Free Power mod Manufacturers Don't want you to know | Kawasaki Z900

[@mikeivinson]

Completely free power as long as you have a $12 stainless pipe, a $238 muffler, and a $400 wire feed welder just laying around. What's more simple than that?

[@DaddyDog]

Lmao exactly my thoughts 😂

[@Uber1Noob]

Also needs a tune. Increased airflow n all. Does he know about air filters?

[@landen702]

Who doesn't have all that just laying around? Peasants.

[@GreenDragon636]

In order to keep the AFR at a safe level without ECU tuning you should keep the catalytic converter and replace the muffler and resonator only, essentially installing a "cat-back" system. Since the Z900 has the resonator connecting directly to the headers it is best to just install a muffler and leave the cat and resonator in place, creating a "resonator-back" system. Removing the catalytic converter will create the lean condition you are referring to when using a full system, which is kind of what you did when you removed the catalytic converter and replaced the OEM muffler with a free flowing short GP muffler. Also, it is important to note that removing the catalytic converter is illegal and can result in a 10k fine. Since you removed the catalytic converter and installed a free flowing muffler an ECU flash is needed to adjust the AFR to correct and safe level.

[@richardballs8618]

Cringe

[@drenkajdomcaj]

He didn’t even respond lmao

[@drenkajdomcaj]

Super cringe

[@risladav967]

totally agree!!! spot on!

[@jamaalfjordan]

you see he didn’t eliminate the CAT sort of the point of video

[@TheBaldDog32]

"There's alot of misinformation out there about exhaust and tuning..." but yet continues to upload this video.

[@darthtyranus7683]

I am a firm believer this is Kawasaki's top 5 best sounding oem mufflers

[@mkx200sx]

Cool, but you didnt proof anything: - we cant hear the actual sound - we cant see dyno results

[@SGK23TV]

I don’t want it to loud” So I’ll put an LV-10 on it” 😂 Good video but I think you might be trolling us a bit. Ride Safe

[@Spikeg7]

How doesnt this have more likes???

[@Mikkel111]

“I did not modify anything” *Just removed the cat and replaced secondary muffler with baffled straight pipe…*

[@markjohnson8276]

My thoughts exactly.

[@cmbiker]

Thanks for posting this. Your explanation about the breadbox vs the cat in the pipe leading to the headers is enlightening. A lot of people think if you remove the breadbox on this bike, you remove the cat which as you have demonstrated is obviously not the case.

[@oliverseal6462]

The Catalytic Converter is where most of the restriction comes from. How can you think this is any better than a full system replacement and will not require a retune? Getting rid of the breadbox will also shaves weight off of the bike.

[@steves3261]

If you didn't dyno before and after, you don't know if you gained any power or not.

[@Bloomis1123]

Should tune it after cat delete right?

[@DirtGearTv]

I would

[@nrsimhavallabha5128]

I have a 2020 Z900. I ordered the mid pipe from Ebay for $80. I just had to cut that big box out (yes I want it loud) and clean the catalytic converter from the inside of the 40mm pipe end I had to leave for the installation. The mid pipe comes with the bracket so no welding necessary. It sounds like a beast and you can keep the original headers that have double wall and does not get blue or black. I have the same beer can Leo Vince end muffler. And just to correct: the bike WILL NOT RUN LEAN. This is not a carburetor bike. These modern ECUs adjust the air fuel ratio accordingly. You just have to ride it a bit.

[@DirtGearTv]

Thanks for the feedback! This is are a suitable option for some people. To play devils advocate, let me share why I didn't consider this option myself. For $200 you can get full "akro clone" headers which is proven performance. This video is just kind of an easy "free-bee" without going down the road of new exhaust. Notice how your bike now pop's during deceleration even after you've ridden awhile? That's a lean condition. The ECU is not programmed to compensate for changing/replacing up the exhaust, the narrow band o2 is very limited. That's an easy fix though, checkout 2wheeldynoworks!

[@nrsimhavallabha5128]

@@DirtGearTv I don't think the "free bee" showed on your video is easy because it needs welding. I don't agree with you that you must remap the bike after changing the exhaust, because the ECU will compensate for that. However, this compensation is limited and you can get extra horse power by adding an air fuel optimizer like a Power Commander; but it will not hurt the bike if you don't add it. I myself will place an order for a performance air filter and a Power Commander V and will get it tuned at a Dyno Tuning, for added horsepower only. I really love the sound and looks of this Leo Vince Can, I'm just worried about water getting inside it since it is placed almost vertically.

[@MrAl67]

Yeah it will run lean. The ECU won’t be able to make the adjustment. Bike ECU is not as advanced as car ECU.

[@HughJanus987]

@@nrsimhavallabha5128 hey man I know This is old but when you installed the mid pipe was there any backfiring on decel?

[@nrsimhavallabha5128]

Yes, a little bit of backfire until I had the exhaust air injection disabled and plugged. I also had a power commander V installed, so no back fire at all on my bike.

[@davidh.holmes1379]

i love this bike! i replaced the slip on and thought BREAD BOX was cat. as well? lol i ditched mine on my new 636 and added servo buddy but my 900 i switched from stock to Akrapovic slip on, didnt like it being quiet but light! but i switched to a short can thats a LOT louder! i want the roar, and can possible save your life! ive got NO complaints on mine and ppl make a lot of compliments on this color set up!

[@userresus]

It can be even more fast?

[@engs4990]

Thanks for the video!! How does it sound with stock muffler instead of LV slip on? Just wondering if you tried that. Thank you!!

[@japfourme381]

What happened to the days when the ECU would compensate for the increase in air flow, ie: automatically send more fuel to balance it out?!!

[@DirtGearTv]

@@japfourme381 They do but the problem is many are narrowband sensors only, that are very limited in fueling corrections. Besides that most oem software is programmed to limit the amount of fuel corrections or even run the bike leaner than it should be for maximum performance.

[@genewarn3802]

Can you still use your stock muffler and still gain power by just cutting out the cat

[@dry509]

What about the close together gearing?

[@steveiname]

bolt standard silencer on if you don't mind that's the way i want to go how does it sound ???

[@jean-pierrefernandez2460]

the pipe is mostly for weight savings! Over three quarters of the power you get is from the ECU tune! The tune is required right out of the box it's not running right that's why everybody starts modifying in the first place, Considering how much everything else costs when you start modifying these days, the ECU tune is the easiest and not that expensive incredible difference even with the stock pipe Ivan's performance will do it for less than $400, you pop it off put it in the mail with his little printout form, give him a call tell him you're set up he turns it sends it back you plug it in, does anybody remember jet and carburetors remember how fun that was?

[@leocarloinalvez8258]

How about the slip-on muffler do you need to tune it or no need?

[@tambuchongpinoy2678]

Hi good day.. question! I own a z650 2018 and i want to upgrade a fork of z900. Do you think it’ll fit? Is it plug and play only? Pls reply.

[@monkmoto1887]

Cats are in the header too. Stock header very restrictive

[@janZ900]

Nice Video. Did you think the bike has more than 91 db at 4750 rpm ?

[@gabkalderon]

Hi. What if the bread box is removed and the cat is left. Would it improve sound?would it affect performance? I mean. Instead of removing what you did. Only Remove the bread box and adding a straight pipe that connects to the exhaust. Is that a good idea to improve sound?

[@DirtGearTv]

I’ve seen this mod and it does increase sound a bit. There are 3 system restrictions, cat, breadbox and muffler.

[@rrudydedogg3779]

Where do I go to get a free Leo Vince slip-on?

[@clubstyleridahd4695]

Im thinking about buying a z900. Is the throttle response smooth and not jerky ? Wasn't sure if i should pay more for the 2020+ model with riding modes or get a cheaper 2019 mode if its mellow in lower rpms without riding modesl. I had a mt09 and that was horrible in A mode was too twitchy.

[@MontanaRealtyCompany]

Ive owned a 2019 Z900 for 3 years now, I recommend it 100%. The accelerator is very smooth not jerky at all, there is engine braking but it is very minimal jerking. I daily drive it. It is a beast, oil change and go. I have 22k on it now. Your comment is 6 months old so if you got it, i hope you are enjoying it! Ride safe!!

[@jdubt8046]

Free?

[@luqmanh3243]

Great mod & content! If I were to remove the breadbox and leave the catalytic converter in do I need to retune the bike? I'm in it for the sound not performance.

[@DirtGearTv]

Thanks! Its not absolutely necessary to re-tune with exhaust mods, but understand you may run into issues with it heating up a little quicker and decel popping

[@aressimbamt0959]

people says that this bike has bearbox problem..hard changin gears and fallout of gear a lot of times.. i like it more than mt09 but dobt sure about kawasaki reability

[@CaptainChristianZ1818]

It's not entirely free power mod if you're going to cut and replace the cat converter with a stainless pipe and a Leo Vince. I'm sorry, misleading video.

[@richardmurphy6244]

I have a 2017 Kawasaki ninja 1000 abs. Just curious did you just by some stock stainless steel pipe to replace the catylitc converter?

[@tkh3760]

Any codes thrown by removing the cat?

[@DirtGearTv]

Nope

[@mikeyd2471]

Still need to flash it to the ECU, 100%. Doing this you’re running risks over time to the engine. Get it married up properly after, it’s not that pricey to flash it but while you’re there you might as well remap it 😂

[@cherishwilson3748]

Great video!

[@Dannyzors]

So the exhaust fumes are more toxic now am I right?

[@DirtGearTv]

Yes, exhaust not being processed through a catalyst anymore

[@Pabloman333]

How is this basically free? I thought you were just going to remove the bread box and replace with straight pipe, which would be low cost if not actually free. You removed the cat. Didn't that require a tune? You installed A Leo Vance slip on. Where can I get one of those for free? BTW, which part of this are manufacturers unaware of?

[@DirtGearTv]

In the vid I mention I ran the stock muffler for a while as it's unrestricted. In fact, I didn't end up keeping the Leo on this bike as it was a bit loud for my preference. I spent a couple dollars on the piece of pipe ($12 total I believe) but you're correct about using a mid pipe if you prefer to not have welded. Can also bring to local exhaust shop to weld up to save money.

[@octaviodiokno4667]

awesome, great video, very imformative

[@lenteslocas1]

My i took off everything to cat and remove my header and drill clean my cat remove all honeycomb then welding other pipe all ay to back away from tire and wrap my pipe with heat wrap sound amazing loud and notice a heck different on performance get alot more aggressively only i thing now to retune like u say

[@Leon-uh1no]

Hi really a great video! I really want to try it myself. But i have one question, why doens't it need an aftermarket tuning after deleting the katalysator? The sensor will messure different values right?

[@DirtGearTv]

Thanks Man! Technically you don't NEED a tune after even a full exhaust, but I like to do it. Taking out just the cat doesn't affect the AFR much at all on this bike. If you do the delete, checkout my video on 2wheel dyno works for your tune, they are great guys!

[@8OneOfTheNobodies8]

I got a full akrapovic system on my z900 2018 and I would not say that it is stupid loud .. it sounds like a motorcycle, taking the db killer out just lowers the tone .. but yes a ecu flash are not official recommended from kawasaki but the bike will run much better after a ecu flash

[@prasannareddy5386]

Bro put the stock silence How sound...

[@topprovider8769]

Thanks dude!!

[@tyjaster8467]

I really liked your video, so thanks for doing it. It was pretty difficult to tell from the video, but did the volume of the exhaust go up after the modification at all? I know the sound changed, but I would like a bit more noise out of my SC Project exhaust and am wondering if this might be the solution. I don't like an exhaust that is obnoxious but I like to be heard. Also, did the modification do what you expected it would? Increased power, no popping? Thanks again!

[@DirtGearTv]

Yes volume increase is noticeable but minimal (maybe 2-3db). It does increase power but not as much as full header would. My top recommendation to anyone wanting power and sound is headers. I really like my clone headers. Cheackout my “Akro Clone” video, I describe how to do the AIS blockoff which will prevent popping.

[@tyjaster8467]

@@DirtGearTv I watched the clone akro video and after spending over $700 CAD on my slip-on I may try just the de-cat mod as I want to keep the cost down as much as I can. To be honest, after spending that much in the slip-on I was really disappointed with the sound. It is still a really quiet bike. I'm also less interested in power gains (it has good power) but the torque is fantastic. BTW I had to change the chain and sprockets recently so I knocked it down to 14 teeth on the front sprocket and went to a 520 chain.. the torque is nothing less than addictive. I would highly recommend doing this to anyone with a z900.

[@DirtGearTv]

Yes unfortunately slip on alone doesn’t do much for these bikes in terms of sound or performance. I think you will be please with the sound improvement by deleting the CAT. Certainly for the cost of it it’s well worth doing 👍

[@paulshcherbakov5159]

Bro! Can you show sound is now without a second exhaust ??? On my Z900 I use the original lower exhaust only, I want to see how the sound changes if i make a pipe like you did, Thanks!!!

[@tims.4891]

Don't think your bike is going to run great, u need a tune and definitely u need to disable your lamda, only thing u gain is noise, lots of it, just got of the dyno with my z900 from 2020, only put a slip-on and a sport air filter on it, disabled the pair valve (to get rid of the popping sounds) and disabled the lamda in the tune, makes 134,7 hp and 104 Nm torque (got the graff to prove it) the on-off is gone and got lot's off more power in the mid and high rev's. More sound = not more power!!! And a small tip, before u tune your bike, get a better front and rear suspension, i got the andreani inner front fork and a hyperpro rear.

[@kaisersozee6541]

That’s all I want to do as well. Are you sure no tune is needed? I have an m4 slip on and k&n air filter as well. I really don’t want to have to tune and flash ecu. I’m just looking for some more sound and want to make sure this won’t screw up anything? Great video and please let me know how it worked out ?

[@DirtGearTv]

You should be fine without a tune, it’s deff not going to harm your bike but you’ll want to do the AIS block off to prevent decel popping. You should like the sound with a slip on and cat removal, not going to be loud but will have good growl to it

[@kaisersozee6541]

Thanks for quick reply. This is all I need n feel the same as you. Don’t want obnoxious loud I just want a lil more growl. Ya have link for ais?

[@kaisersozee6541]

Ok perfect 👌🏼 I would do a full tune n let them dyno if I had to buy, honestly just like I said I want a lil more growl is all. Not interested in changing the response because I love it ! If there is a link for Ais I’ll order now 👍🏼. Now it purrs nicely and neighborhood friendly but, they will survive! Lol. 30-40percent meaner and I’m good. I definitely don’t wanna lose my bottom half. Thanks in advance. I’m getting both arguments from my group but, the ones I trust are with me lol. Love em but, some friends have no clue. I check n check ✅

[@kaisersozee6541]

@@DirtGearTv 📍

[@Los1020.]

@kaisersozee6541 did you end up removing the bread box?

[@anwarrodriguez22]

Will the check engine light come on? If so, what do you recommend?

[@DirtGearTv]

It shouldn't come on, if it does, put some miles on it and will go away

[@prakashchoudharyvlogs8512]

awesome explanation and video man. i have a question! i have z900 2019 model and i have cut down the bread box but did not cut the CAtalytic converter. i still have the catalytic converter on the bike. i am using an after market slip on after cutting down just the bread box. Do I need to use a power commander or remap the ecu now?

[@gabrielederi6643]

Zero.1 my friend doesn’t run a remap and he is fine, no noticeable power loss! Just an amazing sound

[@DirtGearTv]

You will hear many opposing views on tune vs no tune. Its not that one is not right and the other is wrong, it just depends on your personal goals. If you are after best performance, than of course you will want an aftermarket tune. You really cant compare a bike with exhaust changes and no tune to a bike with mods and a tune, the difference is huge. If however, you are already satisfied with your current performance or your changes were minimal its not going to hurt the bike to run it with the stock tune. Hope that helps!

[@prakashchoudharyvlogs8512]

Superb you are. Thank you for replying. I was worried about engine issues later so thought of asking... I hope I won't have any engine issues with the current set up

[@keithdaniels1994]

Need a road test vid.

[@jhh2j]

What kind of welding machine did you use? TIG? Thanks!

[@DirtGearTv]

I'm currently using the Harbor Freight 170a/240v wire feed setup for mig. Its a surprising good little welder. I use it with flux core and gmaw

[@henryespiridion3316]

Nice idea Bro

[@zacharymcculloch2248]

Great video, looking to do this as well as get the ECU flashed by dyno. Could you let us know how long the replacement pipe is you are adding?

[@DirtGearTv]

I measured the length of replacement pipe right around 145mm

[@tommylauzon6118]

Question: would keeping the stock muffler and simply replacing that middle pipe section still increase the sound loudness or does most of the change come from that leo vince slip on?

[@DirtGearTv]

Both mufflers do a pretty good job of reducing db. Most of the sound increase comes from replacing the first muffler and the CAT. Very little sound difference just doing the slip on

[@nahidulhaq3236]

Hi, does this mod need a ECU tune/flash?

[@DirtGearTv]

Nahidul Haq It’s not absolutely necessary, however it’s a good idea to tune after exhaust changes are made

[@MardenGimenes]

Big Thanks from brazi!

[@sharryglobetrotter5623]

Do you have a better microphone? I would like to hear the sound after! Thanks

[@DirtGearTv]

I do, but the bike has been changed at this point so the sound wouldn't match if I record the current setup, sry

[@nikolaoskatsoulis1831]

Amazing video! So by putting the straight pipe you gained more low end torque but did you also get an improved sound??

[@DirtGearTv]

Thanks and Yes, the sound was a pretty substantial improvement!

[@nikolaoskatsoulis1831]

DirtGearTv ok thanks! Do you think a slip on exhaust would do the job for the sound or a full system will be better?

[@DirtGearTv]

Honestly, removing the CAT did more for the sound than the slipon as well as power. One of the reasons I made this vid was because of my disappointment with a slipon only. Watch my video on the clone header system if you want the best budget option! Good luck

[@nikolaoskatsoulis1831]

DirtGearTv ok thank you very much!

[@Barwood35]

Lol that weld. Interesting mod.

[@tanjinassecretrecipes8380]

thanks this was so helpful

[@DirtGearTv]

Glad it helped!

[@Andrew714oc]

Thank you for this awesome DIY video! Mind sharing the Ebay link for the $11 2.9" stainless pipe? Thanks again!

[@DirtGearTv]

I believe this is the one: www.ebay.com/itm/113533165622 I think you'll be happy with this mod. Also as a followup, I'm currently working on another "mod" video that will accompany this very well. Will be a killer combo, so stay tuned!

[@Mikkel111]

If I removed the primary muffler and replaced the secondary muffler with a slip-on, would it be too loud? The reason I want to do it that way is because then it’s still legal regarding emissions.

[@angrygorilla3872]

It will be quite loud. Depending on the slip on. Mine is very loud. I bought it that way though. I would suggest listening to exhaust videos if they are available.

[@kirkleidemann5051]

In my state (PA), bikes are not tested for emissions.

[@Mikkel111]

@@kirkleidemann5051 Cool. In my country, people sleep in beds.

[@CZIndonesia]

Big thanks !!

[@gazsiextaz]

You need to adjust A-F ratios otherwise the engine will run lean and overheat. Best case scenario it goes into limp mode. Seriously guys don't decat you bike, most of people will not be able to use the extra power and even with a power commander, it will only increase power at the top of the RPM range. Moreover, modern engines are built with the catalytic converter(and the backpressure thereof) in mind so it doesn't neccesarily "hurt" engine performance.

[@monkmoto1887]

Back pressure isn’t a thing for making power or torque. Basically every bike makes more power bottom to top with a flash tune and opened up exhaust. Furthermore, just because you can’t ride your bike doesn’t mean the rest of us have that problem, the extra power is better to have and not need.

[@steveh9078]

I love my stock exaust sound.

[@lujangaming2354]

Like 7 from us keep up the great quality content 👍

[@DirtGearTv]

Thank you! Will do

[@Ramses19912]

His story about air/fuel ratio is incorrect. Nowadays bikes have lambda sensors to adjust the air/fuel mixture dynamically through a feedback control system to a set ratio by the manufacturer including any set limits by any goverment regarding emissions. In otherwords, Kawasaki engineers set a target air/fuel mixture in the ECU of the bike, the lambda sensor registers the emissions (before it is filtered by the cat), then sends it back to the ECU to adjust the mixture. Then why should you tune your bike anyways if thats the case? To adjust the target air/fuel ratio, because the best mixture for the most favourable emissions is not the same as for the most powerfull setting or the best economical fuel consumption setting. If you dont believe me, google a bit about lambda sensors and especially search some emission charts.

[@DirtGearTv]

Ramses19912 What story? All you did was simply repeat what I say to people in my videos. Checkout the video on 2WDW and why an aftermarket tune is important.

[@Ramses19912]

​@@DirtGearTv 1:10-1:45 yes you have to tune if you want to get the most out of it indeed. However, at 1:25 you state that you are going to lean out your mixture with a full exhaust system and that you have to throw more fuel at it (with a tune I assume you meant). This is not true as your ECU will automatically adjust the air/fuel ratio to whatever it has been set to in the ECU, it will not run leaner nor richer. On the practical side, you do need to account indeed that the bike will startup lean after an exhaust system/air filter upgrade and requires some time for the ECU to recover its air/fuel ratio. So in short, what I understand from what your saying is that you lean out your system by upgrading your exhaust system and that you need a tune to get the air/fuel ratio back on track (or better). What I’m saying is that it’s not necessary to tune your bike after such an upgrade as the air/fuel mixture will be restored by the bike it self over time (say 30mins?).

[@DirtGearTv]

Ramses19912 It’s a common misconception that because a bike is fitted with a narrow band sensor the factory ecu performs the same functions as an advanced fuel management and wide band O2, in short it does not. Your factory narrowband sensor is not giving you an advanced reading of AFR it’s basically telling you it’s lean or rich and is very limited in its mixture adjustment. An aftermarket tune is a completely different, if it were the same thing dyno tuners wouldn’t be in business. So yes once you make any changes to exhaust you’re already outside the parameters your factory ECU will compensate for, this is why as soon as you change your exhaust the bike will pop on decel and we correct this by plugging the ais

[@Ramses19912]

DirtGearTv if the mixture adjustment is very limited then it wouldn’t make sense a tuner could fix that. The only thing a tuner does is adjusting the target AFR to what the wishes of the owner of the bike wants (more power/better fuel economy). It doesn’t make sense a control system is not capable of controlling its own system. A lambda sensor, doesn’t provide data about AFR, it provides data about emission particles as each AFR has its own composition of different emission particles like NOx and CO2, the ECU then translates this to an AFR and indeed concludes it is running lean or rich compared to the target AFR. But as we are speaking about a control system, which it clearly is, otherwise theres no need for that lambda sensor, it adjusts its AFR to converge to its steady state response. I own a z900 from 2018, when i took out the cat i had pops and bangs like you described, then went to a tuner because i wanted a smoother power curve and yet i still have my pops and bangs on decel. So if your theory was right this shouldn’t happen.

[@cman1406]

Man, you made this video noticed the shit sound… and you think hmmm i just Write some nice text and say sry for the Bad sound quality… but this is Beagle all about the sound. So u expect people to do the same with not knowing how it will sound. Would it be to difficult to take another shot?

[@bebotverano4476]

I like it just like that.👍

[@nagachief984]

I thought it was never remove the cat unless you go full system :0

[@DirtGearTv]

Why’s that?

[@user-sx7hf3kr4z]

I have an fz09 with a cat on it, I was gonna take it off when I got the bike 30k miles later now its still on there Lol I'm going to do it soon I swear probably not though 😅

[@TheAsheybabe89]

Sound like a woman

[@evisusmith4438]

Does that void warranty?

[@DirtGearTv]

No different than putting on an aftermarket exhaust

[@akshaykrishna5832]

I must say you look at least 10 years younger in that White Tee

[@akshaykrishna5832]

@@louieg5766 it was a compliment buddy, don’t get your panties in a wad. He looks very young in that Tee as compared to the shirt. That’s all I said. Relax.

[@brainoil6390]

Bro.. you deserve a sub from me!

[@DirtGearTv]

Legend!

[@BearCountry]

Why did you put that bread back in to your bike ? Better remove it looks heavy

[@rubiwick7264]

greaaat video!

[@AaronWater]

Isn't that irresponsible to remove the catalytic converter? I thought it was there to convert all the unburned fuel in the exhaust to prevent it from getting into the environment.

[@DirtGearTv]

Depends on your local laws. No race vehicles use catalysts and when you put an exhaust on a bike you're removing it anyway

[@BILLEDEAUX]

Video: “Free power mods!” Ads: “Did you know you have 5-20lbs of toxic poop in your body?”

[@DirtGearTv]

😆

[@jermur8053]

Headers produce torque.

[@StarryNightSky587]

Why would this do more than 9x % of aftermarket systems? A well dynod akra or scorpion full system will outperform your garage solution any day. But yeah, remove the cat... why even bother with low emissions right...

[@DirtGearTv]

I never said it would do more than an aftermarket system, I said it was cheap and easy free power

[@ragimundvonwallat8961]

emissions laws are scams

[@StarryNightSky587]

@@ragimundvonwallat8961 really, weird how the ban of lead in fuels lead to lower lung cancer rates... must be a scam.

[@ragimundvonwallat8961]

@@StarryNightSky587 rigth, it is

[@dragosconstantin762]

now is euro1

[@kneedragger6680]

Ok first of all that's ass back words if you remove the cat. YOU DO NEED to tune the bike for what you want you should leave the cat cut off the exhaust expansion box or as you call it the bread box then fit a pipe from the cat to the muffler that is the right way to do it with out a tune. and will give you about a 10 hp increase taking out the cat. will lean out your bike getting rid of everything after the cat. will but the stock ecu will correct that small amount and yes i do have a z900 its a 2017 and i do know what i'm doing not trying to be a dick just stating the facts i mod bike for a living fyi. here is a vid. on the right wat to do it. kzbin.info/www/bejne/fmSafGqhfZiZlcU

[@DirtGearTv]

This is one way to do it, definitely not what I would call "the right" way. Also you can buy a connector pipe for like $60 on ebay for this mod rather than turning the bike into a chopped up turd. So I agree with you in part, however the ECU will not correct this much of a change in exhaust, it was never designed to. If it didn't require a tune than why does it lean pop after the change is made?

[@Deuceblank]

I dont see how you wont need a tune cutting out the cat.....u basically got a shitty header straight pipe with 2 open-ish mufflers.....a dyno run and with a tuner checking fuel would convince me

[@switchblade762x51]

Dumped it all. Yoshimura Cyclone ...117dB no baffle. 100dB baffled. I like no baffle😂😂😂😂

[@javiconga]

Yeap, another check engine light that don' t leave😕

[@EBthere]

Nice!

[@deentje92]

lost me at the welding part, as soon as i saw a mig/mag torch i was like seriously? seriously not gonna tig weld it instead? then on top of that some (...) quality welds being grinded the shit out of, nah man... not gonna take any advice from you thats for sure! xD

[@MrBYRON-iv5uo]

*BASS BOOST ON 🔉

[@stephenluke4269]

this isnt legal anywhere

[@duroxkilo]

don't be farm mechanics pls. being wise or experienced in one field doesn't transfer that know-how-why to all other areas of one's life :} the gains are more on the feelings' side of things than actual bike performance in most cases of mods. (proper suspension setup makes the most noticeable improvement in any wheel based machine) is there a noticeable difference in performance between a full tank of gas and 1/4? that's 20lbs weight reduction and yet it's unnoticeable. who's able to gauge how much gas is in the tank by 'how torquey' the engine feels? even a best case scenario mod w/ 10% power increase is the same (a pipe can't do that alone)... racing is different because the machines are pushed to their limits. be nice be safe have fun everyone ps that's a nice exhaust tone.. but it's loud, it gets old quickly if you don't live in a loud city :}

[@GonzoMewzik]

Holy shit you don't know shit about modern EFI. In no way does a full exhaust cost you HP. It always results in a gain. The ECU adjusts air/fuel live. So opening up the exhaust will cause the ECU to compensate. The reason why a tune really opens up the HP and Torque is because from the factory, bikes are tuned for better fuel economy and emissions to meet Euro 4/5 mandates. Either a plug and play programming ECU pigtail (dynojet) or having a Dyno tune from a shop will change the factory air/fuel mix to something much more aggressive.

[@DirtGearTv]

You did realize in the video I'm advocating for "opening" up the exhaust right?

[@feckall9118]

Why do you think the cat is there? Maybe not a bright idea to remove it. in US it might not be a thing, but if u remove the cat from bikes or cars in EU, you get a huge fine when caught, due to the EU 5 emission/polution standard.

[@DirtGearTv]

And yet 2 strokes are in abundance in EU which produce 50x the hydrocarbon emissions

[@feckall9118]

@@DirtGearTv abundance? where do u get your info from?

[@dustinenglish4389]

Power valve delete

[@marcz9482]

Free? We're did you get the free muffler, BTW sounds like poop

[@김승찬-b7y]

Hi starlord

[@domeniconinja]

Ciao ✌se non cambi i collettori completi e maggiorati, e' un lavoro inutile... 🏍 🔥🔥🔥

[@TranslateToEnglish]

Invest in a better microphone.

[@russ02281990]

Think I'll stick with virtually every engineer and engine tuner and even exhaust manufacturers who have a huge r&d department over your none scientifical and un proven idea......

[@DirtGearTv]

CAT removal “non proven” good one 😂

[@homaditya]

I think you ought to understand the purpose of the catalytic converter before making that biased comments. Hint : it is used in industrial chimneys and wind turbines. So umm, research, maybe?

[@stonehouseguitars3869]

Akrapovic blows, the quality of their exhausts blows. After one full system ill never buy one again. Junk fitment started leaking junk hardware and mounting junk returns process. Junk sound. Overpriced. Bad welds.

[@mikeyd2471]

This video is shockingly wrong information, completely contradicting himself most of the way through the video. Do not listen to this guy, he has literally no clue what he’s talking about 😂.

[@DirtGearTv]

Hi you must be new here, welcome! Myself and the community here love to hear differing opinions, so maybe you'd care to expound on what's "wrong" and how you'd do it "right"? Easy to say others are wrong so please back it up with how specifically you would build it oh great one 🙌

[@iNDREI_Ro]

Gosh, I love America. I'd go straight to jail if I removed the CAT.😂 I live in Evrosoyuz.😢