FRONT DOOR LOCK ACTUATOR/LATCH ASSEMBLY REPLACEMENT 2008 HONDA CR-V

REPLACEMENT FOR NON WORKING ACTUATOR. REPLACE AS A WHOLE LATCH ASSEMBLY MINUS THE CABLES.

[@jaimetrevino3664]

Can you please tell me what the Phillips-tipped socket that you use in the impact gun is called and where they sell it? Excellent video, very illustrative and you make it look very practical, congratulations.

[@Cargorage]

I used the #3 phillips screw to remove the latch 3x screws. I appreciate you commenting. Thanks.

[@jaimetrevino3664]

@@Cargorage When I saw your video on how to change the CRV actuator, I was encouraged and was able to change the 2 on the right side. Thank you very much for showing your experiences and knowledge. Greetings from Mexico and sorry for my English, I'm using a translator.🤷🏻‍♂️

[@Cargorage]

@@jaimetrevino3664 You're very welcome. I appreciate your comments.

[@brucefulcher2657]

My lock actuator went on my 2008 CRV. There are several videos on this repair. This is by far the best one. I replaced mind in less than one hour. Many thanks!!!

[@abrahamwilson884]

This helped me changed an actuator on an 08 Acura RDX. Every is pretty similar except the door lock. Thank you!

[@Cargorage]

You're welcome sir.

[@josephvandam4781]

When taking out the three screws that hold the latch to the door use an impact screwdriver with a PH3 bit that made it taking them out very easy without damage able to reuse

[@MF.Shadow]

I've watched a few other videos of replacing door lock actuators on the 3rd gen CRVs, this is by far the clearest video very detailed instructions 👍

[@Cargorage]

Thank you! God bless 🙏

[@scrappydoodaddy]

The rod won’t come out by hand

[@Cargorage]

If it doesn't, then use a flathead screw driver.

[@thobui9]

Bad design door lock actuators . No recall ? Manufacturer get away from this problem.

[@Cargorage]

Yeaaaaaah. Manufacture defect.