Haha I love how you threw my truck in there for the “if you have halogen bulbs” at 1:50. Almost missed her.
@HeadlightRevolution2 жыл бұрын
😉
@shelbyintheolds2 жыл бұрын
Only thing that I’d mention on headlights upgrade These are all new for projector housings, none mentioned for Reflector housings.
@elijahrobinson2362 Жыл бұрын
The factory lightning on my 14 FX4 does not suck. I’ve had it since new and am only now ‘upgrading’ because I want new headlight assemblies.
@erikmarshall6490 Жыл бұрын
i also have a 14 FX4. the factory lighting is trash.
@elijahrobinson2362 Жыл бұрын
@@erikmarshall6490 does yours have the optional projectors like the Limited and Platinum? Mine does. The right one looks dirty because I hit a deer 2 years ago and it cracked the rear of the housing, so water gets inside. Still works like new. The ones I’m putting in are the same style just a less costly aftermarket version.
@waredneck197711 ай бұрын
My 2014 XTR is shitty all around. I had 2017 FX4 fully loaded few months ago but got totalled out by insurance and had to settle on one i have now. 😢
@edkennedy7952 Жыл бұрын
Now i wish i still had my 14 Raptor.
@Berzilla Жыл бұрын
How do these new ones compare to the 2013 ford projection beam bulb ,thats is what is on my truck now ,so I am curious about how the wiring is going to be if I want to change them out ,or even if I can because they are factory install.
@black5heepX Жыл бұрын
So, if any of the factory 'ambient' lights fail, what kind are they? In the event that this occurs, asking for a '14 Platinum.
@lloydbuchanan58542 жыл бұрын
What is not shown is how to get the wire harness through the rubber grommet. I maybe missing something in the video, but it required my cutting the grommet to allow the wire harness black connector to pass through, then I could hook up the harness and push grommet and LED light back into the truck.
@HeadlightRevolution2 жыл бұрын
Good info!
@cxmico7202 Жыл бұрын
Hi can you post the link for the reflector change to led morimoto turn signal light? Cant find it for some reason. That's the only thing im missing to finish my order
Hello I want to upgrade to 3157: GTR I-LED ULTRA bulbs for my 2013 Ford F-150 Do I need to order the anti-hyper flash adapter?
@HeadlightRevolution2 жыл бұрын
If these bulbs are for your Turn Signals, you will indeed need resistors (One resistor per bulb) when installing! We carry kits for each vehicle on our website, just enter your vehicle info and hit search! www.headlightrevolution.com/
@franklogan4942 жыл бұрын
Hello, does anyone know if you need a special tool to remove the black clip from a H4 HID High Beam wire, thank you.
@HeadlightRevolution2 жыл бұрын
You do not.
@franklogan4942 жыл бұрын
@@HeadlightRevolution Thank you, I tried to pry them off with two small screw drivers and it will not disconnect.
@drmo4952 жыл бұрын
I have a question please..i have peugeot 508 with 35 watt hid bulb..can i change these hid bulbs with 55 watt led bulbs without complications ?? Many thanks
@HeadlightRevolution2 жыл бұрын
You would have to change the ballasts, not the bulbs. But this would slowly burn the projector bowls resulting in less light output.
@drmo4952 жыл бұрын
Thank you so much
@ilc-nl3yy2 жыл бұрын
Will these fit on a 2012 Ford Expedition?
@HeadlightRevolution2 жыл бұрын
Not sure!
@aaronb6727 Жыл бұрын
No thanks. I'll just pop the mirror out(like Morimoto shows) and use the connectors instead of cutting wires
@waredneck197711 ай бұрын
Tailgate doesn't have the "tail gate assist"? What kind of $100k+ truck doesn't have tail gate assist? POS Ford lol.