Body Armor for POLICE & SECURITY | Special Threat & Rifle Plates

[@fattywithafirearm]

Recently got hired to a smaller police department. Had to supply most everything. I was issued a new vest and uniforms but other than that I had to supply the rest. I'd love to get the FRAS for my vest. My dad was issued a 2nd chance vest when he became a cop in the early 80's. He got his survivor number in 1986

[@freefieldtraining]

Safe Life Defense Body Armor FRAS www.safelifedefense.com/ *Use code "FFT10" for 10% off everything*

[@reapagedk]

I really like the safelife fras plates. I use a 3a+ from them

[@fattywithafirearm]

@@freefieldtraining thank you. I hope that I dont ever get a survivor number like my father did. Was interesting to see my dad tear up when he say me on my first shift as a cop. He didnt want me to be a cop. But this is what iv wanted to do since I was young.

[@bebop_557]

Tommy, I don't think I've mentioned enough how valuable these armor videos are. There's a lot more to body armor than "it's rated for this, and it's NIJ certified". (Hell, if anything, I've been vocal about how I think the NIJ standards are less than stellar to say the least.) These videos aren't everything. But to see someone who actually gives lots of experienced input on armor like you do is a valuable part of the equation when it comes to selecting your own armor.

[@Narsuitus]

I have six soft and six hard sets of armor that I use for various threat environments. Your video is one of the best I have seen on the subject.

[@varmint87]

When i first got into private security back in 2009 I went to a police supply store to get measured and fitted for a vest. Told them i wanted the best that money could buy lol. Ended spending $700 on a American body armor xtreme. Made out of dyneema. Had them sew an extra 5x8 pouch on the back of the two carriers and bought two t-15 titanium plates that were identical to the K-30 in your video. Back then the t-15 was $80. Funny how they are so cheap now! total bill was around $1000 😬

[@flgman596]

I got the safe life for duty but been weighing my options on adding plates, I want to but that FRAS is so new, and pricy...

[@Jay-ho9io]

How much is your life worth? You'll make the investment once, and if you have a really bad day it'll help you stick around. And the flexibility and lightness will be a held a lot easier on your back.

[@SecurityGuy71]

Thank you for the great video's that you put out they are very informative. I have the Safelife Defense Level IIIA+ Multi Threat vest. I am now waiting on delivery of my new SLD Hyperline Level IIIA vest and the FRAS Level IIIA+ plate after watching your video keep up the great work.

[@SnapshotSniper]

Been watching some of your videos. Your a good human being. Thank you for your service and invaluable information.

[@KellySmith4145]

Back in my day, 1980s, we weren't issued body armor since I was on an armed reserve unit

[@olympiabase8204]

Trauma inserts are not rated for any levels of ballistics, they arent just extra pieces of body armor. They are specifically used for absorbing the energy from a bullet. You usually put a small 5x8 speed plate or standalone plate in the very front of your vest, than you put the trauma plates behind the speed plate, and than your body armor. The thinking is that the trauma plate will absorb the back face damage from the first speed plate, and minimize damage.

[@rsm1161]

Just got AR500 A1 or A2 with coating. Wear my kit twice to five times a week so the weight isn't bad. Will stop pretty much everything, coating stops spall. Only thing I wish I had was side plates

[@edwitte833]

So for a patrol officer issued an outer carrier with a 6X8 and a 7X10 pocket in front of his level 2 soft armor....what should he get as sort of an upgraded k-30 with top bend to contour the chest?

[@28_babyshark]

How much bigger in grith is the 2XL from the XL on Safelife defense 3A+ panels? The length of the vest is great. I order the XL even though their chart says large. I still have 1&1/2 gap on each side. Should I get the 2XL short or 3XL short?

[@snek9353]

There's something I'm very curious about that maybe you are as well and can answer. We both have the gear to do it, I can't imaging it hasn't crossed your mind that maybe it's worth it. I asked Safe Life Defense but didn't get a satisfactory answer. That is FRAS on FRAS, the FRAS 10x12 ICW a full FRAS vest. Safe Life gives a rating for FRAS on soft, and that sounds like something you do/recommend. But they don't say anything about FRAS on FRAS. I'm curious if FRAS on FRAS can reach a level IV equivalent and stop .308/30-06 AP and M855A1. I suspect you've questioned it yourself. Wear the soft vest and have handy or add the FRAS 10x12. The Safe Life IIIA+ is going to handle the vast majority of common threats. And the 10x12 FRAS ICW a IIIA+ will handle more capable rifle cartridges than FRAS alone at least in that area. Or wear just the full FRAS vest for the better coverage with more common rifle rounds. But what about FRAS on FRAS, or even hard plate with FRAS. Nobody that I've seen has talked about or tested anything ICW with FRAS.

[@carlosmartinezjr3213]

Hey tommy love your videos, I actually have a few question for being armed security which I just started. Can you suggest to a video on the type of ammo while carrying on duty. If you have a video of that already then awesome.

[@alvaronavarro8367]

loved this video. have you checked out the new ASP keyless doble lock ultra cuffs? i would love to get your perspective on those

[@Timothy-NH]

Which vest are you wearing at work every day?

[@flgman596]

Thanks!

[@CallsignRiot]

That fras plate would be an easy upgrade to my iiia+ vest. If only they weren't so darn expensive lol

[@jamesbrown6330]

Safe lite is all about robbing people. Go with RMA or LAPG

[@CallsignRiot]

@@jamesbrown6330 What are you even talking about? You don't even know the company's name so I doubt you're at all credible

[@baddriversofthenorcalarea500]

@@jamesbrown6330 Do you mean Safe Life?

[@jacobgarciablanco1436]

Well done!

[@edwardharoldbutler7076]

Great video Tommy. Great information. Keep up the great work. But I would recommend a lighter color shirt. Black on black is kind of hard to see the difference between plates.

[@InternationalStacker]

I like the 3+PA from warrior poet, multi threat & hit, polyethylene, 2.7lbs and only .7 thick! They are awesome!

[@thealize808]

I like the g2 stops green tip "supposedly"

[@deebsmcsqueebs5589]

RMA armor baby! Check em out. Awesome company. Great plates.

[@carlosmichael5183]

I’ve found the best compromise for me is level IIIA with 10x12 level III ICW multi-curve plates.

[@shortrecipesvlogs4137]

Thanks for sharing 💕💕

[@jdglock9114]

FRAS How about bullet impact chest at an angle instead of straight on? How does angle impact at mid chest work?

[@freefieldtraining]

Most rifle rounds within the spec at angles simply stop. Low power rifle rounds like 22 and all handgun rounds we have tried bounce off and fall to the ground a few feet away. Excellent question though, I like where your mind is at.

[@smokestriker1258]

Do you do that coffee sipping intro in reverse? Audio almost sounds like it.

[@nikodillota12]

Didn’t know John Cooper left Southland to start a KZbin channel lol jk. Love the videos brother. Keep up the good work

[@markdahlia9543]

The Fras is not a replacement for your level 4 rifled plates it is a replacement for your 3a soft armor when you look at it like that it makes a whole lot more sense

[@JustinLaFleur1990]

Right I plan on adding Lvl 4 plates on top of the FRAS panels in my vest

[@tortureddrummer]

I bought the plus vest from safe life a while ago. Worked out well. Did a lot of research on armor, and that company came out on top.

[@johnathanpindak6167]

I've thought of putting a skin stapler into my plate carriers IFAC and have seen no one else do it? So, is it a good idea, what are your thoughts?

[@TheCivilWarriorProj]

Let me preference by saying I'm not a certified medical technician anything. I have "advanced" basic trauma training from the military and fire department. Although a good idea, I would not recommend the skin stapler and here are my thoughts: If something is bleeding you need to pack it and apply pressure. If it's a minor bleeder just cover it and if possible apply pressure. Remember this is all pre hospital stop gaps. If someone enters the hospital with medical staples in them you are increasing treatment time because now someone needs to remove said staples. Another thing to consider is the legal ramification for using such device if you aren't certified to do so. Hope my 2 cents help you with your decision.

[@johnathanpindak6167]

Thank you for replying to me and after reading what you have posted I now see why doing so would be a bad idea.

[@brushemteeth9159]

Why would anyone ever just wear armor plates? I know a lot folks do, but never would do so myself!

[@kenofken9458]

They don't cover very much by themselves. I guess because you can get two steel plates and a carrier for dirt cheap. Some people say such a rig is good to stuff under a desk for an emergency. Personally I'd consider a soft vest as the priority given that most gun crime is still handgun.

[@jamesbrown6330]

That 50 grain civil defense will defeat a lot though lol

[@FREEDOMNOW33]

I got some good body armor . Every time I leave home its on .

[@reapagedk]

I like the fact that my body armor stops the liberty civil defense and the 5.7 rounds

[@TheJakobLott]

They give you that safelife for free?

[@nathalyreyes570]

Arlyfreefieldtrainng

[@stephenfannin6482]

Steel armor is baloney, frag is gonna go into your legs and up into your neck

[@jasonvoorhees2701]

How about body armor for the boogaloo

[@abdelrahmanelnasser3383]

3rd

[@raymondcastro8066]

👍👊🇵🇷

[@jakegrube9477]

*laughs in buying for civilian use*

[@freefieldtraining]

If you have a use then I hope this video helps you out.

[@acefoster3652]

Why does he drink something in every video

[@IgoOutlateAtnight]

Why just for "Police and Security"? Why not for free men and women. Anyone really...?

[@freefieldtraining]

If a farmer made a video about power equipment for farmers would landscapers complain that they were left out? Or do you think they would they understand that a farmer can only give his impression of such things from the perspective of a farmer. Would homeowners be upset if in that video the farmer doesn't recommend they go out and buy a john deere 5310 to mow their 1/4 acre yards? Some might... If you are a carpenter or plumber or stockbroker and like body armor great, and I support your right to do so, but that isn't the focus of my channel and I can't recommend you buy it for any specific purpose. So here. Is body armor for Joe blow: "Today on my opinion we are discussing body armor for Joe blow the dude who doesn't get shot at for a living but thinks body armor is cool or who has a dangerous job. I recommend getting armor that meets the realistic threat matrix for the area and environment you live and work in. If you don't have any specific threats you are concerned with them get whatever gets you hard and fits your budget."

[@nikodillota12]

@@freefieldtraining you sir...are a legend!

[@PolyCorb1]

First

[@AAa-cf1oe]

😂

[@trollovmetal2653]

"Body armor 'from' police and black youths" would be a more relevant topic.

[@gaming365yt]

Srsly