Tap to unmute

How to Make an Iron Man Suit | 3D Printed MK85 Cosplay - Part 13

  Рет қаралды 29,509

Frankly Built

Frankly Built

Күн бұрын

The Backpack is done! The Electronics are fancy! And the suit is taking some damage! Let's recap some of the stuff I left out in the last update video and talk about the ENTIRE Electronics system!
▼ MENTIONED IN THIS VIDEO
Paints + Products| amzn.to/3DckIES
MK85 Files| bit.ly/3go7Fq5
MK85 Helmet| bit.ly/3mp50Ai
Hand Files| www.thingivers...
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com...
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is sponsored by Phrozen.
Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#ironman #cosplay #3dprinting

Пікірлер: 179
@Zeks2high
@Zeks2high Жыл бұрын
My mum said it's my turn to get pinned
@FranklyBuilt
@FranklyBuilt Жыл бұрын
Tell mum I said hi
@Zeks2high
@Zeks2high Жыл бұрын
@@FranklyBuilt sure thing
@muhammadamaar7936
@muhammadamaar7936 Жыл бұрын
​@@FranklyBuilti just wanted to say that i absolutely love ur amazing vids and i want u to keep it up and NEVER STOP
@AxeRoseIndustries
@AxeRoseIndustries Жыл бұрын
I think it’s time Frank builds a Hulkbuster suite.
@cooperweller5472
@cooperweller5472 Жыл бұрын
He liked it!!!
@cooperweller5472
@cooperweller5472 Жыл бұрын
Does that mean it’s happening?!!!
@cooperweller5472
@cooperweller5472 Жыл бұрын
Leaked iron man suite prodject?!??!
@Squires_cosplay
@Squires_cosplay Жыл бұрын
The best part about this hobby is making stuff, and then realizing everyone makes it slightly differently, and using those differences to improve your own builds!
@noahprincivil103
@noahprincivil103 Жыл бұрын
Frank hugging his suits is something i meed to see more often🤣
@kylejobs-yr1df
@kylejobs-yr1df Жыл бұрын
Just love seeing that suit cracks and all. I really like that wire hiding idea you had. Never would have thought of that I’ll keep that in mind. Thanks again for everything you do.
@whiterabbit6091
@whiterabbit6091 Жыл бұрын
Your incredible doing these project.
@max_hairloss
@max_hairloss Жыл бұрын
I just finished printing my very first helmet (Hanta Sero) and about ready to start post processing and hooking up electronics, so these videos really help prepare me for what to expect in the future!
@dragonscalier3576
@dragonscalier3576 Жыл бұрын
Man i love your content, i found it from a random yt short back in oct of 22. I didnt realize how much ground 3d printers have advanced and what you could do with them. Im a big surperhero fan and everything you build is right up my alley. Love your content. Only recommendation i could make is maybe do a video showing off your helmets 😂
@HeroicZebra1201
@HeroicZebra1201 Жыл бұрын
I love the videos! I just started my first big project with 3D printing about a year after starting and I’m using your tutorials to get through setting up the files, to welding and finishing. Thank you!
@woodsman9427
@woodsman9427 Жыл бұрын
what you doing if you don't mind me asking
@HeroicZebra1201
@HeroicZebra1201 Жыл бұрын
@@woodsman9427Full size BOTW Master Sword
@motzartzghost
@motzartzghost Жыл бұрын
Same for me ,videos from FB are so well put together, not a KZbinr , but a presenter
@johnrourke8781
@johnrourke8781 Жыл бұрын
Your videos have changed so much I love them
@vummee-tech
@vummee-tech Жыл бұрын
Thanks for the update. Always enjoy your videos.
@recall1045
@recall1045 Жыл бұрын
You could use that V1 chest piece to make a bust display maybe, that could be cool
@CoachHomeUK
@CoachHomeUK Жыл бұрын
Just had to skip forward to this one just to see how it's all gone. love the way you owned up to missing loads out. we have done the same with our bus build so now going back and filling in the gaps :D But in the meantime, I'm building the Mk 85 :D lol
@ChrisJohnson-tn1mo
@ChrisJohnson-tn1mo Жыл бұрын
So much work and engineering goes into making these suits. 😅 I’m still yet to even finish a helmet let alone the whole suit. I will get it at some point. I made the mistake of letting it be known at work that I 3d print so coworkers keep asking for stuff. Lol So far I have custom 3d modeled 3 parts and working on a forth. Your videos inspire me. Thanks Frank
@mrharmless297
@mrharmless297 Жыл бұрын
I’ll be watching this whole series next year
@Boodster61
@Boodster61 Жыл бұрын
I would totally love to mount that MK1 chest piece on the wall in my cave!
@legolegendzyt
@legolegendzyt Жыл бұрын
I would personally love that chest plate
@Cufc08
@Cufc08 Жыл бұрын
Great insight again frank. As you know your build has been my go to for inspiration and guidance. I would however like a closer look at how you’ve done the buckles/Velcro on the chest back and neck. I think that is a great way to attach and put on/take off. Even the elastic in the jaw, great idea
@lakemast
@lakemast Жыл бұрын
Thank you Frank! You've helped us all sharing your journey!
@AKIOCainus
@AKIOCainus Жыл бұрын
The chest would be cool to have forsure once again another banger video 🔥 these updates make me excited to rewatch both old build series again and follow the new one while I build my suit
@mikemccabe2758
@mikemccabe2758 Жыл бұрын
Frank do a giveaway, it would look great on a wall. Thanks for another great video
@brandonpierce2074
@brandonpierce2074 Жыл бұрын
I spy parts of the new suit on the ground in the background and some of the pieces look familiar to the ones I’m printing 🙂 can’t wait for the new build videos it will be awesome to have some video guidance on the same suit I’m attempting to print.
@Nomadx83
@Nomadx83 Жыл бұрын
Yeah the new suit will be a mix of Do3D, Vek and Joe
@94conman1
@94conman1 Жыл бұрын
Im realy realy tempted to start an ironman suit once i finished my jetpack for my mando but its the coding that puts me off lol trying to do a electric blaster and iv had no luck with it lol
@Kaki4w
@Kaki4w Жыл бұрын
Wow nice
@camtron1967
@camtron1967 Жыл бұрын
You aren’t a jerk. You have us extra mk85 content. 😂
@joeforgotten7746
@joeforgotten7746 Жыл бұрын
“Not even one letter” dude yes! Haven’t heard a reference to that movie in a while lol.
@goobiesgamegarage4517
@goobiesgamegarage4517 Жыл бұрын
Biggest take away from this is Frank had no idea how this was all going to be when he got to work. Sometimes I let it stop when I dont have a complete plan. Plans change and thats ok. Getting started is the key.
@notDom09
@notDom09 Жыл бұрын
Im planing on making an Iron man suit and you were the inspiration for this idea
@DannyBob526
@DannyBob526 Жыл бұрын
Maybe a charity auction for the chest plate?
@jtmb1029
@jtmb1029 Жыл бұрын
Do a Give away! You don't realize how many people are inspired by your work and would love to have it and signed! Myself being one! Keep Rocking It!
@JohnMcQueen-w7q
@JohnMcQueen-w7q Жыл бұрын
Yes, do a giveaway for the front chest piece. Hope you enjoyed England
@JohnMcQueen-w7q
@JohnMcQueen-w7q Жыл бұрын
Love the 85! After I'm done with 39, I may have to build it ahahahaha😅!
@streaming_mit_nino7945
@streaming_mit_nino7945 Жыл бұрын
Love your videos! I use many of your tips for printing my own Halo MK IV suit!
@TheWolfWorks
@TheWolfWorks Жыл бұрын
Oh dude thatd make a pretty sick battld damage wall piece
@stevensimmons1515
@stevensimmons1515 Жыл бұрын
Giveaway sounds great
@X-gaming282
@X-gaming282 Жыл бұрын
Are the suits and masks for sale on the internet
@darthbanemdnt
@darthbanemdnt Жыл бұрын
Give away idea is a great one.
@lolz180
@lolz180 Жыл бұрын
For my white and gold mk 85 suit im working on, I came across the same lighting cover as you. Instead of using tape however, I cut out pieces of plastic from the flat sides of a milk jug, and then sanded them a bit. This way, when a light was shone behind it, the light appeared more translucent or whatever the word is, I forgot what that term is called at the moment lol
@lolz180
@lolz180 Жыл бұрын
Lighting cover problem^^
@jcdixon01
@jcdixon01 Жыл бұрын
no ragrets, not even one letter...I understood that reference (to quote Capt.) Keep up the great work Frank!
@RedWoodPies
@RedWoodPies Жыл бұрын
I wish i had one of those suits
@arowe231
@arowe231 Жыл бұрын
I'd love to have it to hang up!!
@ninjanate072
@ninjanate072 Жыл бұрын
For your next project could you make a set of colonial marine armor from aliens? That would be amazing
@austinkramer379
@austinkramer379 Жыл бұрын
I would love to have that chest piece
@94conman1
@94conman1 Жыл бұрын
Give away great idea sign me up for that bud❤
@creatorkarl5968
@creatorkarl5968 Жыл бұрын
Thanks for the video update Frank 👌
@Najee_Stith2117
@Najee_Stith2117 Жыл бұрын
Dude you should make the predator mask that would be hecka cool
@stSgtMunoz
@stSgtMunoz Жыл бұрын
So what 3D printer would you recommend to start my own Ironman suit? Take into account that I want the best but I have zero experience. Thank you sir and I love watching you videos because you keep it simple and real.
@natalieleiter5677
@natalieleiter5677 Жыл бұрын
Hey Frank! have you made a video yet about about how you made the actual gauntlet?
@Bobisfunny3887
@Bobisfunny3887 Жыл бұрын
Mark 85 iron man helmet Walsh 3d video when is it coming out
@lsg1Entertainment
@lsg1Entertainment Жыл бұрын
How do you scale an adult helmet? Im about 22in round I think but I put that in and it changes everything
@tylerchrist14
@tylerchrist14 Жыл бұрын
Love all the content. Just set up my second printer and it dawned on me of the power consumption. How much do you spend on electricity for all your printing?
@Axlyoung1995
@Axlyoung1995 Жыл бұрын
Make the chest into a bust!! Then do a giveaway. Just putting a helmet and giving the whole thing a stand would work!
@TheCivilWarrior
@TheCivilWarrior Жыл бұрын
Once again you never fail to make an amazing and informative video I can't wait to see your next video. However I would like to see something like a winter soldier arm or maybe even a Starlord helmet since Gaurdians of the Galaxy volume 3 came out recently.
@midknight_maker
@midknight_maker Жыл бұрын
You should turn the old chest into a bust! Just print off a new helmet, and maybe a stand?
@FinnClarkFight
@FinnClarkFight Жыл бұрын
Frank, I noticed that a lot of pictures the back of the biceps on the mark 39 are white, and the front with the horizontal lines is gray. You can keep yours just how it is without fixing it, or you can fix it if you want. I will be fixing my mistake, I think if you look on your Starboost Hot Toys figure it shows the white on the back.
@FranklyBuilt
@FranklyBuilt Жыл бұрын
Huh. Look at that they are white. Weird never noticed. Nah I’m not fixing it. No one will ever notice or care haha 😆
@matthewgresser578
@matthewgresser578 Жыл бұрын
Hey brother...I truly enjoyed seeing your suit at c2e2. You should do exactly what you said with that chest piece. I cant wait to fix my printer... appreciate the vid.😃
@jacoballison951
@jacoballison951 Жыл бұрын
I for one would love to have that v1 chest on my wall in fact it would be an honor
@e.z-c1f
@e.z-c1f Жыл бұрын
Hell it would be a great giveaway ... I would love it with ur signature
@reprinted3D
@reprinted3D Жыл бұрын
I would love the old chest! I say do a giveaway.
@kawaiianimates9944
@kawaiianimates9944 Жыл бұрын
Um Mr.Builts, I’m trying to make my own iron man helmet and my main issue is that I’m trying to hide the sections that come together with wood filler. You see my printer is to small to print the helmet in one shot, so I printed them in pieces. After gluing the helmet together, I tried using would filler to hide the gaps. The issues is that I don’t know how much to sand away the wood filler and how much to apply. When I sand to much you can see the lines where the parts are connected and the filler primer can’t hide that. To little and you just get big glob of wood filler that has a lot of texture when primers is set over it. The wood filler I’m using is the Elmer’s durable wood fillers, the one Uncle Jessy used on his channel. Finally, does bondo have this similar issue, If not I might switch over. Help please 🥲
@rangnorippergaming
@rangnorippergaming Жыл бұрын
ILL TAKE IT LOL im printing one rn that would help alot
@hed420
@hed420 Жыл бұрын
For the version 1 chest piece you could print an extra head, shoulders, a stand, and make a life sized bust statute . You could use the cracked shoulder and back piece for the bust and print yourself new parts for your suit. Would make an awesome giveaway prize . Let me know if you do because I would like to enter.
@phillyblunt19132
@phillyblunt19132 Жыл бұрын
Raffle it off signed. I would love it
@cameronjohnson7130
@cameronjohnson7130 Жыл бұрын
Maybe a giveaway for the chest. I will eventually build my own armor so far I've printed just my helmet and made it magnetized
@Optikification
@Optikification Жыл бұрын
Love watching your vids ;-) I am watching my Neptune 3 Max getting closer and closer to me (post is still so slow)and cannot wait to print some cool costumes, Helmets and swords etc. Greetz from The Netherlands ;-) I was actually thinking how on earth do people attach straps and seeing this answered those questions. Thanks for that. Hard side is hooks ;-) Sign and auction the chest piece for charity.
@Queue22
@Queue22 Жыл бұрын
You should do the Mark 46 suit from civil war
@thermoshok
@thermoshok Жыл бұрын
i would definately like that old chest peice
@fiznits237
@fiznits237 Жыл бұрын
How do I clear coat metallic paint without ruining the color or making it more glossy then metallic? So basically clear coat it without changing color or anything at all.
@cheamanyo
@cheamanyo 6 ай бұрын
did you give that chest piece away? i could use it for my suit im doing as donor parts XD
@RodAndrews19
@RodAndrews19 Жыл бұрын
Yeah man sign that chest make a wall mount and give it away why not it would look great on any Franklybuilt fans wall
@MiguelAlmenaVisual
@MiguelAlmenaVisual Жыл бұрын
Frank! Love your project for my students! Do you have electronic recommendations as well? I want to order everything for memorial weekend special!
@maker_matt1023
@maker_matt1023 Жыл бұрын
The mk85 has come so far! Do you still plan on doing a video covering the Walsh3d helmet?
@jeffreynewsome5922
@jeffreynewsome5922 Жыл бұрын
Awesome Video! Can't wait for the new series. I would say people would definitely be interested in a giveaway for the old chest piece.
@BrunoAESilva
@BrunoAESilva 4 ай бұрын
Hi there, I'm thinking of starting to print one, but I'd like to try to motorize all the features I can. What do you say to using a raspberryPi? I wanted to put in voice control too and it seems to be the “simplest”, I'm a computer scientist so programming in python is very easy for me. PS: I love your videos and iron man suits
@Zekealot
@Zekealot Жыл бұрын
What is the QR code on the shoulder piece?
@FranklyBuilt
@FranklyBuilt Жыл бұрын
To my socials
@N01B4DA1
@N01B4DA1 Жыл бұрын
As you know that pla after a while it gets brittle and breaks easily. That's what's happening to your suit. To avoid any breaking in the future add a layer of epoxy and fiberglass netting on the inside of the suit which gives the suit strength. It will be a little heavier but it will protect your investment and time you put in. Make a piece and add the epoxy then try breaking it. It will be really hard to break. Also the parts that rub together scratching the paint I put on 3m clear laminate vinyl it is invisible. Cars get this put on in areas avoid chipping from rocks and debris from the roads.
@N01B4DA1
@N01B4DA1 Жыл бұрын
You brush the epoxy on to the fiberglass cloth and it dries very fast. Use cheap brushes they will be useless after using .
@zachmhuber
@zachmhuber Жыл бұрын
Hey man I’ll take the spare chest😅
@DVasilino
@DVasilino Жыл бұрын
do a giveaway for the chest piece. I would love to have it in my work shop.
@mixmaker2114
@mixmaker2114 9 ай бұрын
When is there a electronic update
@X-gaming282
@X-gaming282 Жыл бұрын
Every one who loves him 👇
@unwantedforstuff
@unwantedforstuff Жыл бұрын
I'm getting started on 3d printed cosplay and seeing your videos give me confidence and help me out a lot
@justingames3494
@justingames3494 Жыл бұрын
Frank! Can I buy the chest plate?
@Mrpotato2o2o
@Mrpotato2o2o 9 күн бұрын
3:22 look at the fingers of the suit
@FranklyBuilt
@FranklyBuilt 9 күн бұрын
Ghosts
@jordanbrooks4601
@jordanbrooks4601 Жыл бұрын
How much for my own
@alicialoyola8665
@alicialoyola8665 Жыл бұрын
This is super cool
@motzartzghost
@motzartzghost Жыл бұрын
The UK would appreciate the chest piece.
@eljoko2
@eljoko2 Жыл бұрын
Can you make a video about battle damaged mk 50 helmet ?
@noahhinton9727
@noahhinton9727 Жыл бұрын
Hey, so I want to start the amazing hobby of 3D printing but the thing that I don’t know how to do is transfer the print file to the printer. I am super new to this and have no idea what I’m doing😅
@marianomorales4883
@marianomorales4883 Жыл бұрын
Do the chest piece giveaway, please! I´m from Buenos Aires Aregntina and I want it! Impressive all your work, congratulations!
@hansherrera6969
@hansherrera6969 Жыл бұрын
i know you say sunlu but what pla, pla+ or petg thanks love ur videos
@PowerRangersNerd1
@PowerRangersNerd1 Жыл бұрын
A giveaway would be cool. I do have a question on paint I have a set of the old mighty morphing Power Ranger coins from 1993 that came with the chrome version of the flip heads, and I am having a hard time with painting them. I have watched video after video, but I got that chrome gold paint by wrist oleum and I have tried three different bases from white silver and metallic silver but as soon as I put that gold on, it is nothing like the cap of that paint bottle I would like the retro 1993 coin gold that came with the morpher but I have not been able to achieve that color yet so any help would be awesome
@gatorfromdecatur1870
@gatorfromdecatur1870 Жыл бұрын
How human of us! But you at least got around to it, I haven't even made a break down of my Heavy Moondalorian I promised after C2E2.....life happen but I am still working Heavy in the shadows
@3DRabbitHole
@3DRabbitHole Жыл бұрын
Hey Frank! Where are you buying the led eyes now a days. Can't find anywhere. Any links to help an old friend?
@FranklyBuilt
@FranklyBuilt Жыл бұрын
AliExpress
@3DRabbitHole
@3DRabbitHole Жыл бұрын
@@FranklyBuilt not available anymore 😢
@warstoriesofthe88th
@warstoriesofthe88th Жыл бұрын
Question to anyone that has experience. I've been printing props for a few years now. This is a finishing question. What is your go to clear coat or protective layer to prevent minor scratches or scrapes? Right now I just use a gloss or matte clear rustoleum enamel depending on the finish I want. Any suggestions welcome.
@FranklyBuilt
@FranklyBuilt Жыл бұрын
Duplicolor 1k clear
@warstoriesofthe88th
@warstoriesofthe88th Жыл бұрын
@Frankly Built thank you! Love your videos. You've given me some confidence to start making some things outside my comfort zone. Just finished a lantern with a battery powered flame light.
@joselionelethan6566
@joselionelethan6566 Жыл бұрын
Hey you should make a kamen Rider helmet
@RyanDeel-jq6db
@RyanDeel-jq6db Жыл бұрын
How much would it cost for you to build one for me
@mastalock
@mastalock Жыл бұрын
the debris stuck to the diffusing tape looks like bugs that got trapped in his bug zapper refocuser. Err I mean lightning refocuser.
@jordanbrooks4601
@jordanbrooks4601 Жыл бұрын
I need it
@RJcreations3D
@RJcreations3D Жыл бұрын
Who else watches Franks videos while removing supports? 😂
@ShenRonGames-SRG
@ShenRonGames-SRG Жыл бұрын
I would love a chance to win the old chest
@dominicsantaella1191
@dominicsantaella1191 Жыл бұрын
I'll take it
Mid States Live with Brian Nitcher
1:16:21
Mid States Collectors Club
Рет қаралды 120
Air Sigma Girl #sigma
0:32
Jin and Hattie
Рет қаралды 45 МЛН
UFC 287 : Перейра VS Адесанья 2
6:02
Setanta Sports UFC
Рет қаралды 486 М.
DEADPOOL SUIT MOVIE REPLICA SUIT Fitting Time Professional Cosplay
7:25
P&S Media And Entertainment
Рет қаралды 22 МЛН
How Much Does It Cost To Make An Iron Man Suit?
16:52
Frankly Built
Рет қаралды 504 М.
Adam Savage Incognito as Iron Man!
8:13
Adam Savage’s Tested
Рет қаралды 1,9 МЛН
I Electroplated a 3D Printed Iron Man Helmet and it's out of this World!
12:58
HEN3DRIK - Electroplating 3D Prints
Рет қаралды 677 М.
How to create stunning Props from 3D Prints by Electroplating them!
10:41
HEN3DRIK - Electroplating 3D Prints
Рет қаралды 131 М.
Fixing Heartbreaker & Wondercon Recap!
13:52
Emily The Engineer
Рет қаралды 42 М.
I Tried 3D PRINTING For The First Time!
15:37
Benny Productions
Рет қаралды 146 М.
Making REAL Fallout Power Armor (Part 1/6)
22:22
Hacksmith Industries
Рет қаралды 1,8 МЛН