My Dream Garage Full of Sh*t is DONE!

It's done! Kind of. My Dream Workshop is finally presentable! After being in this new house for 2 years it was surreal to break ground on this project. Did it end up costing more than I had planned? You bet! Was it worth it? Boy I sure hope so!
In this video I'll be covering the basic renovations that we're performed, from the electrical changes, to the insulation, HVAC, and eventually to the quality of life improvements and the layout of the new workspace!
3D Printer shelving, Resin printing wash n cure stations, mobile benches and racks, desks, toolboxes, paintbooth, lighting and more!
This entire space got such an amazing overhaul and I could have never imagined it turning out the way it did! Thank you everyone who helped and supported me! Enjoy the video!
▼ MENTIONED IN VIDEO
Amazon Cart | amzn.to/3QLGqIR
Kobalt Workbench | shorturl.at/DLNY0
Kobalt Cabinet | shorturl.at/DGP56
Nanoleafs | shorturl.at/uLOY0
Craftsman Toolbox| shorturl.at/oDTV1
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
ELEGOO| tinyurl.com/yvf6v6cm
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
0:00 - Intro
#3DPrinting #Workshop #maker

[@freelectron2029]

thats not a workshop. thats a garage thats full of shit

[@FranklyBuilt]

Please elaborate on what your definition of workshop is? My understanding was a place or “Shop” where I’m able to do the “work” I need to in order to make things. But you seem to know more 🧐

[@creatorkarl5968]

That's not a comment, that's jealousy masked by hate.

[@IsThereAnEkkoInHere]

That's not delivery, that's digiorno

[@Banished_Builds]

Imagine saying this when his 3D printers alone get more done in a year then you do ☠️

[@sidneyprints4846]

You need a hug ? Sounds like you don't get enough love

[@kylejobs-yr1df]

Being disorganized is the biggest time waster. You never know where anything is. One of the cleanest and nicest setups ive seen. Congrats

[@williamk52]

You should print a mount for your camera to attach to the peg board

[@loganpotter7812]

Frank (the goat)- you won't be able to replicate this workshop exactly. My mind- challenge accepted

[@ChrisBoshProps]

Incredible set up Frank! Thanks for sharing man. You have your dream workshop that looks like its going to make more dreams come true. Absolutely amazing man.

[@JZM006]

good video but just so you know, resin doesn't really expire. those expiration dates are more or less pointless, you can use resins that are 10+ years old no problem. just make sure you give it a *good* shake before you use it to make sure it's mixed properly

[@mathewisaacs88]

You could always print labels and put them on some magnetic strips. Be easy to rearrange, and that way, you won't procrastinate and forever be stuck with the tape 😂

[@KickBass3d]

Keep up the good work frank!

[@KickBass3d]

:3

[@user-gh6qx9nf9i]

This video was completely awesome, I love these kind of videos, thank you so much, I’ve been following your channel for a while and I think this video really boosted up this channel

[@kittysweelssen1003]

because you don't need to watch youtube live :) it's not a chat. Nice layout downstairs in your garage Frank, the printbooth looks familiar, you've shown that before but White Cars? dirt is way to visible on those :)

[@vummee-tech]

Awesome! Such a cool workshop! Can't wait for new videos from this new workshop.

[@STRAWHATSITDOWN]

Man such a great workshop and video Frank! Keep up the amazing work bro!!!!

[@Squires_cosplay]

This set up is beautiful!!!

[@RealStarkIndustries]

Thanks for sharing and for all the videos.

[@cesarsilva3531]

Love the workshop. It's a big inspiration to get my workspace finished.

[@g.s.3389]

amazing workshop !!! well done!

[@Hanzi2u]

Im really impressed frank!! Looks so good!!!

[@AuntJemimaGames]

Love those Harbor Freight magnetic bars, I've got a few on my bench and it's nice to be able to easily stow/pull your tools but you're not a fan of stuff like pegboard

[@Deltazor]

I just received my first printer Qidi X Max 3! I'm so excited. Thanks for your videos, they are a big encouragement. Now time to watch your set up!

[@dr.chillmoosh6552]

Looks 🔥🔥🔥

[@Ducky-121]

You have really inspired me thank you

[@rock10ginger73]

Currently saving to buy my first home and this type of video is such an inspiration for me when I finally get my own place and can make a workshop!

[@filmunleashed]

That's awesome man!

[@zacattack5783]

you have a really slick workshop setup frank. Enjoyed this video!

[@dennislink1300]

Awesome video and great space. Make sure to follow-up with the final HVAC air cleaner parts. Cause the carbon filters can take the resin smell out of your work area but they don't do much to remove the harmful VOCs in the air.

[@John_Wick69]

Love the setup 👌

[@Jayy8Bit]

Nice! I'm on the workshop journey as well. My walls just went into my new building, finished painting last night. Next step is flooring, cabinets, and shelves! I'm hoping it is finished within the month!

[@RedSlashAce]

Great job 🙂

[@firstpitstop]

Nice set up! I would like to see a video on that 3in1 printer/laser/cnc engraver you have there if posible. Thanks

[@exelonlineandco928]

I need this so bad, I'm in awe 🤩. Congrats bro , hard work pays off 👏

[@aussielover1407]

just next level setup

[@diamondgigabite9065]

Congratulations Frank! I convinced my engineering teacher to let me build a iron man helmet as a project!

[@i3creations]

Well done sir! I'm using the 3rd bay of my garage as my maker-space (well... 1 of my maker-spaces!) 😂

[@MrRadicalsheep]

Dam nice set up!

[@muhammadamaar7936]

amazing!!!

[@YakovK09]

Amazing videos as always frank!

[@JacobHGamez]

Awesome!!!

[@donz.2201]

Congratulations on your workshop. looks awesome! as for your air compressor noise - I put my compressor outside in its own little insulated, shed-like box. The shop has more room and it is quieter. until I fire up the angle grinder.

[@lightfoot7158]

Nice set up Frank

[@mj3432]

Amazing

[@diy_wizard]

Wow Really looks good! Wish I had that much space ^^

[@lucayau6282]

This workshop is very cool

[@Skoopa92]

Look so good and functional, usually those two things don't work in tandem

[@wvafob]

I would have a whole home surge suppressor installed in the panel for that extra layer of protection with all of those printers. Amazing set up, hoping to get my second printer soon.

[@meridacavediver]

Nice job. You’re good at what you do. I certainly don’t have the patience to do it but I do like to look. For me it’s the post work lol. Great space.

[@RideGG]

Your shop is awesome! You could replace that "treacherous " ladder with those insulated attic ladders at lowes or home depot, they fold up into your ceiling.

[@MakoAtamo]

loving the setup! and seems like everyone is going to NC nowadays but so cool knowing you were a jet troop. Im in joint base charleston crew chief.

[@TheCivilWarrior]

Hey Frank thank for showing us the workshop gave me a lot of ideas for my future workshop.However now that I'm thinking about it you have a lot of demon slayer swords but you don't have Hawkeyes ronin sword so that would be cool.

[@RRMCustomCreations]

Love how he's a low-key car guy the injen sticker in the tool box the inter cooler and bumper reinforcement right inside the garage door glad to see its not just me who has a love for more than just 1 thing

[@dwaynem8015]

Nicely done 👍

[@royaldanfield]

this is so cool to look at. just watched your first video a few moments ago. Got myself my first printer this month and I´m already knee-deep in the 3D-Printing-Rabbithole and I LOVE it :D

[@SensationalSpidey]

setup is beautiful, I suggest getting an air purifier for the printer room if there already isn't one to help with the VOCs

[@xansdrewrblx5535]

Was here at 75k and the vids just keep getting better 😁

[@GSullySwimmer2024]

Loving the new intro!!!

[@sporadicamnesic]

With the scrap filament/removed print supports etc, you can use a solvent in a jar and put those pieces in to make a plastic paste for filling etc. Pretty sure Punished Props did it and talk about it in one of their videos

[@WatchBenGo]

The workshop looks awesome! Where do you do your sanding and what do you do to control the dust?

[@peterclegg2609]

Great video, I love 3d printing but also like a nice rack 😂

[@glitched-plays]

absolutely insane, it's looking good, also I have a helmet request, if you haven't already do you thing you could make Deathstroke's iconic helmet, he is one of my favorite dc characters design wise. pls...

[@austinperry545]

Bro the hexagonal lighting and fixtures… I’m a sucker for hexagons

[@f1fan853]

Can you do a video on what filaments you recommend?

[@Optikification]

Looks awesome, all i have is a spare bedroom ;-)

[@me_not_you7052]

Please do dino thunder white helmet

[@danielcoombes3310]

Wow dude you must be so proud!!! I know I would be. It look awesome man. So do you do all of this as your proper job or do you do something else too? I only ask because I'd love this stuff to develop into being a full time job for me too and if I know you managed to buy your house and do all this from printing/ painting etc it would be very inspiring to me

[@cowabungacreation]

Love love love the video! I am tackling the same project for my print farm in my garage right now. What tabletop leg solution would you have for a gigantic format printer (I'm receiving a 5 toolhead Prusa XL in about a week)

[@AussieStarWarsNerd]

The workshop looks awesome! Just bought my first 3D printer a month ago and am working on a full armour set for a Clone Trooper. Just going for something massive straight away. Have you got any advice for doing something like this?

[@dakonx7049]

20:10 best moment of the whole vid

[@rodrigocaramello2348]

Would be great to have a Jarvis arm at this roof

[@DavidLeeKersey]

Would love a link to that repair kit or something similar.

[@michaelalanstlouis]

Nice workshop! I wish I could do something like this. Unfortunately living in expen$ive CA means my printer is in my spare room!

[@DanBlomberg]

This is great! Well done... although I get sad whenever I lose garages to hobbies :-D (which is always)

[@stevekauffman7555]

That looks great. Do you happen to have a link to the shelving legs you got from Amazon for that butcher block shelf?

[@rowenarrow]

Damn that jab at the AnkerMake M5 though. I feel attacked, lol.

[@Nomadx83]

I think we all agree that we need to see this wall printer work 😂

[@buckaroosan5571]

Just go ahead and print your labels and hold them on with magnets. ;)

[@FranklyBuilt]

Smart!

[@SeenAndCheese]

My college had a Lulzbot 5 and I got exceptionally good with it (2019ish). They asked me to write the bible on it for future students! Now I am trying to get into it for myself but have home restrictions (toddlers, Border Collies, no garage, and live in Northeast). Looking to get a K1 Max or Neptune 3 Max or P1S or CR-M4 so I can print helmets. Any suggestions on making a corner of a well trafficked room into a small shop?

[@SpectraV3i]

Do you have a link for that little tool box?

[@user-mf4gm7rt2g]

Bro that is so sick your awesome I hope I can be like you one day

[@emirojr9817]

Nice genesis at 1:25. I have a 2015 3.8 with the same fog light delete.

[@FranklyBuilt]

Thanks. It doesn’t have a fog light delete. The 2.0s didn’t have fogs

[@Chriss_Workshop]

Still so jelly about your setup man. With the amount of printing you do, have you thought about getting a shredder? They're expensive at about a grand but considering the scale of your production it may be worth considering

[@xxxDomeshockxx]

Next change out garage door for a roll up then fir out for more shelving space. 🤔

[@3DandTeePrinting]

Those dog matts work great. Way cheaper then the wham bam matts.

[@DatFunnyPerson]

17:36 it's a very common mistake to think that the little charcoal filter inside those resin printers acctualy filter the air. They don't! They just filter out smells. Not fumes

[@Gorocco]

Im pretty new to the 3d printing world. Do you share your printer settings for some of your machines? If not where is a good spot to look?

[@astrophysicistguy]

An organized shop makes all the difference in the world. Of course I don’t know why someone needs 25 printers but then again people ask me why I have 25 rod/reel outfits in my bass boat 🎣. I just tell them it’s to keep the 4 different sonar units company … 😳

[@MrMndon]

Really nice setup, how long did you work on the plan for it?

[@FranklyBuilt]

Uhhhhh I didn’t haha I just built it haha

[@MrMndon]

@@FranklyBuilt Yep, it happens that way too.

[@fastgrimjay3092]

Why is no one else watching? Edit: I only commented because when I clicked on the video, I was the only one watching

[@fastgrimjay3092]

There we go

[@23rdreaper]

idk

[@cooperweller5472]

I am

[@ConnersWorld]

What about a UPS? I bought an APC 1500va just for my Neptune 3 Max after the last power outage killed my print.

[@FranklyBuilt]

I would need a lot of them haha

[@ConnersWorld]

@@FranklyBuilt No kidding! Love the setup!

[@HPijl666]

Nice setup and place. But i would sell all the printers and use 1 type or brand to make it universal. You always got the same quality.

[@Thegamingwanderer201]

I’ve been trying to 3d print stormbreaker but I can’t figure out the right settings for the size

[@GSullySwimmer2024]

Why not make your own filament factory? 13:39 probably would just need a hot end with a 1.75 nozzle, a tub, or a chamber to melt down the failed/supports and then a way to reel the brand new filament on to a empty spool.🤔🤔🤔 Edit: just looked it up its called pultrusion!!

[@Tony-pch]

Two questions What type of filament do you use because I found a great pla 1.75 1kg for about $15-17 and wondered what you use Also do you think the SV03 would fit on the shelves that you have your printers on

[@johan23501]

Looks really awesome!! :) Isn't a bit dangerous to store those spray paints in a place which can very hot? As far as I know it's not recommended and maybe even dangerous. Please correct me if I am wrong. :)

[@FranklyBuilt]

It needs to get over 150+ degrees. Normal 90-100 degrees is fine

[@sloshedmrbones]

I have been printing for a month now and you have inspired me to print a iron man suit since you first showed it. It is ike a childhood dream to have a suit like Tony Stark. I have been watching your videos and learning all I can. I have a couple questions and I hope you can answer them. First where can I get the stl for the full iron man suit that is a quality file? Second can I size the iron man helmet the same way i would any other helmet using a caliper? Lastly securing armor cosplay pieces to you, what is used as far as velcro, printed clips, hot glue and other things?

[@slickpuller8801]

YYYIOOOOOO NICCEEEE❤❤🎉🎉🎉

[@woodsman9427]

can you do a video on a ender 3 vs 2 with a glass bed?

[@FranklyBuilt]

No I’m sorry. That printer is kinda old and dated at this point.

[@87livinglegend]

Yo I'm in North Carolina as well

[@critter42]

"Don't judge me" - I look over at half-completed work area - don't worry, I'm not 😀

[@user-mf4gm7rt2g]

Bro I wish I could be like you I am trying to save up for a bamboo lab printer i don’t think I will be able to get it but there is no shame in trying but you are soooooooooo cool thank so much for the inspiration

[@GSullySwimmer2024]

Another question do you think you will ever go full hack smith or Colin furze with a compound/bunker?

[@xxlions101xx4]

how do the wall conveyor belt prints not break when done printing?

[@FranklyBuilt]

Why would they break?