【Free pattern】Super Sentai Base Helmet EVA Foam DIY

[@enclavecomms.officer5219]

you are a god amongst men, this pattern has saved me so much foam waste through trial and error to make a blank helmet.

[@RoxerBoxer123]

これはとても役に立ちましたありがとうございます！間違いなくビデオが好きです！

[@assassinx6325]

Man your channel is so underrated. You go in to a lot of detail I like that .

[@OGchannel]

ベースマスク使わせていただきます！ 素人なのですごく助かります！

[@courtnrysalamone7677]

This definately helped me out 😃 it can be used as a base helmet for alot of things and honestly it helped bring my blackwatch commander from prototype 2 come to life lol

[@Casious_Productions]

How do you measure where the eyes should be??

[@courtnrysalamone7677]

@@Casious_Productions i usually guess, it really depends on what youre using it for. You can always srsw guidelines on it like you would a face on paper (i dont remember the measurements) or figure out the height and measure from the center out

[@島々-f6b]

わー、ありがとございます😊

[@candy_c0rn_cat201]

This is soooooo helpful because I want to make my own pattern also it’s nice to just have a one of these for costume making

[@distrablue1411]

Thank you SO MUCH for the template, this is incredible !!

[@GodsPrettiestPrincess]

Absolute legend. Needed a helmet in this exact shape for a cosplay.

[@イノマ-d4q]

コスプレというものを知り、一番好きな仮面ライダーの頭部をどうにかしようとして辿り着きました。カッコよすぎます!🎉

[@harunhamid2324]

U GIVE TEMPLATE FOR FREE?? OMG..GOD BLESS YOU BRO..

[@yaaaaaaaah]

If there is one person who deserves a statue... it would be the one that gives all patterns for free

[@yaaaaaaaah]

@@kashcamdyn4995 Dude-

[@simonrodriguezmena5215]

What size the impression must be?

[@yourboicris3109]

A printers not free…

[@hinono_2325]

とても参考になりました！ありがとうございます！

[@ciemyme9465]

素晴らしいです！！参考にさせていただきます❤

[@UnCosRangerColombiano]

this is a real superhero, thank you good man thank you

[@PigtailChannel]

Thank you for watching my video.

[@MrSkaizZ]

Thank you so much for the pattern, your whole channel is incredible !

[@Musashiden]

Dude Ive been looking for something like this to start building my LED DJ helmet. Really appreciate you for this.

[@PigtailChannel]

Thank you for watching my video.

[@LadyPhantomhivexx]

This is amazing!! I’m making a helmet for Iron Mask/Alphen from Tales of Arise and I was agonising over how to pattern it, this is perfect! Thank you 😭💕✨

[@laforjaqro]

Thank you for your time and for the template! Great work!

[@kristoffdemesa2968]

Thx so much! I’m trying to make a dip helmet for cosplay day at my school!

[@uzuwuzi4481]

Thank you for the free template, now you've earned a new subscriber

[@Cornstarch999]

Nicely done can’t wait for the next video 👍🏻🙌🏻

[@PigtailChannel]

Thank you for watching my video.

[@a_little_Vi11ain0us]

Hey! It's a great tutorial! And thank you for the free template! I'm just curious, i out together a cardboard mockup to check sizes and two of the stripes didnt align correctly. To be precise, on the template it was the two middle stripes of the front half, one was always longer than the other. Will that be different with foam?

[@PigtailChannel]

The template I made is handmade and not very accurate. sorry.

[@mcgamemaster]

question which feels better to use for a helmet foam or cardboard? I'm just wondering cause cardboard is cheaper to get but if it doesn't feel that great I'd rather do foam?

[@PigtailChannel]

The base helmet I created is based on the use of EVA foam. If you want to make a base helmet from paper, please watch this video. kzbin.info/www/bejne/fHm6Z5hjiseSo6s

[@LennardCruce]

Ahhh this makes me miss the days when all i did at home is make eva foam helmets.

[@PigtailChannel]

Thank you for watching my video.

[@secretblue0290]

You used to do that way back then?

[@futefigh]

Si intento pasar la plantilla usando una hoja en la pantalla, que zoom me recomiendan usar

[@xstranho]

Hello, please, how do I resize the template to my head measurements? That is, let's suppose that your template has a head measurement of 53 cm, and my head is 56 cm, how do I print it to my exact measurement? Can you help me with this issue?

[@PigtailChannel]

Please refer to this video. kzbin.info/www/bejne/e3-qZppricp6ftE

[@quinnfarrell949]

How would you put it on, I have the prices done I just need to know a good way to put it on and able to take it off

[@PigtailChannel]

How to wear a base helmet depends on the character. You can put a slit on the side of the helmet to put a magnet in it, or put a slit in the back of the head and attach a zipper. Watch the video on how to make a helmet for my character.

[@dollycombiscoito3884]

Thanks friend, I'm going to use this base mold for the Cyberpunk 2077 Trauma Team Helmet (by the way, could you teach me how to make this helmet?)

[@Casious_Productions]

One thing troubles me though...how do you know where to cut the eyes??? I mean..you can see what your doing with the thing on your head..and everyones eyes are placed somewhat differently..so how do you do that..measure where the eyes should be..will take a lot of helemet before you get it perfect..if you're not lucky and get it right the first or second time ??

[@PigtailChannel]

The design of Super Sentai is not a problem because the eyes are wide-ranging. If you want to mark your eye position on the base helmet, mark it from the outside while wearing the base helmet.

[@TheCOMICCOMMANDER]

Awesome. The paper template fit together (although a bit crumpled LOL) so now its time for the foam!! Thank you.

[@Casious_Productions]

How do you measure where the eyes should be??

[@johnvonmartin7501]

Japanese craftsmanship at its finest

[@siloahgrace3189]

Tried the Letter pattern, but is seems that the upper top head is longer than the other half. And all of the ends are not the same length. An I doing it wrong? 😢

[@PigtailChannel]

The pattern paper I made has some parts that are out of place because it is handmade. It seems that there is also a gap depending on the printer when printing out. So, please correct the printed pattern by hand. It shouldn't be a big problem.

[@まお先生]

コメント失礼します！！！ 参考にします⭐️ ちなみに！ 同じハサミ使ってます！！！

[@alwaysrcrafter3066]

Thank you! I will use this for kabuto! Can I use 6mm foam instead of 10mm? The sunken details of the helmet might be too deep if I use 10mm.

[@PigtailChannel]

Using 6mm foam instead of 10mm gives the base helmet an angular shape. We recommend using 10mm thickness if possible.

[@CarnagePatrol]

What size head is this supposed to fit ? I want to know so I can scale it up or down to suit.

[@PigtailChannel]

Please see the video below for resizing. kzbin.info/www/bejne/e3-qZppricp6ftE

[@mrocob83]

Amazing work! I would love to see you make a zyuranger blue triceratops helmet

[@PigtailChannel]

Thank you for watching my video.　I am making a new Super Sentai helmet now.

[@dendyachmad4243]

Very cool bro ! Thanks for the free template. It something big too us who cant make good helmet 🙏🙏 bless you

[@PigtailChannel]

Thank you for watching my video.

[@blade6363]

Nice template. great video. Thank you!!

[@shan9usfc]

Thank you Terran for providing us with your holy pict feed and your sacred Standard Template Construct. I will now reproduce this so that I'll be one with the Machine God.

[@marcha-nnel1009]

Wow this Help me so much...Thank you🎉🎉

[@ricardoparreira474]

Olá! Boa noite ! Essas plantilhas me servirão também para o helmet do Nashounaro Kiddo original 1960

[@ShorahArt]

I'm attempting to use this as the base for a Kamen Rider Geats helmet but I cant figure out how to get his headshape to work. Any advice? thank you for all the patterns and videos!!

[@PigtailChannel]

I'm currently working on a Kamen Rider Geats helmet. Please wait until the video is released.

[@イチナオチャンネル]

似たようなマットでハサミを使って切ったのですが、断面が綺麗に出来なかったせいか、ボンドでくっつけようとしてもうまくくっつかないうえに、ボードを丸くすることも困難でした。 やはりハサミよりもカッターの方がいいのでしょうか？ あとうまく丸くする解決方法はありませんでしょうか？ 長文失礼しました。

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。マットを切断する際はよく切れるカッターを使わないと切断面が荒れてしまいます。曲面にしたい場合はヒートガンで熱を加えて曲げる方法があります。ギャクヨガ様のサイトや動画が詳しいので参考にされると良いと思います。 www.gyakuyoga.com/

[@イチナオチャンネル]

Pigtail Channel なるほど、ありがとうございます！

[@napmeap1724]

Can you please put the same template you use in the video in the description because I don’t have thick paper and it’s hard to cut the right way

[@PigtailChannel]

It doesn't have to be graph paper, but any cardboard can be used. A cereal box is also acceptable.

[@Casious_Productions]

Why doesn't anyone ever put their creation on..so we can see what it looks like on..or even if the size is correct...why?????

[@滝羽]

質問です。 同じ100均のマットを使って製作していますが、顎部品を本体マスクに接着するときに裏側の凹凸が相性が悪いのか全然くっつきません。 動画でしっかりくっついているのはなにかコツがあったりしますでしょうか？

[@jurassicpictures7299]

こんにちは、その問題を解決できたかどうかわかりません。申し訳ありませんが、ヘルメットを衣装に使用することを考えているので、使用できるかどうか知りたいです。ご清聴ありがとうございます。

[@PigtailChannel]

Gボンドを薄く塗ってしっかり乾かし、もう一度塗ってしっかり乾かしをアゴの部品とマスクのアゴの部分両方に行うとしっかり接着できます。２度塗りしなかったり、乾燥が甘かったり、片側しか接着剤を塗っていなかったりするとうまく接着できません。

[@PigtailChannel]

@@jurassicpictures7299 　こちらのヘルメットは商用利用しなければ自由に使って大丈夫です。衣装に使って頂いても問題ないです。

[@PowerSource301]

Thank you so much for this tutorial video

[@user-loveriosesuro]

動画拝見させていただきました。 質問なんですが、 型紙にある等間隔に置かれたちょぼはどういった役割なんでしょうか。 衣装として着用する際は、開いたりせずに完成したものをそのままかぶれるのでしょうか。

[@PigtailChannel]

型紙の等間隔のマークは部品同士を貼り合わせる際のガイドになります。マーク同士を合わせることで曲面が成形されます。マークを無視して貼り合わせるとマスクは完成しません。被るときはスリットを入れる必要があります。どの部分に入れるかはキャラクターによって変わりますので各動画を参考にしてください。

[@michaelliu271]

Thank you for being so generous!

[@aaronmoura1234]

Perfect just what i needed for my hanami mask

[@PemakanUranium]

Do i have to use 10mm foam for this?

[@PigtailChannel]

That's right. If you use EVA foam that is thinner than 10mm, the helmet will look angular.

[@danamarvelstar]

So what did you do differently compared to the conventional helmet?

[@PigtailChannel]

The difference from traditional helmets is that the width is narrower. Characters with round heads, such as Kamen Rider from the Showa era, use traditional helmets.

[@cruz3510]

Could i use card bord instead

[@mellowyello1478]

I have a lot more access to cardboard than i do foam, can anyone confirm if this works with cardboard as well? I found a template similar to the bigger/wider one (on the left at the end of this video) and as much as I like it, I'm always looking for upgrades.

[@Casious_Productions]

How do you measure where the eyes should be??

[@markvo250]

how do you know when to stop sanding the chin and what is that sanding machine

[@markvo250]

and also what grit?

[@PigtailChannel]

The sanding machine I use is a Proxxon mini router. See how to make a base helmet here. kzbin.info/www/bejne/l5KUh2qeeN6siZY

[@ekkkkksh]

This is just what I was looking for but is this wearable? The opening at the bottom looks too small to put it on

[@PigtailChannel]

To wear this helmet, you need to make a slit. The location and how to make it varies depending on the character, so please refer to another video I made.

[@rabazazamaribo]

Thank you!! You´re the best!!

[@玉子-w5n]

この動画を拝見してベースマスクを作成しております‼︎ とてもわかりやすく勉強になります‼︎ ちなみに少し質問なのですが、張り合わせの部分をもっと段差なくツルっとしたマスクを作りたいのですが、コツなどはありますか？

[@PigtailChannel]

張り合わせた部分の段差の処理ですが、ワタクシも本当に悩んでおりまして、これといった解決法が見つけられないでいます。強いていうなら、ベースマスクの材料を、COSボードのような密度の高いスポンジシートを使うこと、カットする際に垂直にカットすることくらいでしょうか。目地シールもツルッとした表面にはならないですし、いまだに試行錯誤してます。すみません。

[@玉子-w5n]

@@PigtailChannel 返信そして色々なアドバイスありがとうございます😊早速教えて頂いた事を試してみます‼️ pigさんの色々な動画を拝見してるのですがドンドン新しい技法とアイディアを盛り込まれてるので本当に凄いですね‼試行錯誤の結果が見えるのでとてもありがたいです‼︎ また、連続での質問で大変恐縮なのですが、樹脂andモリモリパテで加工している動画を拝見したのですが樹脂は何を使われてるのか教えて頂く事は可能ですか？

[@PigtailChannel]

@@玉子-w5n 樹脂は、スムースオンのD65という樹脂を少量頂いたのでそれを使いました、ただ、日本では入手しづらいため、現在、代替品にてベースマスクをコーティングする動画を製作中です。これがうまくいけばFRP製のマスクのような外観になると思います。しばしお待ちを。

[@玉子-w5n]

@@PigtailChannel なんと⁉︎ それは楽しみにしております♪ アップされたら必ず拝見しますね(^^)

[@bucket290]

How much cm is this eva foam and can you olease send me the exact link

[@pest-alt-account]

10mm foam, hope i help

[@howlingwolffang2221]

How do you adjust it to your own head size

[@PigtailChannel]

Check out this video. kzbin.info/www/bejne/e3-qZppricp6ftE

[@Lavender_Gooms25]

is there any way to adjust the template size before printing?

[@Lavender_Gooms25]

i found an easy solution if anyone stumbles upon this same question. i'm sure this can work with other software, but i used GIMP to import the pdfs. After importing i used the resize tool to make the picture larger as i needed and for some i had to rotate the image to still have it fit within a normal sheet of paper. After getting it to fit right you can print right from the file tab

[@marinogundamboy9012]

thank you very much!! This is a very big help for me! :)

[@angelicaolguin3301]

Hola cómo puedo obtener las plantillas, gracias

[@PigtailChannel]

Puedes descargarlo desde la sección de resumen de este vídeo. kzbin.info/www/bejne/e3-qZppricp6ftE

[@PjetTheKing]

Built it with cardboard. Great template but i had to edit mine to fit my head when putting it on

[@PigtailChannel]

If you want to make it with paper, please refer to this video. kzbin.info/www/bejne/fHm6Z5hjiseSo6s

[@t0tally-notafel0n]

Great tutorial but I have a question, are you meant to print 1 and 2 on the same paper or is it meant to be separate?

[@PigtailChannel]

Please print out 1 and 2 on separate pieces of paper. Then, make a pattern by pasting numbers 1 and 2 onto a large piece of cardboard.

[@kenzo_hi8904]

Thank you for the templates they were right shaped

[@nerothejackal9662]

Could this also be used for kamen riders

[@andreapiazzo]

How can I do the eyes on this pattern?

[@PigtailChannel]

This is a base helmet. The way the eyes are made differs depending on the character. Please watch other videos I made.

[@nanmaida-sanmaida]

おすすめのパズルマット教えてもらえませんか？製品によっては毛羽立つので切りにくかったりします

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。私が使用しているマットは、ロイヤルホームセンターで販売しているパズルマット10ミリ厚です。ただ、近所のホームセンターがそこしかないので使っているという感じです。

[@khiembui8298]

Thank bro that help me make my first helmet

[@satoshi7490]

How can I measure and fit this? I’m new to cosplay so I need lot of help…

[@PigtailChannel]

Watch this video to learn how to change the helmet size. kzbin.info/www/bejne/e3-qZppricp6ftE

[@Giojo820]

How large do I print the template?

[@GAGAGIM-j5y]

型だけでもカッコいい☆スパイダーマン作って欲しいです(*^^*)

[@ヨシヒロ-h6j]

出来たらMCU版の目が動くタイプが良いですね！

[@れとー-z9g]

アメスパ2のも、良いんじゃないですかね！

[@teohb8413]

Quick question, what is that helmet size??? Because I think I kinda have bigger head 😅

[@PigtailChannel]

Watch the video here. kzbin.info/www/bejne/e3-qZppricp6ftE

[@receitando8493]

I want to do the Kamen Rider Black, can you tell me how to do the eyes?

[@ragztv4927]

Sir please make choudenshi bioman helmet too🙏🙏🙏 Thnks ao much.. i learn a lot from your videos

[@ragztv4927]

Pig tail is a good man. He shares his talent. He teach other to learn. I salute you pigtail👌

[@artrash2741]

Tnx for this bro 💪😊

[@JURAMI2525]

どうしても１と2番を印刷した後重ね合わしてもサイズが違うのですがどうしたらいいでしょうか。 どちらも108％で印刷しています。

[@PigtailChannel]

型紙は手作りのため、ズレているところがあります。なので、なんとなくいい感じで貼り合わせてください。

[@nghiaphanquoc1604]

Can i ask you something? I have make a base mask with the template you put in the video but i don't know why is my mask's back head is too big Can i do something to fix it?

[@PigtailChannel]

I noticed that the letter size pattern was uploaded with the wrong size. New data has been uploaded, please download it here. drive.google.com/drive/folders/15a_SVJqfgaFAa8NLM8ZYQTdS9jXEOI93?usp=sharing

[@Pesyan]

アンテのWD.ガスターを作るのに使います！

[@PigtailChannel]

型紙のダウンロードはこちらから（A4サイズでプリントアウトしてください。） Click here to download pattern paper (Please print out in A4 size.) drive.google.com/drive/folders/1r3XFhZno7hpKfhmOhOEi47OANKm7WaLZ?usp=sharing

[@stephengarza2213]

Thank you!

[@aryantizuannauzitnayra4907]

Koniciwa..

[@PigtailChannel]

@@stephengarza2213 Thank you for watching my video.

[@PigtailChannel]

@@aryantizuannauzitnayra4907 Thank you for watching my video.

[@ryoushi5989]

こんばんわ～。すいません、型紙を頂きたいのですが、URLがエラーとなってしまいます。一度確認して頂いても宜しいでしょうか？

[@eoran-27]

May I ask, what is the difference between this template and the previous white template? thanks

[@PigtailChannel]

Thank you for watching my video.　This template has a narrow head. It is used when making a super sentai helmet. Another template is round the shape of the face. I use it when making a helmet for Masked Rider.

[@英二-h9y]

型紙ダウンロードは、どうやったらできますか？

[@ヤシの木-s3z]

今pigtailさんの型紙でガワ作りに初挑戦しているのですが、なかなか上手くジョイントマットが切れません 何かコツのようなものはありますでしょうか 一年以上も前の動画にすみません

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。ジョイントマットをカットするときに使うカッターの刃を、「特選黒刃」などの切れ味の良い刃にするのが良いと思います。あとは慣れですね。

[@Lua_73]

what would you recommend to make the helmet a little bigger?

[@PigtailChannel]

If you want to make a large helmet, you can enlarge the pattern when you print it out. Please refer to this video. kzbin.info/www/bejne/e3-qZppricp6ftE

[@Lua_73]

@@PigtailChannel thank you very much

[@らいライ-f5x]

これでゴーゴーファイブ作れるかな

[@yokushyu]

使っているマットの商品名など詳しく教えていただけないでしょうか? どれを使っていいのかわからなくてとても困っています。

[@eugenerim]

ありがとう戦隊!超！

[@SuperBorisu]

A4の型紙を★は★、■は■で貼り合わせてみましたが、いざ切り口を合わせてみると長さが合いません💦 何が間違ってるのでしょうか？

[@PigtailChannel]

型紙は手作りで作っているので多少の誤差は生じます。あと、プリンターヘッドの動作には個体差があるので全く同じにならないことがあります。

[@SuperBorisu]

@@PigtailChannel あ！そうなんですね(>_

[@ricardopinto1339]

Can you do geki violet? Also, it is possible to cover the Eva foam with fiber glass sheets?

[@PigtailChannel]

It seems possible to cover the EVA foam with a glass sheet. i haven't tried it. I find smooth-on epsilon pros easier than glass sheets.

[@ricardopinto1339]

@@PigtailChannel smooth on epsilon? Whats that?

[@PigtailChannel]

@@ricardopinto1339 Please refer to this video. kzbin.info/www/bejne/rYq5fIipopyUrJo

[@Poipounda007]

Awesome Video!

[@やまたく-q4s]

10mmのジョイントマット買って乗り型紙に沿ってきり、くっつけたのですが 先っぽの部分が全て揃わずに凹凸になってしまいました。 買ったマットが高硬度のものだったからでしょうか。おすすめのマットはありますか？

[@PigtailChannel]

スポンジシートはホームセンターで購入したのでおすすめとかは特にないのですが、貼り付けるときに両端の先っぽを先に接着してから真ん中を接着するようにしたほうがきれいにできると思います。

[@M.A.EProductions]

What size paper did he print on cause it's bigger than the one I printed off

[@khairpur1]

What's the name of the paper you used to stick the templates onto with the gridlines?

[@PigtailChannel]

The paper I used is thick paper called "graph paper". This paper is common in Japan and can be purchased at stationery stores, supermarkets, and 100-yen shops. cutt.ly/Nb7R5nF

[@booghoul1054]

Hi, is your template paper A4?

[@PigtailChannel]

The Super Sentai base helmet pattern is available in A4 size and letter size. There is a link in the summary section.

[@sukusuku725]

接着うますぎです🥹自分の場合接着が下手すぎて隙間が開いてしまうのですが(それも大きな)この場合なにか埋める方法はありますか？

[@PigtailChannel]

隙間を埋める場合は、「目地シール」を塗る方法があります。こちらの動画の16:18〜がわかりやすいと思うので参考にしてみてください。 kzbin.info/www/bejne/eITYdnyDpc-SiZY

[@sukusuku725]

@@PigtailChannel ありがとうございます🙌

[@保存-i8k]

凄い技術！

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。

[@paoloangelosalas9249]

Hi! Did you print that using pdf?😃

[@PigtailChannel]

All the patterns I publish are PDFs.

[@タック-y3w]

この動画を見てベースマスク作成できました！素晴らしいクオリティで凄いです！質問なのですが…頭のサイズを63ｃｍにするにはどうすれば良いでしょうか？完成して被ったらアゴが出てしまいまして…可能でしたら教えて頂けると嬉しいです

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。サイズ変更は型紙を印刷するときに拡大してください。（63cmなら105％）

[@タック-y3w]

すみません！ありがとうございます！教えて頂いたことをやって、製作したいと思います。本当にありがとうございます！

[@うほいちゃん]

サンレッドが作りやすそうですね！

[@PigtailChannel]

動画を視聴いただきましてありがとうございます。どんどん活用してください。