After A Year With The Secretlab Magnus Pro Xl, Here's My Honest Review

[@Secretlabchairs]

Great video! thanks for the detailed review, and we're glad the cable management tray has worked perfectly with your setup. We also appreciate the feedback with some of the things we can improve with the MAGNUS Pro - we'll relay this with our Product team to note on how we can further work to fulfill more needs from our desk users. Cheers Fracno!

[@LockhartTx]

I'm considering this desk, but I have a 34 inch widescreen as my primary and my second screen i have on a pole mount above the widescreen. Is there an option for a taller arm? I'm not a side by side guy.

[@ArafasusTV]

get an external arm, not the secret lab one, for sure one with low profile would fit inside@@LockhartTx

[@cedricol]

@@LockhartTx I'm also considering this desk, but I also have issues with their monitor arm. My G9's 49" & 12kg are both far above the arm's 34" & 8kg limit. And their PC mount is too small for a H500 case. Those are deal-breakers for me. I contacted their support to see if they has something on their roadmap to fix both issues or if they could recommend a competing arm that's compatible (ie. fits the cable tray opening like theirs). Waiting to hear from them.

[@TonieBasulto]

Hey @Secretlabchairs! Perhaps you can actually provide a phone number to your customers so they can troubleshoot a desk that did not work out of the box? Folks, if you are considering this desk, please be aware that customer service is extremely limited, and they will make it very hard to leave a review on their website.

[@invoke4485]

@@cedricol There is a heavy-duty arm for up 42 inch monitors.

[@stanleefanatic]

For those using their monitor arms on the desk and are concerned about putting it on with the minimum space because of the cable management lid, you can very easily unscrew the lid and put it back on after you attach your monitor arms. There is tons of space and it is super easy to take the lid off and put back on. Just 4 screws.

[@Captain-Chats]

Can you use any monitor arms or is it only their arm you can use, I’d rather use what I have

[@stanleefanatic]

⁠@@Captain-Chatsyou can use any monitor arm with a clamp it’s just easier with the secret labs arms because it screws the clamp tight from the top. To be able to put others that clamp from the bottom on easily, have the cable management lid screwed off and attach it before you put any power brick or even cable management down. It really isn’t hard. I have both secret lab dual monitor arms and dell’s dual monitor arms, which I both used on the desk at some point.

[@MindfulMusic]

What blows my mind is how these two companies have the support leg thicknesses in reverse compared to others. This has been shown to be one of the major key factors in that extra wobble. The frames w/ the 3 stage support beams w/ the thicker legs that reduce to the smaller ones are just better.

[@mantistoboggan4783]

I couldn't wrap my brain around that.. isn't it common sense that reverse would result in decreased stability?

[@kingofgames234]

Yes that is true but the trade off is the ability to use magnetic sheathes to cover cables. Not just theirs either, any magnetic raceway for the leg

[@negligentavarice]

The entire goal of a UPS is to provide surge protection and a backup battery so that you can shut everything off before it dies. As long as you aren't coupling another surge protector in, you are allowed to use a power STRIP in the cable management tray and plug the power of the desk into the ups to keep the entire operation running with one cable! Feel like this is most useful if you have any short cables, though.

[@gnack420]

Yeah I was a bit confused by that section, I didn't understand why you wouldn't just use both

[@danimalfpv7261]

@@gnack420 Same. I was doing electrical math in my head about why that wouldn't work. I suppose if you put the main workstation power into that strip in the desk, then went to ups you could overload that wire. Doesn't matter though. PC is hanging next to the leg, so just power the monitors and desktop peripherals and that won't be a problem at all. (I say without knowing for sure)

[@Areyouduckingserious]

😂😂😂😂 fr

[@timschmidt5469]

Thanks for also providing a "complaints" section! Really good to know to make a better decision.

[@dylanc6856]

Missed seeing your vids, man! You have such a calm demeanor and way of speaking. It really makes for enjoyable videos, no matter what you are covering.

[@Comrade_Broski]

As someone in IT, I really appreciated you advising people to use a UPS 👍 great review

[@DudeWutWhy]

I'm considering using a UPS, but purchasing the PC mounts with the tower on one side, and the UPS on the other.

[@RiderZer0]

Is really more beneficial to use a UPS over a power conditioner?

[@Shiro144_X]

​@RiderZer0 get both id say. Surge protector for the first line of defense and the UPS for the second. Relying solely on a UPS in my opinion is just stupid if your truly worried about protecting your technology. While a UPS protects it, it'll ultimately over time lead to some minor damage to add up over time which can cause system failures with your tech. The surge protector takes the brunt of of the damage then the UPS for the remaining that gets past the surge protector.

[@OriflammeGaming]

@@Shiro144_X please do not recommend to people that they plug their UPS into a power strip. That is extremely bad advice.

[@Shiro144_X]

@OriflammeGaming you sure about that? If your stupid and don't know how to do it correctly then ofc but if your actually competent and know what your doing then it's actually somthing you should do. Like look it up. So long as you know what your surge protectors wires capacity is and don't overload ot your fine, ON THE OTHER HAND, if you just plug in things that take alot of power then yeah your stupid and you'll fuck shit up.

[@jordans9663]

Really appreciate the in depth review. I'm in the market for a new, bigger desk and love that secret labs has a bunch of accessories

[@HassThaMann]

Good to see you are back on KZbin. I need my gaming health guru

[@DJSpencer]

One thing that I wish the Magnus Pro had which other desk have is the ability to have casters. You can get aftermarket ones but you're kind of on your own in buying them and making sure they're the right size and can hold the weight. I would prefer that SecretLabs just provide the option to buy them as an accessory.

[@anpc86]

Which casters did you get?

[@faizrochmad6630]

Is there any problem connecting UPS to desk built-in power outlet instead?

[@fierylight2009]

Many UPS manufacturers specify using a powerbar (which desk essentially is) could void your warranty. Good UPS will be able to tell the computer to shut down so that shouldn't really be an issue if you considering having this type of desk.

[@Yue665]

So I have the exact same desk, and I'm not sure if anyone else has mentioned this, but the Secretlab Magnus Pro isn't exactly "all metal"; that part's a little misleading. It's really a sheet of steel veneer on top of MDF material. You'll be able to see that if you look under the desk, as the metal wraps around just under the edges. I was originally a bit concerned with the desk weight since I thought it was all metal, but using MDF makes sense to keep the desk from being ridiculously heavy and expensive. And it's still pretty durable material. It's at least relatively safe to get the top surface wet, and unlikely people will soak the bottom of it. It does also mean you can't really mount things magnetically under the desk though.

[@mldnighttruffle]

dude i just assembled mine yesterday and i waiting the entire video for you to talk about trying to center the magnetic desk mat. i literally spent more time getting it aligned properly that i did assembling the rest of the dest moniror arms included haha

[@gnack420]

I'm curious, if you went without the full sized magnetic desk mat and went with your own regular mat instead would that work? Or does the included desk mat serve some other purpose as well?

[@galiard196]

@@gnack420 Seeing as he hasn't replied, from what I know about the desk (I do not have one) it looks like you could absolutely use your regular desk mat instead. The magnetic ones do not appear to provide any other function besides aesthetics

[@Quartz5005]

I like how the cable management works in the desk because its something that a only company like Secretlabs can do. Like I understand why every company doesn't do what Secretlabs does but with the Secretlabs desk it feels like you're getting your money worth.

[@srchubz]

appreciate the review, was just looking at either the Pro XL or making my own using sit/stand hardware. The wobble portion floored me. Appreciate it again

[@thomasdrake6273]

Bruh, thank you for such a well put together detailed review of this desk! You helped answer most of my questions and this lead me make my final decision!

[@PHDMcstuffin]

Cant you just plug your desk into the uninterruptable power supply??? I don't know much about them.

[@joffsie]

That's exactly what I was thinking...

[@narpt]

"I Know myself I know I shouldnt just have.. free desk space" haha I love this, good transparency of character is what makes your videos YOUR VIDEOS franco, love it man, great overview.

[@THOMB]

As if I find Mr. Narpt on a random tech video 🤣🤣 hole you’ve been alright dude

[@narpt]

​@THOMB you just went full circle dude!! Loop/MattRadical/Franco we all know each other outside of the virtual space 😂

[@gnack420]

That's me too, but boy does that not stop me thirsting for that extra space

[@BiXàiGì]

Your take at [11:40] is spot on! It’s exactly what I was looking for in a review.

[@lovepeaceandharmony5385]

@5:42 sieht man einen Beistelltisch wo der PC drauf steht. Weiss jemand was das für ein Tisch ist und was er kostet? Ich brauch auch so einen, am besten mit schwarzer Tischplatte.

[@roninstormYT]

please tell me i can pt the elgato low profile arm in the back if not i just clamp it too side i soon get this for chirtsmas but i just clamp the low profile elgato arm in the front too my right side

[@FracnoTV]

I have the same arm and it’s clamped to the left side in front. But it would work on the back as well.

[@bkthreee]

thanks for the video man!!! been eyeballing this beauty for a minute!!!!

[@FracnoTV]

Glad I could help!

[@jimmytimber7074]

I just got the smaller version. They are very nice desks. Spendy but I don't think there is a cleaner desk out there.

[@JoesirisReborn]

First video of yours I’ve watched and your a natural! Keep up the comedic relief bits! You’re super funny

[@tomohalloran5217]

I've got a magnus pro xl. I've got triple monitors two pcs on the pc mounts and a stack of accessories on the desk like headphones and speakers and stuff. It's a awesome desk no two ways about it. I find the cable tray could be half again in size bigger and those cable routing clips on the monitors have caused me massive grief with the amount of cables I'm running (if I move my monitor they click out of place and hang down) for someone with less stuff I reckon u wouldnt have any issues. I'm 186cm tall and I have no issues with monitor height on the monitor stands. I'm using triple 27inch monitors and they can go uncomfortably high so I'm not sure how high this guy wants them or how tall he is but thier going to be fine for the majority of people. Desk is wobbly at full stand height but not unusable by any means. I'm finding keeping the leather desk matt dust and cat hair free to be one of the biggest issues as dust tends to stick to it

[@FesterWerks]

Helpful additional info, thanks!

[@garycoleman8906]

would it be better to buy the desk without the desk mat?

[@tomohalloran5217]

@@garycoleman8906 no the desk matt is awesome. And the steel top is quite cold without it. It's just worth noting its leather (or something equivalent) and dust kind of sticks to it a bit. Nothing a decent wipe down every few weeks doesn't fix.

[@3litepker]

@@tomohalloran5217if you use it as a standing desk do you need to bring it up to the max setting at your height? Also, how wobbly would you say it is when you use it as a standing desk? Pretty on the fence just because of this one issue. Please like my comment once you reply so I get a notification, really interested to know

[@tomohalloran5217]

@@3litepker Im probably about 10cm short of max height for comfortable standing height. The desk wobbles but it's not to bad it probably can move about 1cm forwards and backwards on it's pivot point. It's by no means the worse standing desk I've used at height

[@MaxFluff]

awesome video! everything I wanted to know in 1 less than 15 min vid! thanks man

[@breadmaster-lee]

I'm looking into this desk now that they have it in white especially because unlike most desks it can go down to 25 inches which is great for short people. The cable management alone is why I want to buy it!

[@jermbarnett1]

Just Recently purchased a desk from them. It showed up damaged. They have the worst customer service you will ever deal with. There is no phone number. Every time you email it takes 4-5 days for them to respond. When they do reply it's almost like an automatic generic reply from AI. Really enjoyed the desk even though its damaged. Again this company has the worst customer service you'll ever deal with. Because there is no customer service..

[@adamgoodone9161]

Thanks for this. Hate terrible customer service, gonna gun for the uplift desk.

[@CactusSnD]

I’ve never had a problem

[@taquitos459]

Ya I’ve actually had the opposite experience and had very prompt replies and took care of my warranty claim super fast

[@imorokr]

⁠@@taquitos459thanks for this. Love good experiences, gonna shoot for the magnus pro

[@JSamsung12]

Sorry that happened to u. I bought 2 chairs at different times from them and had the opposite experience

[@QuoteUnquoteErik]

Great video man! Love it when new ones come out.

[@FracnoTV]

More to come!

[@QuoteUnquoteErik]

@@FracnoTV LET’S GOOO

[@aegontargaryen573]

Be safe? What do you mean? If I plug a surge protector power bar into the mag pro xl up top where the rgb lights are that’s not safe?

[@FracnoTV]

Surge protector should be bare minimum, I prefer the added peace of mind of a UPS.

[@aegontargaryen573]

@@FracnoTV ok thx 🙏

[@FatherandSon996]

I have seen others assemble this table and not a single one has to make their own holes, everything looked so easy to install.

[@MisterO.S]

Thanks for uploading again! I missed your videos!

[@americanghostproject]

1:55 made me laugh. Dude, don't we all. Thanks for this review. We are moving into a new Studio space and I have been weighing getting one of these. This video made it a lot easier to make that choice.

[@mrgusse]

Regarding wobble, the casters will introduce alot of that wobble. I have a desk with the same leg contruction which does not wobble nearly as much as yours did in the video.

[@FracnoTV]

I had the Uplift desk for about 3 years before I added wheels to it so I'm very familiar with how much it wobbles. Any standing desk at max height on two legs is going to have significant wobble regardless of whether it has wheels or not. I shook both desks in this video much harder than anyone would shake a desk.

[@tomhilmer576]

Before I saw this video, I was literally choosing between uplift and the magnus pro. Thank you

[@kanyao]

I have the "commercial" version of Uplift desk that has a supporting beam connecting both legs. I feel it wobbles a lot less compared to what your video shows. I also love the Secretlab Magnus but wish 1) it comes in a 80x30 size and 2) it's more stable.

[@KingRen420]

r u saying the magnus pro isnt stable? lookin at options to buy and am curious

[@kanyao]

@@KingRen420 There are other review videos on the magnus pro and one common compliant is it’s not stable at max height. I do not have that desk (it came out after I made my purchase).

[@mytrung]

Also wish they gave more clearance for most other types of clamps so you can attach other monitor arms, mics, stands etc.

[@CosmicApe]

Couldn't you use a power strip connected to the integrated power cable and then run that from the base of the leg to a UPS? Essentially just extending your power cable?

[@dyrdevil5126]

Glad to see your content again! #setupgoals

[@HydeParksMusic]

does anyone know if there are any concerns about the desk mat being magnetic or any of the other magnetic pieces interfering with audio gear? possibly damaging gear and hardrives?

[@Switchess__]

I just bought this desk and I want to get their arm mount but was told it wouldn’t hold a monitor vertically. Can you use the arm with a vertical monitor?

[@jurig5579]

Could you please tell me the distance from the edge of the table to the center beam on Magnus Pro XL? I want to make sure my knees won't hit it while sitting.

[@DaGoat772]

What shelf is that and how is it mounted? I like how you have the monitors mounted to the actual desk and still can fit the shelf in there. I don’t think that would be possible with the secret lab shelf.

[@DanExclaims]

I'm a youtuber/streamer that needs a good L shape sit to stand, got any recs?

[@Tony2438]

I couldn't ask a question about the cable. Management sleeve I have to get one as my case is too big for the pc mount and will have to put it off to side like you have so I can lift the table would you be able to give me the name or a link of the cable sleeve or even some thing similar I been looking but found nothing yet.

[@samirbhargava5]

Just ordered mine $1300 later great review this helped me this will look sick with my Batman secret lab chair for my home office setup

[@TylerStorm-oj8vj]

I have a question I haven't figured out yet; I want to run a quad monitor setup, three x 32 inch and a single 28 inch. A vertical 32, then a 28-inch horizontal, above a 32-inch horizontal, and then another vertical 32-inch. What's the best way to go about utilizing this desk?? Two dual arms or 4 singles?

[@jeremiah09vu]

Top of the desk is metal and the underside of the desk is actually wood. So attaching a small drawer is fine, so as long as you use small screws 👍

[@trashitty9854]

Can you lock the height to not make it moveable via the button?

[@DJFusia]

IS the whole desktop a magnet? I am looking for something for my music studio and having magnets would not be good for my studio monitors?

[@TK-le8wd]

Would this support two Odyssey G9s on an arm, or would it be a bow or sag issue?

[@michaelmasur1542]

what if you have logitec mousepad charger will that be a problem with this tabel?

[@WireBug]

Mount the monitor arms to the riser, worked perfect for me and gave me the vertical height I needed

[@derekdipietro9805]

An additional 10 years of warranty is crazy. Makes me want the other one.

[@simonjanssen4339]

Great review. I use one myself and I'm pretty sure the table top itself is just good old mdf with a metal plate wrapped around it - you can feel and see where it starts. So I think you should be good mounting the drawer.

[@crazun6209]

Not sure if you have tried it yet but the underdesk Tower mount is amazing and I love it !!

[@LordCommanderVex]

5:58 you know you can put a power strip inside the desk, plug that into the cable extension on the side leg, then plug that into a UPS, right?

[@FracnoTV]

I prefer not to daisy chain so many devices (10 devices into one extension, then all of that load into one outlet in the desk, then out of the desk into a UPC, then UPC to wall) when my current method works well (10 devices into UPC, UPC into wall). Yes, you could physically do it, but I'd rather not test the limits of electrical load with all my gear/devices.

[@flyingpigsco6113]

It specifically says on most ups manuals not to connect power strips to the ups. Mostly because power strips can be dangerous if you plug in to many devices into one.

[@LordCommanderVex]

@@flyingpigsco6113 yeah if you go above 3600W in total on them but there is literally no danger otherwise

[@derwinraymond8358]

But can't you plug the desk into the ups? Then plug the stuff into the desk?

[@Nunya1721]

Wouldn't it be possible to plug everything into the integrated power strip, and then plug your desk into the UPS?

[@BrightRedStrawberrry]

Ideally you wouldn’t want the ups to power every single peripheral and just be for the pc

[@39grilly]

Thanks for the great review, I work from home and my WFH and gaming set up are using the same space so Ive been thinking about upgrading my cheap amazon L desk to this to be able to house all of my monitors switches and cables

[@crockpotcrumble369]

What's that wrap that you used to join all of the cables running out of the bottom of the cable tray? I bought a Magnus Pro XL the other day and I am trying to come up with an easy way to keep cables together that run to my UPS.

[@naomipower8906]

Literally Outstanding!❤️

[@scunier385]

Love the vid!! Keep up the good work man

[@kittyoverlord_]

This video cured my diarrhea

[@pmnelson81]

For anyone who bought this desk, do you have to be home to sign for the delivery or will they leave it at the door?

[@Gatto2K]

great review man , thanks so much.

[@chipdamage9374]

Anyone know if the PC mount can handle a full tower custom rig?

[@srchubz]

fully extended the PC mount supports PCs from 14-21.5" tall and 6.7-11.8" wide

[@srchubz]

oh and up to 55 pounds

[@a.caguax78]

@11:55 flashing a garbo on us pleebs + gundams = new subscriber.

[@FracnoTV]

There’s a few spicy caps on my keyboard as well 👀 12:08

[@FracnoTV]

What kind of desk do you use for your gaming setup?

[@artesianglitch1652]

Ikea

[@MisterO.S]

Not Sure

[@MaxFluff]

an Ikea Thyge Desk

[@giff74]

I have the Ikea desk that Ali, Optimum Tech, has. I've had it for years and it's doing great. When he upgrades to something even more minimal I'll probably buy one too LOL! I enjoy your videos, I wish you could upload substantial pieces of content more often.

[@brochill4692]

Your back, cause you're that ripped & can hold the weight

[@IAmBPala]

Awesome video!!! Glad you were able to manage those cables ;)

[@christopherwilliams5808]

Im thinking about buying one of these desks. Id have to go with the smaller version tho because of space restrictions but i might be able to do XL. However if i got the regular size.. Id like to have my mid tower PC sit ontop of the desk and id like to get a secert lab shelf riser. And also have duel monitor set up. Both monitors would be 27 inch. Would all that fit ?

[@srchubz]

the XL model is 70" wide. The standard model is 59.1" wide (so a no go for your set up)

[@piplup10203854]

Is a UPS that necessary? I didn't account for one in my budget. I was looking at getting this desk and upgrading my pc but I am still unsure. I don't want to spend a lot of money

[@EdeWillians]

Would you recommend it case I have to use 4 monitors ? I am worring if the table you lift easily or not.

[@FracnoTV]

The max weight is 265 pounds and I think it’d handle 4 monitors no problem.

[@ethenjordan2010]

I have a 4090 and a 1000watt PSU, what UPS should i be using? I didnt see yours listed. Thanks

[@flyingpigsco6113]

There are websites that will tell you the estimated wattage of your build based off your equipment. There is really no way to truly know your peak wattage until you measure it yourself with all your components and peripherals plugged in I'd say with a 4090 & 1000 watt psu assuming your power supply provides enough power to run everything depending on your cpu & how many devices you have connected among other factors you could be looking at anywhere between a 750 watt or 1000 watt ups. 1500VA most likely would be fine there's alot of factors.

[@flyingpigsco6113]

You probably want a ups that would supply 120% of your estimated required wattage.

[@Loop2win]

The goat is back!

[@ohcanadaguy]

I would love one of these, but stability at height is a must for me. Wish they had a 4 leg option

[@leonardkim8631]

Can Secretlab staff help to assemble the desk on-site if I don't want to do it myself?

[@macanderson4322]

This has to be satire 😭

[@leonardkim8631]

@@macanderson4322 They do offer on-site assembly service in my country.

[@laszlodemeter9836]

Is it possible to plug the desk's power cable into the UPS? It would look cleaner, no?

[@FracnoTV]

I prefer not to daisy chain so many devices (10 devices into one extension, then all of that load into one outlet in the desk, then out of the desk into a UPC, then UPC to wall) when my current method works well (10 devices into UPC, UPC into wall). Yes, you could physically do it, but I'd rather not test the limits of electrical load with all my gear/devices.

[@jbeeches1]

HI nice desk i have a new S24 u PHONE which has a metel back would this be a problem ?

[@amandafekety2297]

ok, I'm going to ask a dumb question: why can't you use the built in desk plug, and then plug the DESK into the UPS?

[@mileskt9232]

ive seen some etsy third part accessories for drawers and such if you need.

[@ITCodex]

Regarding pole mounts for monitors can I use mine as I got use to them and don't want to spend extra money

[@FracnoTV]

You can use any arms so long as the bottom portion of it isn't longer than the depth of the tray. It just won't be as convenient.

[@MrMassivemeatlog]

How was the wobble with the monitor arms when at sitting height?

[@redalertlaserbeak7244]

Can’t you just plug everything into the desk, and then plug the desk into the UPS?

[@LearnMoreAboutMusic]

Can you mount a Microphone Arm on the Magnus Pro?

[@FracnoTV]

Absolutely, I have one mounted in this video on the left side. You can mount anything to this desk, but the sides of the desk are limited because of the leg frames, so keep that in mind when you plan on where you'll mount things.

[@xavierfischer6618]

I think i agree about the UPS 🤔 Over the desk outlet

[@randomdude5378]

Does the mat function like a mouse pad or do I need to put one on top of it?

[@Panchirito_Official]

Just got mine and mine was damaged I threw away the box it fucken beat up and hopefully support will help me. It has really sharp edges on the side of the table and on the back side

[@ElizabethGreen-kv6rx]

One day I will be laying down at some park on some field after a nice bike ride and Watch the clouds go by...I'm sure this is what I will be dreaming of :-) Absolutely Breathtaking

[@DavidHernandezLovesYou]

VERY helpful review! Thanks!!!

[@Wadson]

Whats that little wood riser you have where your accessories are sitting on? aff link?

[@snakebite2]

What's that desktop tower stand you're using? I've been searching for that exact thing you're using without any luck.

[@prophet_alers]

what mounts are you using to fit in the back and sides for the key lights and mic

[@mc20piece]

Why didn’t you just plug the desk into the UPS?

[@furqanamjad9024]

Are we unable to use other brand Monitor mounts with the Magnus pro XL?

[@FracnoTV]

You can use other mounts, it just won't be as convenient. If the mount has an unusually long tension rod, it may not fit in the tray but it would work fine on the sides of the desk. I use a non-Secretlab mount in this video.

[@furqanamjad9024]

@@FracnoTV Hey thanks for the reply! Could you please share what mounts you have? So i can look up their specs and try to get something similar :) Thanks!

[@jeanm182]

Thanks for sharing dimensions using the metric system, very useful for most of the world😅

[@I-Siamak-I]

Can you please share where you got your Action Figure Display? ( the one with glass door and wooden levels ) on the left?

[@tcghunter9196]

Can you not just plug everything into a power strip in the cable management then run the plug at the bottom of a desk to a UPS? Obviously that takes you from plugging multiple things into the UPS down to one cord which might not be ideal for power draw but should work, right?

[@Usykay]

Would this desk be good for someone 6ft 5? At max height

[@srchubz]

goes up to 49.2" tall

[@jaharitucker3953]

Best review I’ve ever seen 🤙🏼🖤🖤

[@TheJay1979]

Im a little new to this, so dont kill me for this question please .... Why cant you just plug the desk itself into the UPS?

[@jayglawk3254]

Hey Man just tuned into your channel. You did an amazing review and i pulled the trigger buying one. Im excited. Subbed too. Take care pal.