Frigidaire Freezer Control Board Replacement Part

Symptoms: The freezer high temperature alarm goes off, but the freezer doesn't kick on. You reset it by unplugging for 30 minutes. It works again, but then the problem repeats itself a couple of days later.
Solution: Your freezer control board needs to be replaced. Don't call a repairman--this is the easiest repair I've EVER done--almost as easy as unplugging a cord from a power source and plugging it in again. Also, don't waste your money buying from a parts supplier. You can purchase this item for just $79 on Amazon: www.amazon.com/gp/product/B00...
This part fits Frigidaire and Electrolux upright freezers that have the control board mounted on the front door. You can check to see if it fits your freezer on Amazon before you buy.

[@elisacarlin6470]

This video saved us from having to have a repair man or worse, having to buy a new freezer. Literally saved us anywhere from 300.00 to 900.00. Thank you sir. Got the part from Amazon, replaced it like you told us to and Walla, it is working perfect. Thank you for posting this. 😊

[@ernieladrido4873]

Thank you sharing, I have the exact the same problem but my freezer is a Kenmore upright freezer. I researched and the same part number that you have and it crossed with the one on my freezer so I ordered it through Amazon and when I received it, got it installed and like you, I got it fix.the only difference is now I have two freezer 😂😂😂 I got tired of plugging the old one so I went to Home Depot and buy another one again thanks for sharing

[@todddelong1302]

i looked all over for days on youtube for an explanation like yours, I may make a video if that fixes my freezer, great job.

[@marydesousa5981]

THANK YOU!!! I had a tech come out once while my freezer was still on warranty, and I watched how insanely EASY it was to switch out the control board. Thank you for providing the part number! You are awesome!

[@nickynix3272]

Thanks, having same issues as you described

[@kennyrussell6833]

Im pretty sure this the problem with my freezer. I will come back and let you know if this fixes mine. Thank you homie!

[@josephnguyen2905]

Thank you thank you very much.

[@ZYOoOYZ]

Same problem with my Frigidaire freezer , one week before become full ice , heater not responding , front panel , lamp blinking , today early morning i call official Frigidaire service center and they replace the Control about $150 , and $50 for service , Now freezer work great as new .

[@rstephe]

Nice work. Thanks for sharing.

[@ilinkahollis4220]

Thanks for the information we’re looking for.

[@ilinkahollis4220]

Thanks for the information. I were wondering.

[@davidhazen2394]

Thanks for the video. I kept my old one just incase the new one goes bad

[@motokev2727]

Looks like the same controller on my GE freezer. I can't figure how to manually put it in defrost mode. I pushed the down arrow to warmest temp and then tapped the down arrow 3 times and a "d" was shown. It was blinking, but the defrost coil didn't heat up. How do you get defrost on yours ?

[@ernieladrido4873]

You’re the best

[@gingersnap77]

Ughhh! We thought this was our problem too. High temp light & beeping alarm was on. It was as if it got stuck in defrost mode bc it was constantly running with temp staying around 40%. So we ordered this part & replaced it in 2 days when it arrived. Unfortunately this did not fix ours so now we’re back to looking for suggestions as to what needs replacing next…compressor??

[@ddgardner5671]

The "door ajar" beeper on my Kenmore upright freezer kept going off, even though the door was closed. To make a long story short, I ended up replacing both the door switch and the control board. The beeping stopped for a few days, but it started again today. Could there be a problem with the wiring between the switch and the control board? Also, the light stays on even when the door switch is depressed. Do you have any ideas about how to fix it? Thank you.

[@danielwalsh4961]

Do you know how cold the different settings are? Can 1 be used as a refrigerator?

[@rozmery5920]

How to stop the larm on freezer

[@jjgriffmn]

Great video! I own the exact same freezer. Purchased in 2014. I am saving your video in case mine fails. The reason I came to KZbin though, I’m trying to figure out the ideal temperature or what number I should have my freezer on. I see yours is on 5. Just wondering if that is deal or if you have any advice? Thanks a lot.

[@Americas_most_wanted]

Would like to know the same as I just got the same model. I noticed he never replied but wondered if u kept yours on 5 or adjusted it

[@crystaldawn2736]

Ughhhh I can’t find any vids on my freezer. It’s a KENNMORE. About 9 years old. We had a storm the other day & then discovered the freezer stopped working. The interior light still comes on but that is all. How did your repair man test the control board? How did he know it was bad? My control board is the same part number as yours.

[@BarnyDaddy]

My Frigidaire would not turn off. Would not change temperatures. Ordered a replacement panel..

[@redaalherz343]

I purchase one. And worked for 4 days and stop working. What the matter?

[@claudiaraya6511]

Hi! I have a a similar problem with my freezer but the panel doesn't show the number so I can see at what number of cooling I have it at. If I press the upper arrow does that mean colder or hotter temperature. It just says 7 is the coolest setting. I hope my question makes sense.

[@mikekorpal9934]

Typically with this type of control 1 is the warmest setting and 7 is the coldest setting. you want to set the control near the midpoint 3 or 4 which should give you around 0 to -10. If the control is not displaying a number most like the control is not functioning properly. Remember if you are working with anything electric to be sure to unplug the freezer first.

[@ericksonsaavedra4255]

hello, what price and where can you buy it? store

[@detroit19531]

Thank you but mine's Little bit different.

[@shawnheck6878]

My display started showing Gibberish, and started getting warm. We pulled everything out and bought a smaller replacement chest freezer. I talked to a repairman after i couldn't diagnose the issue. He said there was a 95% chance it was this board, which it was. I bought a used one for $68 and it fired right up. This will be the first thing i'll look at if the problem ever returns. If anyone knows of a place that repairs these, I'd love to know. Then i'd always have a back up. Btw, Mine is a Kenmore. Exact same as this one shown.

[@tomypham9004]

Its 107.00 before tax on Amazon now. Inflation? 😂

[@paulettebarrow9791]

I have the same freezer and today my door ajar alarm it happened couple years bk so I unpluged it and its been fine, now today I did the same thing and the door alarm keeps going off theres nothing in the way , any suggestions??

[@kidastro22]

Same deal 🤦

[@zmaarykhan6207]

I have this one exact model.user control board show blinking 8.hi temp and door ajar is also blinking red.what should I do ??

[@redaalherz343]

Same my problem. Do you get the solution ?

[@zmaarykhan6207]

@@redaalherz343 I am from northern pakistan.sadly never find some one competent to repair it. we just bought another local brand.

[@TraZix]

The light in my freezer is off all the time. Will this fix that or will I need to get a door replacement switch instead?

[@mikekorpal9934]

make sure the bulb is good, then check to see if the door switch is sticking. If the switch is sticking, unplug the freezer, put a little WD40 on a rag or paper towel and try cleaning the switch plugger. Dry it off and plug the freezer back in to see if it works. If it still doesn't work replace the door switch.

[@brianhenning6030]

where is the model number on your actual freezer? I can't seem to find mine.

[@akanesoratobu8889]

Frigidaire Freezer Control Board Part# 297366100 mine was that . You can use a screw driver to carefully pop it out and the Part number will say on the control board inside.

[@JcUDE]

lol now it's $100