The DREADED FoxBody HEATER CORE and EVAPORATOR Install

The DREADED FoxBody HEATER CORE and EVAPORATOR Install
Ki'm's 82 GT is back on the channel this time getting a new old stock heater core and evaporator for his FoxBody
You can show your support for the channel by purchasing an item below.
GearHead704 Shirt Link:
www.foxresto.com/product-p/88...
GearHead704 Sticker Link: alteredfox.com/products/gearh...
Fox Mustang Restoration: www.foxresto.com
Use Promo Code: gearhead704 for 10% off most items!
Dash Removal playlist: • FoxBody Mustang Dash R...
Kim's 82 GT review: • Original Owner Picks *...
Let's connect:
My Instagram / gearhead704
My FaceBook / gearhead704
My TikTok gearhead_704
For business inquiries only contact [e-mail]
#foxbody #gearhead704 #heatercore #evaporator
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Additionally, any information provided in this video is not professional advice and should be acted on at the user’s own risk.

[@fotiii1]

Listening to Matt explain the process was like deja vu for me, nice cold air is a must her in the south, great job guys👊🦊

[@GearHead704]

He told me you did yours not to long ago. That's really cool Frank! I bet it was deja vu, LOL

[@BuiltVSBought]

We all hate doing these heater cores but the info in this video is top notch

[@GearHead704]

Thanks Kenneth Sean

[@JM-tj2kl]

Enough can't be said for Matt. That guy gives a lot of his time and knowledge to the mustang community.

[@GearHead704]

Well said, I agree 100% 👊

[@rpliegos]

Love that 82 GT, it is a really great car, very well kept!

[@GearHead704]

Couldn't agree more! Love the 82's now. What a change from how I used to feel LOL

[@kimadkins5655]

Thanks Matt @Foxrestro for the great help. Best mechanic in the state! Hands down! Cool video Matt@ gearhead704 !

[@GearHead704]

That was a fun day Kim! I enjoyed getting to film so much of your car.

[@kimadkins5655]

@@GearHead704 I'll be back down to the shop soon man !

[@johnvaluk1401]

Yep. Just did this on my 87 GT. Needed heater core. So replaced both while heater box was out. Also changed out the rest of the AC components under the hood. About two day job taking my time and referring to your videos. Thx !

[@GearHead704]

That's awesome John! I know it feels great to have that completed, and doing the A/C parts at the same time makes a lot of sense.

[@oldfoxer1648]

Thanks Matt GearHead704 for this great video. I love how Matt from foxresto.com explains these how to videos. Very thorough. Impressive with Kim being the original owner of this original 4 eye fox.

[@GearHead704]

My pleasure. That's one of the main things we try to do on the channel. Share some good info.

[@edwardautrey3671]

Matt made that look easy !

[@GearHead704]

LOL, yeah he usually does and I"m like trying to keep up hah hah

[@mji387]

That's one project I need to do on my car. Great video Matt... it sure will make it easier for me now.

[@GearHead704]

I'm sure you've got it no problem, but if it does provide any help that's great.

[@BoomerangStang]

Mine looked like chocolate milk inside lol. I'll share some pics when I get into my rebuild videos. Matt at foxresto is such a _foxlopedia_ ! I wish I could just download his brain into mine lol. *Keep Rockin'!*

[@GearHead704]

Would love to see those at some point, hah yeah you and me both. He has so much knowledge.

[@bendirusso3149]

Great video! Entertaining and educational. Thanks guys.

[@GearHead704]

Thanks, I always try to incorporate both if I can.

[@cashfiander2552]

Good info Matt, I am sure once I get fully involved in fixing all the little fun problems on my vert (AC doesn't work, will need to convert to 134A) I will come back to this video.

[@GearHead704]

Cool, we are going to cover an R134a conversion at some point.

[@79beans347]

That was some good info as usual, keep it coming every Sunday and Wednesday to keep your 2+year streak of not missing putting up new content going and that is a feat within itself that not many you tubers can say or boast about so I'll give you props on that because it takes serious dedication for that. I ordered my pushrods today and once they get here I can finish my motor and get it dropped in and I can't wait, I had to measure them with a pushrod checker to get the correct length on them being the engine is heavily modified and stock would no longer work but I found a good deal on a new hardened set that normally cost more than 100 bucks for 40 bucks so it was my lucky day 😁

[@GearHead704]

That is a good deal! I don't know if I keep the streak alive forever, but for now I'm still enjoying it as my hobby. One step closer for your build man 👊

[@79beans347]

@@GearHead704 yeah it would be hard to keep it going forever because life is going to happen or u may wake up one day and decide that you don't want to do it anymore (maybe not 😁) but yeah man I can almost see the checkered flag and I'm ready to drive it and take it to some car events like Ford takeover or hotrod power tour or something like that or maybe some car shows even though it is not ready to win one of those yet😂🤣 still got to work on the interior and paint but it will be there in all of her glory 😁

[@GearHead704]

Pretty sure i'm going to Ford Takeover next year, so hopefully I'll see it there.

[@79beans347]

@@GearHead704 yeah I would like to go I've never been so if everything works out ok I'm going to go and my brother may want to bring his 65 mustang that I've been building another 347 for it and letting him work on it so he can learn and not have to me to do it everytime, my pushrods came in yesterday so I can hopefully get my engine finished up and ready to drop in, hopefully my intake doesn't need to be milled and hold me back another week but yeah I could have been finished already if I wasn't having to build 2 of them and port 4 heads and 2 intakes 😁 but it's coming together and wont be long hopefully and I will get to drive it for the first time 😁🤞

[@iamchazhaynes7074]

I’m still procrastinating the heater core replacement on my fox on my channel! 😂

[@GearHead704]

Yeah, I've still got to do mine too, just filmed on this one LOL.

[@carmob7499]

Another great video Matt , THX for sharing .

[@GearHead704]

Thanks Mobster. Glad you enjoyed it

[@miked8027]

Just did mine on my 86. After weals of procrastination , watching vids and reading online , I did it . I took my time and had it out in a few hours . Over the course of a few days I buttoned it up. Not that bad.

[@GearHead704]

Not bad at all man, nice work! I'm sure it felt great to get it done.

[@miked8027]

@@GearHead704 definitely a sense of accomplishment. Saved 600 bucks too.

[@Foxbodygarage_satx]

VERY GOOD detailed and informative video!!

[@GearHead704]

Glad you enjoyed it! Thank you.

[@Eddie510s]

Amazing info ! Thank you

[@GearHead704]

Glad it was helpful!

[@thefoxchamber]

Heater core and evaporator..... Been there done that. Aggravating work but satisfying once it's done.

[@GearHead704]

I still have to do it on my FHP 😩

[@spassmore8483]

Matt love the video that is one beautiful 4 eye and it's pretty cool that you have Matt from foxresto helping you with your build that guy is so full of knowledge and makes a lot of sense doing it the right right way the first time instead of cutting it up like I've seen other supposed informational videos and also directions on the evaporator core say to do I don't remember the brand but crazy when it's done right it last long like it's supposed to also. you're going to have one of the baddest of the bad SSPs and drop tops built right brother!!! Keep On Keepin On Buddy looking forward to your next video today... I got to this one a bit late thanks for the great informational entertainment I still learn something new from it every time which is pretty neat! I mean I know quite a bit but the little tedious things that Matt does (&has knowledge of) with that box by sealing it there correct way and everything makes a lot of sense along with all the other stuff that he helps out on or does...

[@GearHead704]

Hey buddy! I'm very glad you're enjoying the content, as you know I trust Matt on anything when it comes to these cars and how it should be from Ford. I also know you know a lot about them based on previous comments you've posted, but that's cool you are still getting some tips and tricks. I can't wait to get my vert running!

[@chrisplace3024]

Nice Job as always

[@GearHead704]

I appreciate that

[@Mustang5L5]

What’s interesting is I just installed an NOS evap and heater core in my ‘88, and the new Ford evap I bought years ago and have been sitting on DID come with the foam seals stuck to it like the original.

[@GearHead704]

Interesting, I wonder if they changed it at some point but that's pretty cool.

[@shednesshunting2578]

Great video and for me cause I have do this on my 82 project man that thing is fire 🔥

[@GearHead704]

Oh cool, this was good timing for you then. Yeah his 82 is so clean. Good luck with doing yours!

[@markrobinson3189]

Just found this video very helpful I have 86 that was overheating and found the problem was my heater core which I will replace...but I have inop orginal A/C and need to convert from r12 to the current refrigerant...I want the heat but not ready for the conversion ($$$) considering that I will have to separate the box is still a good idea to plug the new evaporator till I'm ready to install new hoses condenser and compressor ...want to be driving this spring

[@GearHead704]

Glad it helped and hope you are driving in the spring.

[@mikedambowic5862]

MATT! 😍 LOV THE HOW TO VID ,KEEP IT UP!

[@GearHead704]

Thanks as always Mike! The encouragement helps. I've got a lot more coming for sure with that SSP LOL.

[@carlosnsosa99]

Haven’t had to do that yet but dreading it

[@GearHead704]

Hopefully you don't need to anytime soon.

[@JayC-nr1mp]

Im still here champ great content like always mane 👊🏾

[@GearHead704]

I appreciate ya man, I"m sorry i've been slow on responding to the comments lately. Going to be doing a lot with the convertible on the channel soon though.

[@JayC-nr1mp]

@@GearHead704 I understand champ...but mane I can't wait for it

[@chrisplace3024]

I would bag and tag the screws

[@GearHead704]

It's not a bad idea at all. In fact that's a great idea.

[@RegularGuyGarage]

Don’t need to change it if you delete it 😉 🤣. Kidding. Man I love that car. I need a 79-82 fox

[@GearHead704]

Hah hah, that's true! I don't think a race car needs heat or air anyways LOL

[@79beans347]

🤣😂🤣😂 I bet you know someone that knows how to install a delete kit on a fox , kinda makes me think that I've seen a video that touched on the delete kit at some point 😂🤣😂

[@jpp9846]

Fun stuff....NOT! But changing the heater core and evaporator, is definitely a rite of passage for fox owners. I decided I'd pull and redo my entire interior when I replaced mine. Wasn't a fun job, but looking back at it...it certainly taught me a a bunch about my car 👍

[@GearHead704]

I thought you had done this one before. I think the best time to do it is when I need all the interior out anyway LOL

[@jpp9846]

@@GearHead704 you have a fresh canvas on the SSP! 😂

[@GearHead704]

LOL true

[@bendirusso3149]

Any thoughts where I can get a nos heater core for an 88? If not, what brand do you suggest?

[@GearHead704]

Give Fox Mustang Restoration a call during business hours at [phone]. We'll be doing one in my SSP in the future, and if he doesn't have any NOS I'll be sharing what I get instead with the channel. I'm personally not sure what that would be at this time.

[@malbran7050]

Hi matt, what is the name of the glue to seal the heater box.?

[@GearHead704]

Hi there, it's been so long ago now I can't remember at this point, I'm sorry

[@MrPooponastickable]

A pain if you want to do it correctly. I redid mine a few months ago in my ‘81. Switched to a later style evaporator.

[@GearHead704]

That's cool that you made the switch.

[@poorperformance8850]

How long did this take? I know the fox doctor makes it look easier than it is 😄 I need to do mine so I was hoping when I come to get the parts I dont have yet maybe I can persuade the dr with some cold hard cash to help with mine 🤑. I mean it is a mostly stock 85, his favorite year 😎

[@GearHead704]

About 6 hours I think. You never know what the Doctor Ordered LOL

[@ShaneHerald]

i see a lot of old/new stock popping up at this shop man.....tell you what i really need.....can Matt get or does he have the window regulators for both doors on my 85 T-top mustang????? ......

[@GearHead704]

I'm not sure if he has that or not. I will try to remember to ask, but your best bet is probably give them a call during business hours. If he doesn't have them he might know where to get them. There number is [phone]

[@robertprice9052]

I have an '87 GT convertible without air. How much trouble is it to install air conditioning in a car built without it?

[@GearHead704]

It's doable, but a lot of parts you need. I'd say not a straightforward easy job. Maybe we'll cover it on a video one day.

[@rickfox9825]

Hey guys hate to sound stupid but what year Foxbody are you referring to when you say aero/arrow cars and why? I’ve never heard that term before.

[@GearHead704]

There are no stupid questions Rick! Aero is typically referred to as 87-93 FoxBody's because for one thing they looked a bit more aerodynamic at the time.

[@rickfox9825]

@@GearHead704 gotcha makes sense thanks man! 👍🏼

[@timzzz9963]

how long should a replacement core last if its a newer aluminum model

[@GearHead704]

Not sure, but I'll try and remember to ask Matt

[@ufartface]

on max ac you wont get outside air and crud on your evaporator coil- it just recirculates inside air

[@GearHead704]

Just got the A/C working on mine. Sometimes I do Max, but sometimes not.

[@seansweeney7721]

So Matt what is the cost for your shop to complete this job for customers?

[@GearHead704]

Hi Sean, They don't usually do this job for customers. You can always give them a call and see if it's something Matt might want to do. [phone]

[@tonymustangmadness6642]

Do you have a heater core and AC for an 1989 GT original ford units

[@GearHead704]

Hi Tony, I'm not sure if they have any more, but give Fox Mustang Restoration a call during business hours at [phone] and they can let you know.

[@kurtwarnick4343]

Have they done a video on removing the smog pump and emissions crap?

[@GearHead704]

Don't have one on that currently.

[@kurtwarnick4343]

@@GearHead704 okay

[@jsboening]

Any videos on converting an old r-12 system to 134a?

[@GearHead704]

We plan to do this in the future Jeff. Thanks.

[@jsboening]

@@GearHead704 thanks. Really enjoying your videos. 👍🏻

[@davidnonnenmocher5122]

I had nos heater core leak

[@GearHead704]

Man that's a bummer, but I suppose anything is possible.

[@imakeituptoyou]

How many hours did this actually take?

[@GearHead704]

We took breaks off and on, but it was basically a full day of work for us, granted we were filming too, which slows things down.

[@classicstangbrn8964]

I just cheat and cut the back or front of the case according to you prospective, then you don't have to discharge the ac.

[@GearHead704]

Gotcha. I think Matt mentioned some people do it that way.

[@DeterminedVeteran]

What a messy job !

[@GearHead704]

Yeah, there's a lot to it.

[@carlosnsosa99]

Matt can you send me the info to send my A9m computer to Matt to Rt and fix ? Please and thank you

[@GearHead704]

Give Fox Mustang Restoration a call, but I would wait until Thursday or Friday as they are going to be in and out of the office Monday through Wednesday this week. [phone]

[@carlosnsosa99]

@@GearHead704 it has a bad transistor and my buddy tried to fix it but couldn’t do I was wondering what he would be able to do for me to get it fixed so I can have a back up for my 92 feature car

[@robertc1220]

Nice 82 gt interesting how to install Matt is meticulous as usual

[@GearHead704]

Yeah it was very clean. Thanks Robert!

[@chrisbishop7253]

First

[@chrisbishop7253]

Record holder???

[@GearHead704]

Probably. I know Jay C got a lot back in the day, at least 50, but I think your close if not at that. LOL

[@chrisplace3024]

It really sucks doing the heater core.

[@GearHead704]

I thought it was going to be worse, but then I got the easy task just filming LOL

[@mikestrand3747]

Lol garage door seal

[@GearHead704]

Man I put this video up so long ago I can't even remember what you are talking about.

[@chrisplace3024]

You would be smart to do yours before you put it back togther

[@GearHead704]

Agreed, 100% that's the plan bud

[@chrisplace3024]

@@GearHead704 Yeah remembering where all the screw go is tuff