FREEWING AVANTI S V2 80MM FANTASTIC FLIGHT! by Fat Guy Flies RC

Well here is the planes info and the tools I used to assemble it with:
Avanti S V2 PURCHASE LINK: www.motionrc.c...
Features:
New! 80mm 12-blade ducted fan and powerful 3658-2150Kv brushless inrunner motor provides awesome power and incredible real life jet turbine sound
New! 100 Amp thrust reversing ESC
New! Color scheme picked by Motion RC customers
New! Optimized nose landing gear to reduce yaw and landing bounce
New! Redesigned nose landing gear door frame and gear doors to optimize aerodynamics and keep doors closed tighter
New! Thicker and stronger shock absorber parts in the main landing gear
New! More hinges to the horizontal stabilizer for improved elevator hinge strength
New! Upgraded control horns for more strength and reliability
New! Revised cockpit with pilot added
New! CG marker is now on the bottom of the wings
New! No bare white foam to prevent aging and discoloration
New! Fuselage belly protection strip prevents foam damage during landing, handling, and transport
Officially licensed by SebArt International, the Avanti's original designer
Digital hybrid metal gear servos throughout
Optimized ducting that eliminates the need for a cheater hole
Electric retracts and trailing link suspension struts for grass operation
Removable wings with quick disconnect plug
LED position lights on the wingtips, dorsal spine, and ventral keel
Magnetic removable nose cone with plastic cap for durability
Split flaps
specs:
Wingspan 1236mm / 48.7in
Length 1300mm / 51.2in
Flying Weight ~2800g / 98.7oz
CG (Center of Gravity) 105-110mm where wing's LE meets fuselage (see manual diagram)
Power System 3658-2150Kv brushless inrunner motor
Electronic Speed Control 100A thrust reversing ESC with EC5 connector
80mm EDF with 12-blade fan
Electric retracts and trailing link suspension struts for grass operation
Required Battery 6S 22.2V 4000-6000mAh LiPo with EC5 connector
Hinge Type Nylon reinforced hinges
Tool used for assembly: www.amazon.com...
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!

[@FatGuyFliesRC]

FANTASTIC FLIGHT

[@johnmarkham4861]

I just wanted to let you know I finally did the maiden on my Avanti v2 this past week Only needed a couple of left clicks of left trim on the rudder for ground tracking Flies great just like the v1 very predictable I’d send pics but not sure how to on this venue Thanks for your videos they do help on the tips I’ve noticed that you’ve started to take a few short cuts on your videos on some of your more recent builds I might suggest you not do this as for my self I enjoy the tips you point out on each build you do or setups you point out on the different aircraft’s Just my 2cents John

[@FatGuyFliesRC]

Thank you so much! I was concerned about cutting some of the build and setup videos I was just concerned about making the videos SOOOO long and people loosing interest. But what I may do is not just cut them and just tell people to just bare with me while I install these screws or what have you. The editing out stuff is actually a lot more work...lol

[@braddarnell2498]

One of my flying buddies favorite planes. I’m not into sport jets to much but it’s a great flying plane to be sure.

[@FatGuyFliesRC]

Thanks for that. I have a hard time which I like better sport or scale!!!

[@rayhicks262]

Great flight!! To get reverse thrust did you have to plug in the reverse wire in receiver or just through forward programming.

[@FatGuyFliesRC]

The receiver, my ESC in this plane is a wired rt not an electronic one. Well I mean it needs a physical channel.