@TheLastSoviet22]

done a few of these jobs. Sucked :(

[@CombsTowerProductions]

Really excited to see some videos from the upcoming ford takeover

[@richardbostick8675]

Where did you get the cup holder in the center console

[@Mww393]

Just did this on my 93 lx. Not sure what cell phone you have but I actually think it looks better than the gopro. You still going to the ford takeover may 4th?

[@BREW2LFOXBODY]

iPhone X / yes sir we plan on being there💯😎

[@Mww393]

Sent you a pm threw instagram

[@cwhall5430]

Bout to get me another head unit and thought of you. How has that one worked out for you?

[@BREW2LFOXBODY]

Great so far👌

[@UFOGHOSTHUNTER]

I did mine recently and now there's a squeak inside the dash that bothers me when the radio isn't on and when I drive down a bumpy road. I tried finding it but i just left it alone for now.

[@andycarranza4125]

Where is the heater control valve located on the fox? I replaced the heater core and everything worked fine. Then one day the I put the heater on and the switch was hard to turn and broke. I put a knew switch and no heat. Must be the heater valve

[@c431inf]

God speed

[@appalachianfoxbodysaaronau3257]

That piece on the steering wheel I sent you worked out I see.

[@BREW2LFOXBODY]

You know what....I actually forgot to replace it. 👀🤔 that’ll be my next quick fix.

[@LivNLo94]

I Love Foxbody's. I Also Hate Foxbody's.

[@wesboyd7416]

After helping my brother in law with his I’m gunna roll the dice and hope mine holds a charge when I get the ac kit from lmr

[@rodcognito002]

My 86 is stock and heater is HOT. Every one I tell seems shocked.

[@andyduncan770]

great videos .where did you get that steering wheel or did you mod that.

[@BREW2LFOXBODY]

Thanks, picked it up from LMR

[@joshlara8237]

I cut my open n never sealed it back just left that part i cut off open

[@djtw1st3d]

Are the seats original, or from a newer model?

[@hyperbull9659]

i dont believe it was stated in the video but when would you have to replace a heater core? Does it deal with overheating? i have a 91 gt and have been having overheating problems so ive been trying to determine what it might be from ur videos.

[@markmarkwell4151]

When it starts leaking on your passenger side floorboard. You will know because your windows will fog up inside. But if your ac evaporator core goes out first do both at the same time

[@joshua_irving93]

🤘

[@acmekanik9135]

Somehow I didnt remember the vacuum line that penetrates the evap line gasket when I tore everything apart 5 years ago....lol. I followed the line from the vac plug for the switch inside where it has a little plastic bushing glued on it which is the part that goes into the gasket for the firewall. It doesnt want to fit all the way flush thru the gasket in the engine bay side and I cant remember if it did or not. Now at least I know where everything goes again so its just a matter of replacing/repairing dried out brittle lines and making it all work again. Words of advice: Dont dick around and start putting your car back together 5 years after you tore it apart. Unless you make detailed drawings of how everything went together or took gobs of detailed pics, its a motherfucker figuring it all back out again 5 years later. Maybe if I wasnt 51 and more like 21 or 31 my memory would be better and I wouldnt be having this issue. : P

[@mikej5131]

Dang it man thats a lot of work for some a/c somebody spoiled. Lol jk great vid

[@BREW2LFOXBODY]

I’m old and fat.. I gotta have that a/c 😂😂

[@staceysims7270]

👍🏽

[@ClockFixer]

Driving my 87 GT Convert down to you so you can Do mine ! =-}

[@doctorhonda111]

The worst job is the brake booster BY FAR

[@sSkillaz336]

Yelawolf song in the beginning???

[@raheem8858]

Is your interior stock black or you painted it that color?

[@BREW2LFOXBODY]

Stock black

[@raheem8858]

@@BREW2LFOXBODY Thanks. Keep those videos coming. They inspire me with my 88LX and 93GT.

[@howardwatts4238]

ok why did you not out in a new blower motor

[@BREW2LFOXBODY]

?

[@feellnfroggy]

Just a thought, if you are going to bleep out swear words in the video, then filter the intro songs too. J/S

[@bryanrobinson7969]

I’m sorry am the only person who saw the corn under passenger seat 1min in

[@silverbullet1162]

Or drop it in lol, don't break it

[@2ndsspz]

that is not a fun job, probably the single most difficult thing to replace on a fox