I 3D Printed A GIANT Fidget Toy! 1000% Flexi-Rexi!

[@Mobile_Dom]

this is the mostr ADHD fever-dream video you've ever posted and I am here fro it

[@creeperking1234]

I have ADHD and I agree

[@lacertaKH]

Frank I appreciate you getting me into 3d printing but I think you've hit mad scientist level.

[@kennybulow3183]

this

[@masonl87]

This is the craziest most out-of-hand spite-fueled barely coherent insanity you've done. I LOVE IT!

[@brianwaterman8185]

dude that's freakin awesome. Not sure what i like most about this, your excitement, your lack of gaf on how someone else would do it or the actual print. either way absolutely ridiculous. Can't wait to see what you do next.

[@FranklyBuilt]

Well thank you!!

[@Arkmanb]

I love that when I’m feeling tired or down I can watch Frank and it gives real motivation and I laugh bc of how funny he is in every video

[@scottthomas7103]

the laughter when it is completed and standing is awesome!! That thing is awesome

[@RegularOldDan]

This brings a smile to my face; I'm remembering when Joel used to max out the G-max with various prints, back a few years ago. Good, silly fun. 😁

[@SuperYanhan]

Frank video always cheer up my day...thanks man❤

[@BioshadowX]

That mew is sooooo cute!

[@michaelparadise9293]

Me and my son loved this video. Now he wants to use the neptune max to make one. Thanks for this 😅

[@BurgerSoda]

0:05 yes. I printed 50 rocktopuses and gave them out. Now everybody at my junior high school knows me. I’m scared.

[@coolguyfast10]

lol i did that in 5th grade long time ago and everyone knew me

[@darc0615]

Lmfao laughed through the whole thing 🤣 this is great

[@dekopuma]

I love the general sense of mania present throughout this video.

[@mirman1]

Can’t wait to see what you can do with the orangestorm giga!

[@mejgiey]

This is great! I love the little humor bits you put into it. And the laugh at the very end 😂

[@drkknight001]

Damn, I am here for 3d printing fever dreams and tangents. First the 2099 helmets, now the Rexies. Am I guessing Pokemon next?

[@GumbiiGrows]

elegoo, please send this man a OrangeStorm Giga and a crate of filament...

[@chrismestre1601]

would be cool to see a max size mjolnir! loved the vid!

[@MakerBees333]

😂 the intro was too real! ❤

[@Blitz-Gaming]

nice job frank

[@AndTecks]

wtf frank. your channel growth is insane. I am happy for you.

[@JustGee3D]

I need to see you print the Rexi on the Elegoo OrangeStorm Giga 🤣🤣

[@-AT-WALKER]

You, Sir, are a mad lad.

[@SevenInSoft]

Hey frank are you going to make the hellbat helmet the yosh studios made?,cause it looks 😯🔥

[@cahms26]

You sir have lost your mind. In the best way possible 😂

[@PrismaticPhilo]

This is really fun to watch! Thanks for taking us on this journey😂

[@mac2cool93]

🤣 I can't with you but I'm here for the goofy content glad you're having fun lol

[@radish6691]

Frankly Built? Nah, in this video it’s Frank’s sleep-deprived twin Crankily Built. 🙃

[@gehrkea]

Frank I owe you so much, went from total noob to printing full armor sets so this feels like sacrilege to say: this is more Blippi than Frank and my head is reeling. If this is what the algorithm needs I get it man just want you to win.

[@hegga_nm]

I can't wait to see you print Flexi-Rexi on Giga! You will probably have to make another shed just to store it! 🤣

[@hopesanddreams_fpv]

If all youtube videos were like this I'd never stop watching.

[@FranklyBuilt]

Good to know haha

[@larryu3727]

I love the humor in the video. Keep up the great work.

[@FenrisOswin]

Absolutely insane! Love it, was chuckling all the way through :)

[@Gozrok]

Been waiting for this video since I saw you mention you were going to do it. It absolutely did not disappoint and was a fun watch, thank you.

[@byteatatime]

I love how you teach us how to do it like we're all going to print a 1200% flexi-rexi

[@hmmchikid3422]

Of course it glows in the dark. 🔥🔥🔥🦖🦖🦖

[@TheWoodworkingVigilante]

That is killer! Love this! Can’t wait to see it on the Giga!

[@zeldrya]

I look forward to you making it bigger! Hahaha 😂

[@ccm1092]

That is amazing.

[@StumblingBumblingIdiot]

LOL fun video. I bet the flexi octopus could be scaled up to HUGE sizes :) You could have your own kaiju battles!

[@Shreks_main]

Make a human sized Lego man

[@bvvillz1]

I wonder how the designer of Flexi-Rexi feels about this, I don't think he intended for this level of inanity to be possible.

[@johno7370]

You know Frank loves his followers when he forgets to screen record and goes back and re-do just to get the shot lol This is a video I didn't know I needed in my life!!!

[@rossrichert2022]

Loved it

[@MakerBees333]

@Polymaker sponsor this guy with some CosPLA ❤! His work is inspiring 👍

[@rhythmrainbow]

Your content on this channel has informed & entertained me like no other. 😊😊

[@Deviled_EG]

Flexy rexy roar

[@DuckyDaKing]

flexy rexy bite

[@AntoinetteMPetty]

I LOVE IT. SO AMAZING 👏🏿 💐🔥👍🏾

[@danielblackwell5577]

I would love a video on trouble shooting issues with printers, filament, settings, etc. with some of the modern printers like the Elegoo Neptune 3's and Sunlu PLA+ and Cura

[@fireactivefoxy6835]

Oh my god it looks soo damn cool, great work on getting it together, keep it up and by the way how is the blue beetle sword

[@TheButchersbLock]

Awesome Flexi rexi mate, I reckon a giant articulated octopus would be awesome. Someone has done the hard work for you and split the legs for single nozzle multi colour printing. 👍🇦🇺😊

[@Saltmancer]

Perfect Christmas present

[@tylermontgomery5647]

It’s awesome to see your channel go over the 1 million sub mark! Here to hoping the growth continues, really enjoy your content and personality that shines through!

[@amberthetrans]

7:44 “if you *really* wanna see the timelapse, here you go (coffee ad starts playing)

[@williamblaes6784]

You should try one of the T-Rex Skull models. I maxed out one on my CR10 for a friend for Christmas and, my god, it is the most satisfying thing I've ever 3D printed.

[@baushey5708]

Frank, you know we all love you and your 3d prints, but at this rate you are going to take over the United States with your army of flexy dinosaurs. So do not stop

[@jsjakobsen]

Mad scientist level achieved! 😅

[@Beakerzor]

5:15 you can just select-all and then click on "arrange" and it will make as many plates as needed and put all the parts on all the plates automagically, I LOVE ORCA SLICER!

[@SRRIPI]

love it

[@---ey6hj]

There is a remix of this print where the pieces are already apart, all that is needed is glue to assemble . Might be a little easier next time you make on!

[@melvinmartinez5144]

Dude, that’s freakin awesome! You’re right about being a goof every now and then! AWESOME 1

[@TheBottegaChannel]

Dude, you made Flex- Zilla. I love it!

[@AdamMclardy]

I LOVE the snark in this!!!

[@chaux13]

Awesome Video Frank and by any chance do you have a tutorial of how to connect Orca Slicer on the K1 Max?? my first printer was the Bambu X1C and I'll Love i the K1 works like that one.

[@youbuyverylucky2493]

imagine robbing frank's house and then seeing a 4 foot flexy rexy

[@GeneralDiggler1]

Are you going to print the Santa hat clip on for the giant Flexi-Rexi?

[@alexandreapereira414]

Do you have a video planned for that mew? Or link to the file for it?

[@mike_k.]

Scaling parts so one part fits the bed? Im curious how big Iron man's armor you would be able to print. Just not sure how much is the chest plate limiting. But hey the Orangestorm giga might fix that issue 😆. That would be ultimate flex for your channel.

[@danielchiu741]

Another awesome build! Can't wait to see the dragon 🐉

[@valtsyplenkov4401]

Thanks!

[@FranklyBuilt]

Wow!! Thank you so much!

[@COPS4BLOPS]

Frank is the hero we dont deserve this is why

[@batdude4339]

You uh, you doing alright there mate?

[@lucayau6282]

Haha i print one too but not that big 😂

[@LisaWagner-t7k]

That is amazing!!

[@Tomro82]

I freaking love itttt!!!!!

[@tempest4143]

Lol, that's fantastic!

[@zra8148]

Awesome

[@larryracer8723]

You should make a full tutorial on how to use a resin printer. The tutorials out rn on other channels kinda suck

[@Zoidd_Bergg]

It's all fun and games until giant flexi rexi becomes sentient and devoures your whole family.

[@marcom1600]

No matter what video you update it is always amazing to watch bro! Also seeing you enjoying it so much make me feel like ok, I will do that too😂😂😂 Keep it up and thank you 👍

[@Queue22]

i thought u went crazy with all the ones on the table. i didnt see the ones on the suits...

[@PrintedByJohn]

I think that you are defentely getting out of hand keep making so many things.

[@brandonkitchens92]

So I said a few videos ago that I got the neptune 4 max as my first printer. 😂 it's doing good so far with 6 Christmas tree stand legs and a set of cookie cutters for my fiance. They did fairly well and my next project will be a 50 inch predator spear cut into 3 parts. Have been maintaining the tightness of my screws and wheels. Everything is still running good. I plan on updating the firmware of everything soon.

[@396strokerz28camaro]

Next big one you should find the individual link stl set. Just need to print the dowels and a little glue and it's good to go.

[@slickrickowens5429]

Now it’s time to make a print in place flexi rexi on the elegoo orangestorm giga!

[@arnaumarimon9847]

Hi Frank, hello from Spain, i was thinking in buying my first 3d printer, and i saw the neptune 4 plus which is similar to the max but not as huge, do u recommend it?

[@KiwibearBuilds]

Oh yeah? I could print a flexi rexy smaller than that any day! 😂

[@pułkownikkaczodziobyzpodlasia]

Frank, you have been posting a ton, is this a Christmas present for us?

[@reprinted3D]

Frank, I love you to death, but if you're going to do the snap thing, you really need to wear the Iron Man Infinity Gauntlet; I mean, it kinda is your brand!🤣🤣🤣 Fun video. It's always great when you let your sense of humor and playfulness shine through!

[@corocsat8469]

Soooo... when you getting an orangestorm and doing flexi rexie v2 😂 god dam he a big boy

[@weathernado]

7:48 and at that moment a Kroger ad played for me

[@pophunter1645]

How much filament did you use in total?

[@PrintedByJohn]

Make a huge flexy shark.

[@Bla_noir]

Next video : I 3D Printed the Effiel Tower into 1 million peices and put it together 😃

[@tysk5729]

Its time for an intervention

[@yellohammer8571]

There's that one 3D printed puzzle or thing that looks like a toaster, that when opened, shows some gears inside. I'd like to see you print THAT, whatever it's called.

[@SirLegoJr]

ik this was like a year ago. (i watch this like every other month for some reason) but if you still got the orangestorm giga, you should do a project with the flexi rexi like this where you cut down like the head and print it as big as possible then the body. it would be massive ( not like you will see this 1 YEAR later though lol) (EDIT) i just realized he mentioned it 😬

[@WaterboyFN]

I was about to comment this exactly😂

[@not-Ryder450]

Yooooo you did it

[@rexemondaforever2283]

I used Lightning infill to save filament, so my PLA+ shell is plenty strong

[@jayc5942]

Time to switch to decaf 😂