Foxwell NT301 OBD2 Code Reader FULL Review & How To Check Engine Light on your car / Clear Codes..

Full review of the Foxwell OBD2 Code Reader. And how to check your car.
Using the FOXWELL NT301 OBD2: a.co/d/b3cA1B6
But same idea with most basic readers out there.

[@twrecks4598]

Just an FYI for Jeep/Chrysler owners: that code often times is simply the gas cap... but you may want to buy one from the dealer instead of a parts store like Autozone. I had a Wrangler, replaced the cap with one from AZ and the code came back. After a couple different tries.. I just went and bought a mopar one from a dealer and it cleared up. For some reason aftermarket gas caps don't always work

[@HowToWithLech]

Yeah. I got the mopar one 👍

[@zmaninpgh]

Will it show if you have a bad coil pack? Don’t you have to have the car running to show some of these codes thanks for the video. Very informative.!

[@HowToWithLech]

Not sure about this unit. But from what I heard it should , and yes for that I think car would be running. Just never did it so can’t confirm

[@mikebreler9724]

If my car is cranking but not starting, and I want to confirm that its not something besides the fuel pump; will one of these analyzers work if the engine is just cranking or if just the ignition is on? Thanks for any guidance.

[@HowToWithLech]

Hard to tell . Could be many things.

[@Elwood470]

How do you reset the check engine light?

[@HowToWithLech]

It’s shown

[@anolajordan3032]

Does this scanner access the BCM?

[@HowToWithLech]

I believe so. But I would say check mfr specs or manual

[@rtaylor3670]

Update what fixed the car ? Thanks

[@HowToWithLech]

Fuel Vapor Leak Detection Pump replaced. And new gas cap

[@guapora]

Does it works on Honda Civic of 1997 ! with 3 pins conector ! it’s EODBI

[@HowToWithLech]

honestly not sure. woudl check mfr site for specs and compatibility.

[@dreamrelaxation7239]

What does component test do? I've watch seven videos and everybody skips thru it.

[@HowToWithLech]

I’ll check it out and try to do follow up

[@PaddyBoyBKLYN]

Can it be powered using the USB if power from the cars plug doenst work?

[@HowToWithLech]

Not this one.

[@2bnax]

GOOGLE POSSIBLE OPTIONS, THEN ,IF NECESSARY, SCAN AGAIN FOR POSSIBLE COMPONENT FAILURES ...MAKE USE OF THE SCANNER BEYOND THE BASICS UPDATE: GOOGLE IS NOT NECESSARY, THE INFO IS ON THE SCANNER; A BLUE QUESTION MARK WILL APPEAR ,CLICK ON IT , & THE POSSIBLE CAUSES WILL BE SHOWN

[@HowToWithLech]

👍

[@eltoroloco1936]

Man, I kept hitting the blue button and thought the machine might be defective because the same screen kept popping up. Haha. Good ole operator error on my part.

[@HowToWithLech]

👍

[@bokarker4420]

So Weird Tutorial - no flow...

[@HowToWithLech]

👊

[@emroe8488]

You don't know what you are talking about.

[@HowToWithLech]

Yup 👍

[@jeffmech600]

BUY BLUE DRIVER. THIS THING SUCKS