Freshly Rebuilt UTV Overheats and Fails

I rebuild a 2014 Odes Dominator UTV and have an overheating problem. #UTV, #Fix, #Cheap,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: [e-mail]
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@MrJmattr3]

I’ve worked on bikes and quads for years. I chose to steer clear of the China stuff pretty quickly! Joe has unbelievable patience!

[@hunterhillesheim2173]

I got a Chinese 200 or 250 and it’s reliable

[@Ajaxaxxess]

I run a shop n we wont touch these.. any of the chinesium toy.

[@jgalster89]

Cf moto is pretty nice isnt that chineese?

[@jesses1589]

@@hunterhillesheim2173 Almost 5,000 miles on my chinese Brozz 250. Only thing it needs is a new rear tire and maybe valve seals if I'm being picky. Just a small bit of smoke after a week long rest.

[@chongshenchang9367]

He is making a video. How can he go nuts.

[@SqueakyChase]

I used to dabble in things like this but now all my tools live in the woods with each tool representing a story of frustration, anger and disappointment while trying to fix stuff. I visit them once in a while but otherwise do not disturb them.

[@mikeymike1705]

I feel your frustration!

[@mikec2825]

I really appreciate how calm you stay during the problems you encounter. I can share this with friends and not have to worry about foul language and we have learned a lot from you. Thank you sir!

[@bmaharg7990]

Do a video on what you do with all the bikes and machines you have bought over the years. You buy so many.

[@jerrywilcox9890]

That dog has no clue what's going on.highly doubt he's disappointed in anything.

[@AdrenalineRushMX]

hein😅🤣@@jerrywilcox9890

[@benmiller5015]

He flips most of them. Like 6 or 7 months ago was his last update on what all he's kept if you want to see his collection up to then

[@Whatsitworthh]

He clearly gives them away as gifts bc screw the irs and there theft

[@JackKopitski]

​@@jerrywilcox989035:41

[@dennislesh2374]

A man of infinite patience...........it's a pleasure to watch you work.

[@T0tenkampf]

I really like how methodical you are and that you pull components apart to look for failures rather than just swap in a new one.

[@cdgregOG]

Definitely appreciate you taking us along on this journey. Congratulations on finally overcoming the various challenges!

[@hondaman7824]

My misunderstanding is how you stay so chill. I would be probably be taking a 10 min break or so, so I can just throw stuff!!

[@JacobBitner]

Maybe if you could control your emotions you might be a better mechanic than you are now. I worked with a crybaby mechanic and he was always upset having to work on a car that was too wet or too hot. Eventually it came out he was gay and his boyfriend was cheating on him with a technician.

[@3kbajadude]

he does throw a temper tantrum, he just edits it out

[@thomasperez4412]

Just watched your two videos on your UTV. Wow, what a great job and your patience is remarkable. Tom is a new fan .

[@edwardestes8038]

It pays to keep trying instead of giving up.Every day there is always something new to learn.Great outcome Joe...!!

[@Nighthawk1966]

Wow, great job as usual Joe ! That thing had a lot of issues and you handled everything with ease ! You are the man ! Love your videos Joe !

[@williammoyer9063]

Very nice job, my brother. I usually don't comment but it was very satisfying to see you trouble shoot every problem and get this one completely working again. Thanks

[@tumblw33d2]

Great to see it going. The yellow wire should go to your neutral safety circuit to get it's ground, a bad safety switch or out of adjustment could cause you to see 12v and not ground.

[@NoName-qs6ei]

Could have a seat switch in line with the neutral safety. Not sure if these have those though.

[@luuk-out-below9804]

Isn't there one tide into the brake system to?

[@leosweeney7955]

I work on lawn mowers, and that is what I was going to say!

[@neilgunns8391]

I just found your channel and everyone is complimenting you on how calm you stayed during this. I find that amusing honestly. It’s very easy to stay calm when you’re editing the videos. 😂 😂

[@joemusicman64]

You always stay at it and figure it out. Great quality to have. It's made you what you are and why I like your channel.

[@gtoscowork]

So relaxed Joe. You don’t lose control and you think these problems through.

[@mikecarter8158]

At least you caught it before it blew again! Now your a pro on this engine! Great video bro!👍🏻

[@kameronrudolph3428]

Hi love your videos the calmness as you work is awesome. Im a little new to your channel,but i have to say i love that you dont have any music or long intros just right into the mystery and fun of repairing. Keep up the great work my friend .

[@Nine_883]

Yeah they would have to bleep my language and clip out my temper tantrums where tools and parts going flying across the garage. 😅😅. This young man has real control!

[@paulbudford]

This really put you to the test Joe. You came out on top in the end. Even if you didn't break even.

[@lennartengel1971]

I guess you mean 1858 miles instead of 18.580. Nice machine ! 😊

[@dbarefordable]

Great job! I'm a gear head tinkerer just like you and I thoroughly enjoyed this video.....Great Job!

[@Tigerwilson88]

This was probably the most gratifying video that you've done because there was so many things that you had to chase down over 4 videos. I feel so much smarter after watching your content. Well done as always.

[@michaelanthony3816]

Is that a starter selonoid clicking or a relay?.good luck.

[@michaelanthony3816]

What is the coolent temp in degrees not bar?

[@edkennard72]

That was an awesome video the whole series and your patience is to be commended

[@SteveTheCanadian]

Awesome video man! Great to see it worked out and wasn't another 100 hour rebuild ❤

[@patbriggsmbr]

Well done, I was gutted for you when the water pump failed, but ya did it 👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@terryharding2519]

A man with knowledge. love watching you work

[@jeffroberts532]

Another great video series, Joe. After watching you deal with this thing I will never buy one even if it is cheap!

[@harmonic3350]

100 hrs but we all learned a lot. Good job man 👍

[@justinvaughn4713]

I could watch your video all day as an owner of abandoned and gave up on machines. That i have brought back to life. I appreciate your in depth diagnosis on machines and appreciate your no BS approach to your videos. No click baot needed maan. What style impact do you use its so quiet compared to the dewalt!!!!😮😮😮😮😅

[@jeffreydean1032]

Great diagnostics and patience during a challenging fix. Good to see the video chain on this one

[@usocrazy6133]

I think what you do is really cool. Also, very helpful info to help me maintain my machines. One recommendation when getting a neglected machine is to use Pri-G if you think it has old gas. We had stale gas in a turbo charged Can Am machine that caused it to sputter. Pri-G rejuvenated the stale gas and it ran perfectly.

[@apprazer]

Always enjoyable watching your video’s!

[@arlo12345678910]

Another systomatic diagnosis and reapair by the king of small engines! Great job sir!

[@ianrowe9337]

You certainly deserve success for all you hard work & patience !!!

[@kochykoo]

Nice job getting her done Joe. It's been a hot minute but it's finally complete. It's kinda like life just when your ready to give up on it all you gotta keep fighting and clawing forward eventually you'll get there.🍻🍻🍻

[@alexandreblanc2842]

Thanks for sharing, nice to see this project finally complete ! What a patience it takes ! Often we see you doing, and it's like, oh, I could do it, seems like fairly easy job, but from time to time, this kicks in, and that's where you make a difference too ! :) Nice job !

[@tombig4011]

We have a automotive shop and we use a vacuum bleeder on cooling systems. They are the way to go especially on something like that that has coolant lines running long distances.

[@The_Real_Zaineman]

Joe, your patience is truly inspirational. I've never heard you swear once. Wow....Z 😃

[@craigr.2755]

Knocking it out these last couple days, the 4 wheeler snow plow and now this one, been waiting on these, I feel invested. Now we just need the conclusion video on the 4 wheeler!

[@dirkstellmacher423]

IT was a very joyfull time to watch, thank you 😊.

[@krzysztofdziekiewicz4006]

This thing has some power! Well done again.

[@markhensley9378]

You worked hard on this one. Great job overall!

[@tedh7543]

I cannot thank you enough for this video. It made getting my prairie out of limp mode so easy!

[@PoppinWheeliez]

Should retrofit an Led bar on top and on the front. Nice to see you crossing off projects, Joe. Well done.

[@bronzeboy6906]

Joe, your calm methodical, logical approach to this was amazing! Another “new” solenoid would have had the same problem! Excellent job! Nearly all dealership mechanics would have given up! Unless they had experienced this before!

[@bigbullhorn8443]

So glad u got it fixed. That was tough. I’m exhausted after them 3 vids!!😂

[@michaelclutton8446]

Thanks for all the videos, it was a great series. You have a heck of a lot of patience regards Mike

[@Davidhamnett]

You know the ‘fuse’ you took out for the solenoid is actually a relay.. with a control side and load side, love your methodical and relaxing approach, from UK

[@joecasatelli4825]

You remind me of my favorite you tuber ever, you never swear, which is odd, I do what you do and curse constantly, Love your content Thank you!

[@peterturnbull9133]

Not sure why I enjoy these kind of videos so much but I think I find it therapeutic …always willing you on to succeed. I enjoy the process of getting to the bottom of the issue and solving it. Never sure you sell any of your projects and if you make a reasonable reward for your hard work?😢

[@jamesharless5357]

Very nice work,great job! 👍🏻👍🏻

[@rafaelromerogamarra9524]

Always learning from you, great teacher!

[@ScottAnderson-bh6fm]

Good repair, that's great you did not have remove the engine again! I thought you might have too. nice work!

[@PaulBailey3]

I don't think I could have figured out that double positive on the solenoid. Great work.

[@memorris2]

Your ability to stay calm and collected when things break or you have to pull everything back apart is uncanny! If i had videos of me when fixing and rebuilding things, the whole video would be bleeped out cussing and yelling hahaha

[@robgto7051]

he looks everything up on google

[@donhunter5.56]

Invest in a nice 1/2 battery impact. They’re game changers. Great content once again

[@gregoryolsson6668]

Really informative diagnosis. Thanks.

[@andymann9861]

Well done, Joe! There’s no quit in Joe!

[@garymetts8357]

I watched all the videos on this machine he did an excellent job

[@musketbal]

You have the most patience I've seen for a mechanic, or 99% of people.

[@camshaftshaft2711]

Sell that sucker fast as you can lol ! Plastic gears that just blows my mind ! Your a trooper as always man good job 👏 👍😎

[@007tlucas]

Great work, way to persevere!

[@b1n]

OMG what are the odds of so many things being wrong with the cooling system at the same time?? Love the videos!

[@DialedIn57]

Good job! Lots of issues but you stayed the course.

[@1986derek]

really love your work an patience brother takes time an patiences sometimes more than others but well worth it in the end an your happy with ya work

[@cobbleup]

I hope I remember this series of videos if I’m ever given the opportunity to buy one of those things. Yikes !!! What a pile of work. 😩 Glad you finally got it sorted out !😎

[@dustcommander100]

You stayed with it and it paid off!

[@GNX157]

Joe, the cap serves a few functions when used with the over flow tank. First it will push air and water out into the overflow during warmup, but on cooldown it will only draw water back in, the cap and tank help keep air out of the system, as long as their are no leaks that stop a vacuum from forming on cooldown. Second, the cap maintains pressure on the coolant, raising its boiling point and keeping it from boiling over at 212. Depending on when the cooling fan is set to come on by the switch, it could overheat when not moving because the cap is off or bad and then the temp can’t raise high enough to trigger the fan (if the trigger is above 212) because it boils over first. I’m betting though that your vehicle fan triggers a lot lower than a regular car, which often times is 215-220 degrees, sometimes higher.

[@Synic08]

I didnt wanna type all this… but yes… all of this.

[@ni_wink84]

You can comment all you want but his kid isn’t ever gonna care, listen or try it

[@GNX157]

@@ni_wink84 He doesn’t usually reflect back on the comments, but I comment also for the fellow watchers who might not know and hope it helps.

[@ni_wink84]

@@GNX157 you shouldn’t be adding your opinions to anyone else’s videos first off, second that wasn’t the intention of my comment, my comment is that this kid has somehow managed to gain a following on KZbin by doing the wrong thing but making it work, I get you feel the need to try and explain his position, (I don’t actually understand trying to speak for someone you don’t know) but regardless the post meant he doesn’t do things the right way, he stumbles his way around things, puts together dirty parts with out checking the big picture diagnosis, anyone can make an engine fire up, it’s takes actual skill and knowledge to make it run well and make power. Something this kid has yet to master, technicians trouble shoot, mechanics and builders fix things and make power, anyone can figure out how to make gas and spark go boom, that’s not talent, that’s the basic rudimentary process of combustion

[@GNX157]

@@ni_wink84 And your comment wasn’t adding an opinion? Okay 👌

[@keyper555]

Good job, AGAIN!!! Now just need to get the doors to latch good and a piece of plexiglass for a windshield and it will be complete, and probably worth well over 10k.

[@pollo13951]

Very impressive!! Your patience is nothing compared to mine haha

[@paulweigle6872]

You have the right attitude and the patience to be a good mechanic. Well done young man, well done.

[@newbornlog2789]

I'm pretty sure he's like 65

[@sendit1158]

I MISS THE OLD DAYS WHEN YOUR BROTHER WAS AROUND . BUT I CAN SAY YOU HAVE COME ALONG WAY SINCE THEN

[@chuckbrannam2470]

Man I have got hooked on ur ur videos chuck from Sacramento California so much info

[@rvmonkey1669]

Tough lessons full rebuild always test pump impeller and replace thermostat, I have been there unfortunately lots of extra work. on a positive note, at least you have more great content to share!

[@user-fi3fx5my2s]

Looks like it's gonna be a nice rig!!!! Great vids.

[@robertcraft-pj2jp]

Very good job joe 🇺🇸⭐️

[@greathornedowl3644]

Good thing you called in our expert mechanic Vinney to give it a look see

[@markuswatson2123]

You’re a very good Mechanic ! Thanks for explaining your process and reasoning. I have learned a lot from your videos. Keep them coming.

[@harmonic3350]

The Dominator was quite an adventure before the actual adventure. That thing tears it up pretty good on the land. It's opening up its doors it wants to fly now!

[@RobertSchwartzLive]

You inspire me! Congrats!

[@benschlack5814]

Good luck with the pin floating around the inside of the engine 👍

[@SwedenLover090]

Well done! 🎉

[@ronethridge9875]

you fixed that real good man/NICE/thanks much

[@shawndaric6182]

Can I hire you to get my 1968 Triumph up and running. I Inherented this from my father-in-law and have all the original parts... It would be so cool to see it on your channel. I have watched your channel for a long time and the word thorough is an understatement.

[@ThingsYouMightLike]

4:15 of your last video, the pin was definitely in there. Commenting before I even finish this video so hopefully it all works out!

[@MAD450r2]

when installing that front clutch portion you should try putting anti sease on it so will come off a bit easier in future

[@ericpeterson9051]

If you look back on your assembly video the pin was on the water pump shaft when you put it together so if you're still in the case or it fell out when you drained it before you took the side case off

[@garyallensworth9882]

what a testament to patience dude that thing was a bear! need to donate to local vocational school so they always have something to work on! lol great work!

[@marcswinnen9100]

You are a genious and you have fun i see your videos i can not stop looking 😊

[@petemartus6712]

That's what I like about you,it got to be perfect before you left it go.you don't give up on a problem.

[@2vintageDeamonFan]

Great video as always

[@danburch9989]

I would want to know how that pin fell out and why. That's a critical part like the proverbial nail in the horse's shoe eventually led to the loss of the battle. That pin has to be somewhere. You have amazing patience to work on such difficult machines that aren't designed for easy maintenance and repair. I would get too frustrated.

[@862057]

Wow that turned out nice. That yellow wire from the solenoid probably goes to a safety switch that connects to ground to prevent it starting in a certain situation. The reason it showed positive was the positive voltage on the green wire was traveling through the solenoid coil and coming out the other side to the yellow, and you will see that voltage if that side is not grounded.

[@RobertKeefie]

That water pump may be what messed it up before you bought it nice work your doing

[@jayjudd6518]

❤ Great out come hope to see you use it more if you don’t sell or trade it off.😊😊😊

[@brianparker6811]

The way you handle frustration is very impressive

[@RobertKeefie]

Nice work good job

[@jeffreybunch3959]

I think the pin come out of the water pump gear is what mest up the plastic gear. I love watching your videos. You do good work. 👍🔧

[@jeffreybunch3959]

I think you got that piece out of that engine. 👍

[@tobar832]

something dropped when you pulled the cover, maybe dropped in oil or floor, check the video...

[@bobross8531]

Another great video 👍

[@johndevries87654]

The doors don’t stay closed 😂but everthing is ok 😂😂😂😂